ThomasNet Industrial Newsroom -

Stainless Steel Electrodes weld wrought and cast alloys.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:37 -0500

Bare wire and covered stainless steel electrodes, Arcos 309/309L are available in dia from 0.035 - 3/16 in. Covered electrodes are offered in 3 different coatings, -15, -16, and -17 and in standard dia from 3/32 - 3/16 in., as well as non-standard dia up to 0.250 in. Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) units can be used for welding Type 304 and similar base metals. They are suited for general fabrication, automotive exhaust systems, and nuclear power facilities.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Metal Cored Electrode suits robotic/automated applications.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:43 -0500

Endurance E70C-6M-H4 was developed to produce single, consistent wire surface that results in continuous, uninterrupted feeding and consistent arc starts even under difficult of conditions. Beads are smooth and well washed with even edges and minimal silicon islands. Electrode is available in 0.035, 0.045, 0.052, 1/16, 5/64, 3/32 and 1/8 in. dia. and can be used for heavy sheet metal fabrication, automotive applications, structural work, pipe welding, and water heater welding.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Welding Electrodes suit power generation industry components.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:08 -0500

Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as headers and main steam piping. It is available in diameters from 3/32 to 3/16 in.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Nickel Flux Cored Electrode withstands harsh environments.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:13 -0500

Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode suits applications in wide range of temperatures as well as chloride contaminated environments.

This story is related to the following:
Welding Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Welding Electrodes | Nickel Welding Wire | Flux Cored Wire

Nickel-Bearing Electrode produces less spatter or slag.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:18 -0500

Available in 0.035, 0.045, 0.052 and 1/16 in. dia., low slag, low alloy, metal cored electrode, Select 80C-Ni1LS facilitates painting after welding. It is designed for welding of fine grained or low alloy steels requiring moderate tensile strength and good subzero CVN toughness, such as ASTM A203, Gr E, A302, A575 and A633. These steels are utilized in fabrication of earthmoving machinery and buckets, offshore equipment, and mining machinery.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Electrodes offer increased corrosion resistance.

info@productnews.com (ThomasNet News) — Wed, 09 Sep 2009 08:36:01 -0500

Built with lower carbon contents to reduce intergranular carbide precipitation, Arcos 308/308L bare wire and covered stainless steel electrodes are designed for welding food, brewery, and pharmaceutical equipment in nuclear facilities and general structural applications. Bare wire (ER308/308L) and covered (E308/308L) electrodes are used for welding similar materials including AISI grades 301, 302, 304, 305, and are available in diameters from .035-3/16 and 3/32-3/16 in., respectively.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Metal Cored Electrodes join high strength steels.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:19 -0500

Developed to operate with Ar/CO2 shielding gas mixtures, Select 100C-K3 is intended for single and multiple pass welding of some carbon and certain low alloy steels, where minimum tensile strength of 100,000 psi is required in deposited weld metal, while Select 110C-K4 is suited for applications where 110,000 psi is needed. Both are available in .035, .045, .052, and 1/16 in. diameters. Smaller diameters can be used in all position welding by utilizing pulsed power or short arc transfer.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Electrodes are suited for high-strength steel welding.

info@productnews.com (ThomasNet News) — Thu, 11 Jun 2009 08:33:55 -0500

Arcos 312 bare wire (ER312) and covered (E312) stainless steel electrodes are designed for welding stainless steels to mild steels as well as high-strength steels. Both are suited for welding dissimilar joints, especially if one base metal is stainless and high in nickel content. Weld deposit is 2-phase, and even with dilution from austenitic forming elements, such as nickel, microstructure is 2-phase and resistant to weld metal cracks/fissures.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Electrodes suit low-hydrogen, low-alloy welding applications.

info@productnews.com (ThomasNet News) — Wed, 20 May 2009 09:28:43 -0500

Excalibur 7018-A1 MR is recommended for welding 0.5% molybdenum steels, Excalibur 8018-B2 MR is suited for 1.25% chromium, and Excalibur 9018-B3 MR is designed specifically for welding 2.25% chromium and 1% molybdenum steels. All are designed for all-position welding of low alloy steels and are capable of exceeding AWS minimum strength requirements after long term post-weld heat treatment. Low hydrogen stick electrodes feature 3/32 in. dia and are 12 in. long.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Stick Electrode targets low-hydrogen applications.

info@productnews.com (ThomasNet News) — Tue, 19 May 2009 08:32:19 -0500

Designed for structural fabricators working in flat and horizontal positions, Excalibur® 7028 provides smooth, even burn-off and clean weld puddle. Optimal arc characteristics across wide current range give welders ability to deposit fillet and lap welds without undercutting. With Charpy V-notch test results typically falling in range of 60-142 ft-lbf at -40°F, electrode is suited for ships and bridge structures, storage tanks, and general heavy industrial fabrication jobs.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Stick Electrodes simplify welding during boiler tube repair.

info@productnews.com (ThomasNet News) — Tue, 12 May 2009 08:42:53 -0500

Hobart® Boilermaker(TM) low-alloy stick electrodes E7018-1, E7018-A1, E8018-B2, and E9018-B3 feature low spatter levels and removable slag to minimize post-weld cleaning and rework. They operate from 75-90 A and can be used to weld on thin- and heavy-walled boiler tubes without burn-through. Units accommodate variety of welding styles. They are available in 3/32 and 1/8 in. dia models in 14-inch lengths and 3/32 in. dia model with 12 in. length that can be bent to fit tight spaces.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Stainless Steel Electrode suits thin sheet metal welding.

