ThomasNet Industrial Newsroom -

Metal-Cored Wire suits welding at sub-zero temperatures.

info@productnews.com (ThomasNet News) — Wed, 18 Nov 2009 08:41:41 -0500

Usable with 75% Argon/25% CO2 or 98% Argon/2 % O2 shielding gas mixtures, Tri-Mark® Metalloy® 80N1 provides tensile strengths ranging from 85,900 to 90,000 psi, respectively. Wire is designed for both single- and multi-pass welding on 1/2 Ni-1/4 Mo, 1 Ni-1/4 MO, and 1-1/2 Ni-1/2 Mo steels. It can also be used for welding weathering steel applications where color match is not critical. Available in .045, .052, and 1/16 in. diameters, wire handles temperatures down to -50°F.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Wire

Flux-Cored Welding Wires target chrome-moly applications.

info@productnews.com (ThomasNet News) — Tue, 17 Nov 2009 08:44:52 -0500

Offering all-position welding capabilities, FabCO® XTREME B2, XTREME B3, and XTREME 120 operate on DCEN Direct Current Electrode Negative. XTREME B2 is suited for 1 ¼ Chrome - ½ Moly steels, while XTREME B3 deposits weld chemistry needed for 2 ¼ Chrome - 1 Moly steels. Designed to meet DNV Y69MS (H5) for welding on offshore jackup rigs, XTREME 120 wires produce welds in 120-130 ksi tensile strength range, yield strengths over 105 ksi, and Charpy impact properties of 51 lb-ft at -76°F.

This story is related to the following:
Welding Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Welding Wire | Flux Cored Wire

Stainless Steel Electrodes weld wrought and cast alloys.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:37 -0500

Bare wire and covered stainless steel electrodes, Arcos 309/309L are available in dia from 0.035 - 3/16 in. Covered electrodes are offered in 3 different coatings, -15, -16, and -17 and in standard dia from 3/32 - 3/16 in., as well as non-standard dia up to 0.250 in. Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) units can be used for welding Type 304 and similar base metals. They are suited for general fabrication, automotive exhaust systems, and nuclear power facilities.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Metal Cored Electrode suits robotic/automated applications.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:43 -0500

Endurance E70C-6M-H4 was developed to produce single, consistent wire surface that results in continuous, uninterrupted feeding and consistent arc starts even under difficult of conditions. Beads are smooth and well washed with even edges and minimal silicon islands. Electrode is available in 0.035, 0.045, 0.052, 1/16, 5/64, 3/32 and 1/8 in. dia. and can be used for heavy sheet metal fabrication, automotive applications, structural work, pipe welding, and water heater welding.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Shut-Off Valve provides diesel engine safety.

info@productnews.com (ThomasNet News) — Wed, 04 Nov 2009 08:43:25 -0500

Suited for underground mining or similar applications calling for Group 1 certification, Chalwyn SVX electronically operated air intake shutdown valve has non-sparking zinc alloy body and solenoid cover. Failsafe valve helps to prevent potential explosions from diesel engine ignition wherever there is combustible gas, vapor, or dust hazard. Designed for air intake diameters from 1½-8 in., butterfly valve can be flange or hose mounted.

This story is related to the following:
Welding Equipment and Supplies
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Shut-Off Valves | Engine Valves | Electronically Operated Valves | Butterfly Valves | Air Valves

Welding Electrodes suit power generation industry components.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:08 -0500

Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as headers and main steam piping. It is available in diameters from 3/32 to 3/16 in.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Air-Cooled TIG Torches promote operator comfort, control.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:05 -0500

Designed for maneuverability, Crafter Series(TM) CS125A and CS200A models carry respective welding capacity ratings of 130 Adc/100 Aac and 200 Adc/150 Aac at 60% percent duty cycle. Torch body weight helps minimize welding operator fatigue, while D-Handle(TM) design lets operator orient torch by feel and improves overall torch control. Also, air-cooling capacity eliminates need for water-cooled systems and provides portability for field applications.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding & Cutting Torches | TIG Torches

Portable Dust and Fume Collector offers 3-stage filtration.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:45 -0500

Zephyr® III features metal filter that functions as spark trap, main filter for fine particle removal, and carbon filter for odors and gases. Either Gold Cone® HemiPleat® standard- or high-efficiency or DuraPleat® washable filters can be used. System includes manually activated Venturi-assisted pulse cleaning system and quick-clamp for simplified cartridge sealing and removal. Operated via 110 v/1 ph 60 Hz power cord, it offers airflow capacity of 700 cfm at capture hood.

This story is related to the following:
HVAC
Welding Equipment and Supplies

Search for suppliers of: Fume Extraction Systems | Dust Collecting Systems | Air Filtration Equipment & Systems | Welding Fume Collectors

Nickel Flux Cored Electrode withstands harsh environments.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:13 -0500

Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode suits applications in wide range of temperatures as well as chloride contaminated environments.

This story is related to the following:
Welding Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Welding Electrodes | Nickel Welding Wire | Flux Cored Wire

Welding Nozzle Coating Service produces self-cleaning nozzles.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:02 -0500

Secoa technology processes untreated welding nozzles supplied by customers and transforms them into PerfectArcs(TM) nozzles with extended life design to minimize nozzle cleaning time for any manual or robotic MIG welding process. Self-cleaning PerfectArcs(TM) nozzles eliminate need for labor-intensive spatter release sprays and dips. Products shed spatter, permitting shielding gas to flow properly and ensuring proper, clean welds.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Welding Equipment and Supplies
Services

Search for suppliers of: Welding Nozzles | Coating Services

Metal-Cored Wire is designed for robotic welding.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:28:59 -0500

Matrix(TM) wire is designed to optimize performance in high-volume robotic welding applications, especially those used in heavy equipment manufacturing. Arc starting and wire feedability characteristics result from proprietary technology that has also been shown to extend life of robotic gun liners and eliminate buildup at drive rolls. Wire creates consistent weld bead shape, offers crack resistance, and minimizes silicon island formation.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Wire

Nickel-Bearing Electrode produces less spatter or slag.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:18 -0500

Available in 0.035, 0.045, 0.052 and 1/16 in. dia., low slag, low alloy, metal cored electrode, Select 80C-Ni1LS facilitates painting after welding. It is designed for welding of fine grained or low alloy steels requiring moderate tensile strength and good subzero CVN toughness, such as ASTM A203, Gr E, A302, A575 and A633. These steels are utilized in fabrication of earthmoving machinery and buckets, offshore equipment, and mining machinery.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Measurement System records spot weld force.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:09 -0500

Storing all information in Tablet PC or laptop for each recording, Bluetooth-enabled weld probe lets technicians follow schedule of maintenance for each welder via GUI. Sensor links up with PC upon power-up, and each clamping force measurement is stored automatically, along with date, time, and designation of welder. Upon completion of each measurement, technician is directed to next welder on list. When audit rounds are complete, technician may print/save audit data for QC.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers
Welding Equipment and Supplies

Search for suppliers of: Force Measuring Instruments | Force Measuring Gages | Welding Force Gages

Electrodes offer increased corrosion resistance.

info@productnews.com (ThomasNet News) — Wed, 09 Sep 2009 08:36:01 -0500

Built with lower carbon contents to reduce intergranular carbide precipitation, Arcos 308/308L bare wire and covered stainless steel electrodes are designed for welding food, brewery, and pharmaceutical equipment in nuclear facilities and general structural applications. Bare wire (ER308/308L) and covered (E308/308L) electrodes are used for welding similar materials including AISI grades 301, 302, 304, 305, and are available in diameters from .035-3/16 and 3/32-3/16 in., respectively.

This story is related to the following:
Welding Equipment and Supplies
Electronic Components and Devices

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes

Purge Monitor is designed for welding applications.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:29:53 -0500

Argweld® Weld Purge Monitor, MKV version, provides welders and QC personnel with information about Oxygen content in vicinity of weld joints. This allows optimization of welding conditions while minimizing rejects as well as gas and time consumption. Each monitor comes with stainless steel sampling probe, 2 m length of rubber hose, vacuum sampling hand pump, and carrying strap. It can be used to continuously monitor oxygen level and check purge gas quality at frequent intervals.

This story is related to the following:
Sensors, Monitors and Transducers
Welding Equipment and Supplies

Search for suppliers of: Welding Monitors

Portable Fume Exhauster removes fumes, odors, and smoke.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:49 -0500

Place-A-Vent Model PFE can remove/ventilate fumes produced by welding, brazing, soldering, laser cutting, and plasma cutting. Product comes in ½ hp model, PFE-350 and 1 hp version, PFE-750. Model PFE-350 has standard 4 x 8 in. hood and inlet/outlet dia of 4 in., while PFE-750 has standard 8 x 8 in. hood and inlet/outlet dia of 6 in. Features included are high pressure fan unit fabricated with 14 Ga steel housing, self-cleaning radial wheel, 25 ft of discharge hose, and 10 ft of intake hose.

This story is related to the following:
Chemical Processing and Waste Management
HVAC
Welding Equipment and Supplies

Search for suppliers of: Odor Eliminators | Smoke Extractors | Welding Fume Exhausters

Welding Fume Exhaust Unit offers flexible deployment.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:46 -0500

Designed for continuous operation, Mobiflex® 100-NF is suited for construction or shop welding applications where removing welding fume from source is needed without filtration. Portable, low-vacuum system can adapt to various work locations and welding applications, including stick, TIG, MIG, and flux-cored. Components include 16 ft house/hood set and 16 ft exhaust hose set, which can also be used to extend hose/hood set to full length of 32 ft.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Fume Exhausters

Flux-Cored Wire suits heavy welding applications.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:46 -0500

With low fume generation rates, UltraCore® 70C Gas Shielded Flux-Cored Wire optimizes cleanliness and visibility while welding. Diffusible hydrogen levels are controlled at H8 AWS classification to provide resistance to hydrogen induced cracking. Optimized bead stacking and slag removal minimize clean-up time for multi-pass welding. Wire meets requirements of structural fabrication, heavy equipment, and ship building industries.

This story is related to the following:
Welding Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Welding Wire | Flux Cored Wire

Flux-Cored Wire resists hydrogen-induced cracking.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:46 -0500

Designed to meet requirements of heavy equipment, structural fabrication, and mining industries, gas-shielded UltraCore® 75C provides optimized stackability for welding thick steel sections. Basic slag system offers resistance to hydrogen induced cracking in many applications, including difficult-to-weld materials and restrained joints. Charpy V-notch test results are capable of exceeding AWS E70T-5C-JH4 impact requirements of 20 lbf-ft at -40°F.

This story is related to the following:
Welding Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Welding Wire | Flux Cored Wire

Mobile Fume Extractor uses MERV 15-rated nanofiber filters.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:41 -0500

Designed specifically for welding applications, FILTAIR MWX-D features 875 cfm airflow at hood and captures up to 95% of small welding fume particulates. MERV 15 rating means filter is 90% effective at filtering 0.3-1 micron sized particles found in welding fume. Extraction arm, available in 7, 10, and 12 ft lengths, is supported externally, so air flows through unobstructed. Additional features include filter pressure gauge and metal base with large rear wheels for mobility.

This story is related to the following:
HVAC
Welding Equipment and Supplies

Search for suppliers of: Fume Extractors | Welding Fume Exhausters | Welding Fume Collectors