info@productnews.com (ThomasNet News) — Fri, 08 May 2009 09:08:22 -0500

Metal cored, ferritic stainless steel SelectAlloy 430L-Cb has high chromium content with columbium (niobium) stabilization that delivers heat and corrosion resistance to welded base metals. Available in .045, .052, and 1/16 in. dia, electrode is capable of handling poor fit and gaps, and delivers less burn through and less spatter. Applications include manifolds, converters, mufflers, and tubular automotive exhaust components made of 430 grade materials.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes | Stainless Steel Welding Wire

Stainless Steel Electrodes resist intergranular corrosion.

info@productnews.com (ThomasNet News) — Fri, 17 Apr 2009 08:38:16 -0500

Available in diameters from .035-3/16 in., ER316/316L bare wire electrode serves as general purpose electrode for GMAW, GTAW, and SAW welding. Covered electrode E316/316L is available with 3 different coatings; -15, -16, and -17, and in standard diameters of 3/32-3/16 in., as well as non-standard diameters up to .250 in. Designed with low carbon levels, electrodes are suited for welding low carbon, molybdenum-bearing, austenitic alloys.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

SS Electrodes are designed for welding in all positions.

info@productnews.com (ThomasNet News) — Fri, 06 Mar 2009 08:29:37 -0500

SelectAlloy 312-AP and SelectAlloy 316H-AP, austenitic stainless steel, 2 flux cored electrodes, are available in dia of .045 and 1/16 in. With metal composition of 30% chromium, 9% nickel and 0.1% carbon, SelectAlloy 312-AP produces two-phase weld metal with ferrite in austenitic matrix which makes weld metal crack resistant. Composed of 19% chromium, 12% nickel, 2.5% molybdenum and carbon content of 0.4-0.8%, SelectAlloy 316H-AP suits application in pulp and paper industry.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

SS Bare Wire Electrode is available in .035-3/16 in. dia.

info@productnews.com (ThomasNet News) — Thu, 19 Feb 2009 08:34:18 -0500

Designed for GMAW and GTAW welding, stainless steel, bare wire electrode, Arcos 308LSi features higher silicon content, and is corrosion and intergranular corrosion resistant. Product is utilized for welding 301, 302, 304, 304L, 308 and 308L stainless steels, and can also be used to weld Type 347 for service temperatures up to 600°F. Applications include nuclear power, automotive, pharmaceutical and food service industry.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Welding Electrodes minimize cracking and corrosion.

info@productnews.com (ThomasNet News) — Fri, 13 Feb 2009 08:30:00 -0500

SelectAlloy 307T0-3 contains weld metal composition of 21% chromium, 10% nickel, 4% manganese, and 1% molybdenum and is utilized to weld armor plate as well as join carbon and low alloy steels to SS. It is also suited for surfacing or welding over gaps. Composed of 20% chromium, 10% nickel, and 0.7% columbium, SelectAlloy 347T0-3 is designed to weld Types 321, 347, and 348 SS. Self-shielded, flux-cored, austenitic SS electrodes are available in .045, 1/16, and 3/32 in. dia. units.

This story is related to the following:
Electronic Components and Devices
Welding Equipment and Supplies

Search for suppliers of: Stainless Steel Electrodes | Welding Electrodes

Electrodes resist stress corrosion cracking.

info@productnews.com (ThomasNet News) — Mon, 19 Jan 2009 08:42:08 -0500

Arcos 2209 bare wire (ER2209) and covered (E2209) stainless steel electrode resist stress corrosion cracking in environments containing hydrogen sulfide and chlorides. Bare wire electrode is available in dia from .035 - 3/16 in., while covered version is offered in 3/32 - 3/16 in. dia. Both models provide high resistance to intergranular corrosion and pitting. Arcos 2209 electrodes are designed for joining 22% chromium duplex stainless steels, including 2205.

This story is related to the following:
Electronic Components and Devices
Welding Equipment and Supplies

Search for suppliers of: Stainless Steel Electrodes | Welding Electrodes

Stainless Steel Electrode suits high temperature welding.

info@productnews.com (ThomasNet News) — Mon, 12 Jan 2009 08:31:04 -0500

Featuring modified 310 chemistry with nominal composition of 26% chromium, 21% nickel, and 5% manganese, SelectAlloy 310G-C metal cored electrode provides smooth, spray arc transfer with low spatter and little or no slag. Suited for making small butt, lap, and fillet welds on thin material, product is utilized to weld 310, as well as 410 and 430 SS where preheating or post-weld heat treatments are not possible. Electrode is available in .045 and 1/16 in. dia.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes | Welding Rods, Wire & Electrodes | Stainless Steel Welding Wire

Electrodes suit downhill pipe welding applications.

info@productnews.com (ThomasNet News) — Mon, 12 Jan 2009 08:30:59 -0500

Intended for fill and cap pass welding, as well as pipe repair and hot tapping applications, Pipeliner® LH-D80, LH-D90, and LH-D100 are recommended for use with up to X70, X80, and X90 grade pipe, respectively. With Integrated Silicate Technology(TM) electrodes feature extremely low hydrogen levels classified as AWS H4R - 4 mL of hydrogen/100 g of metal, minimizing chances of hydrogen-induced cracking. Easy Strike® tapered tip enables touch start arc initiation for minimal starting porosity.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Stick Electrode offers 70,000 psi minimum tensile strength.

info@productnews.com (ThomasNet News) — Tue, 23 Dec 2008 07:35:13 -0500

Available in 1/8, 5/32, 3/16, 7/32, and ¼ in. dia, Rocket 7024 stick electrode features self-removing slag system that completely releases slag. Electrode is designed for DCEN, AC, or DCEP welding, and also suits general plate, tank and construction equipment fabrication, and SMAW applications. Offering smooth arc and low spatter levels, product meets AWS E7024 requirements for horizontal fillet and flat-position electrodes and welds through moderate dirt and rust.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes