ThomasNet Industrial Newsroom -

Enclosed-Case Welder can also be used as generator.

info@productnews.com (ThomasNet News) — Tue, 24 Nov 2009 08:33:41 -0500

Driven by 23 hp Kohler® gasoline engine, Ranger® 225 delivers smooth DC welding output and 10,500 W peak (9,000 W continuous) AC generator power. Fully enclosed case protects engine in rugged environments while also lowering noise emission. Welding output, selectable as DC+ for deep penetrating arc or DC- for less penetration, is designed for range of stick electrodes. Various basic jobs can be accommodated with 225 A/25 V welding output for stick, TIG, MIG, and flux-cored arc welding.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Arc Welding Generators | Engine Driven Welders

Portable AC Welder/Generator provides up to 140 A output.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:29:59 -0500

Designed exclusively for AC stick welding, Bulldog(TM) 140 delivers up to 16.7 A continuous power from 240 Vac receptacle and up to 33.3 A continuous power from 120 Vac duplex receptacle. Unit provides arc welding on steel, stainless steel, cast iron, and hardfacing with electrodes ranging from 3/32-1/8 in. Equipped with ¼ in. diameter tube frame, welder features Subaru® 10 hp Model EX30 OHC gasoline engine with one-pull starting, cast iron cylinder liner, and automatic shutdown for low oil level.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Engine Driven Arc Welders | Arc Welders | Arc Welding Generators

Welding Power Source features portable, multi-process design.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:45 -0500

Designed for welding wide variety of materials and applications, Power Wave® S350 features PowerConnect(TM) Technology, allowing users to connect automatically to input power ranging from 200-600 V, 50 or 60 Hz and single- or 3-phase with no manual reconnect. IP23-rated unit includes Tribid(TM) Power module, iARC(TM) digital controls for arc stability, and Ethernet connection. Production Monitoring(TM) software lets user track equipment usage, store weld data, and configure limits.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Automatic Welders | Arc Welders | Welding Power Supplies

Jobsite Welder integrates air compressor and generator.

info@productnews.com (ThomasNet News) — Thu, 19 Mar 2009 08:32:57 -0500

Designed to meet jobsite reliability standards, multifunctional Trailblazer® 302 Air Pak(TM) is gasoline engine-driven welder, generator, and air compressor. This self-contained power source welds at up to 350 A and provides 13,000 W of Accu-Rated(TM) generator power as well as 26 cfm at 100% duty cycle. Rotary screw air compressor delivers 70-160 psi of air, with no storage tank required, while 30 hp Kohler gas engine weighs 771 lb and measures 59½ x 20 x 34¼ in.

This story is related to the following:
Welding Equipment and Supplies
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Welding Power Supplies | Arc Welding Generators | Generators

Engine-Driven Welder offers multi-process capabilities.

info@productnews.com (ThomasNet News) — Tue, 03 Mar 2009 08:29:51 -0500

Offered in compact case, Vantage 500 Perkins® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9 hr of welding at 500 A/40 V/100% duty cycle output, or 33 hr at high idle.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Arc Welding Generators | Engine Driven Welders | Multiple Process Welders

Portable Welder suits on-site welding applications.

info@productnews.com (ThomasNet News) — Tue, 03 Mar 2009 08:29:50 -0500

Designed as dc stick welder and ac power generator, Outback® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off truck beds. Unit's high-capacity ac generator provides 5,700 W of peak and 5,200 W of continuous power.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Welding Equipment and Supplies

Search for suppliers of: Power Generators | Portable Spot Welders | Arc Welding Generators | Engine Driven Welders | MIG Welders

Welder Generator provides up to 6,500 W peak power.

info@productnews.com (ThomasNet News) — Tue, 10 Feb 2009 08:32:30 -0500

Wildcat® 200 Welder Generator features fully enclosed case that protects 14 hp Subaru engine and internal welding components from damage. It includes single 220 V outlet and 4 x 120 V outlets, offering 5,500 W continuous power and 200 A DC Stick and TIG welding output. Unit is 345 lb and includes 7 gal gas tank, coarse range switch, fine control dial, front panel ignition switch, and back-up recoil on rear. Auto-Idle feature minimizes fuel consumption and noise.

This story is related to the following:
Welding Equipment and Supplies
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Arc Welding Generators | Power Generators

Mobile Tractor aids in-field submerged arc welding.

info@productnews.com (ThomasNet News) — Mon, 12 Jan 2009 08:30:59 -0500

Configurable for 3- or 4-wheel operation to support on or off track use, Cruiser(TM) Subarc Tractor Wirefeeder brings Power Wave® AC/DC 1000® inverter power source to fabrication yards. Self-propelled submerged arc welding tractor, designed for welding large joints on heavy plate, features rated output of 1,000 A @ 100% duty cycle and weld deposition rates up to 60 lbs/hr. Power Feed(TM) 10S wire drive design, rotating in 2 directions for any torch angle, feeds up to 7/32 in. dia wire.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies

TIG Power Sources provide consistent arc starting.

info@productnews.com (ThomasNet News) — Fri, 24 Oct 2008 07:44:43 -0500

Suited for portable applications, Dynasty® 200 AC/DC TIG/Stick and Maxstar® 200 DC TIG/Stick Power Sources feature Blue Lightning(TM) technology, which provides reliable high-frequency arc starts over input range of 1-200 A. Operator enters chosen tungsten size from 0.020-0.125 in., and Blue Lightning sets optimal starting parameters. In addition, Dynasty 200 features advanced AC waveforms to optimize arc characteristics for various applications and operator preferences.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies | TIG Welders

Portable Welder suits multiple processes and materials.

info@productnews.com (ThomasNet News) — Fri, 17 Oct 2008 07:36:04 -0500

With PowerConnect(TM) Technology, Power Wave® C300 Wire Feeder Welder enables user to automatically switch from 200-600 V, 50 or 60 Hz, and single- or 3-phase welding with no manual reconnect. Tribrid(TM) Power Module offers 88% efficiency at 250 A and power factor of 0.97. Welder includes 8 memory locations to recall procedures with ability to lock in operator limits. Rated IP23, C300 is suitable for production welding, construction, aerospace, automotive repair, and general fabrication.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies | Welding Systems | Multiple Process Welders

Portable Power Sources optimize orbital welding efficiency.

info@productnews.com (ThomasNet News) — Fri, 26 Sep 2008 07:39:49 -0500

When used with suitable welding heads, Aristo power sources promote productivity and quality when welding tubes for various industries. Adaptable design of Aristo MechTig C2002i enables systems to be configured to precisely match application requirements. Able to deliver 180 A at 35% duty cycle or 110 A at 100%, it incorporates water cooler, controller, GUI, program library, and auto-generation of welding programs. Aristo MechTig 3000i/40000i suit higher current applications.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies

Power Sources target heavy-duty welding applications.

info@productnews.com (ThomasNet News) — Fri, 19 Sep 2008 07:44:33 -0500

Offering hot-start and crater fill functions, Origo Mig 4002c, 5002c, and 6502c are available with Origo MA23, MA24, or Aristo MA6 control panels, which allow metal inert/metal active gas welding and manual metal arc welding. LogicPump automatically starts cooling water pump when water-cooled torch is connected to wire feeder. Used in conjunction with ESAB PSF torch, TrueArcVoltage System guarantees correct arc voltage regardless of voltage drop in welding cables.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies

Power Solutions are optimized for sub arc process.

info@productnews.com (ThomasNet News) — Fri, 12 Sep 2008 07:36:23 -0500

DC Sub Arc Solutions include Sub Arc DC 650 and Sub Arc DC 1000 power sources, heavy-duty, 4-wheel-drive Sub Arc Tractor, and complete sub arc system components. Sub arc components, available separately or mounted on Millers Sub Arc Tractor, provide plug and play functionality, allowing users to get optimal results quickly.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled
Welding Equipment and Supplies

Search for suppliers of: DC Power Systems | Four Wheel Trucks | Welding Power Supplies

Welder Generator is fully enclosed for quiet, cool operation.

info@productnews.com (ThomasNet News) — Wed, 06 Aug 2008 08:07:43 -0500

Providing 10,500 W of generator power and up to 225 A of welding output, gas-engine driven Bobcat 225 features fully enclosed case, which directs hot air away from engine for cooler operation, ensuring full output, even in hot weather or when it is mounted in confined space with restricted airflow. Generator is available with Kohler 23 hp or Subaru/Robin 22 hp gas engine and is suited for MRO, farm and ranch, construction, and truck-mounted applications.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Arc Welding Generators

Welder Generator has enclosed case for engine protection.

info@productnews.com (ThomasNet News) — Fri, 01 Aug 2008 08:11:33 -0500

Suited for rugged onsite welding applications, Ranger® 225 GXT welder generator handles basic welding jobs with 225 A/25 V welding output for stick, TIG, MIG, and flux-cored welding as well as arc gouging. AC/DC welding output is designed for range of stick electrodes, such as Lincoln Electric's Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Generator offers 10,500 W peak single-phase ac generator power to meet high frequency needs, such as powering plasma cutter.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Welding Equipment and Supplies

Search for suppliers of: Power Generators | Arc Welding Generators

Welding Generator offers 24 hp Deutz engine option.

info@productnews.com (ThomasNet News) — Mon, 24 Mar 2008 07:38:55 -0500

Designed for construction fleets, small contractors, and pipe welding applications, PRO 300 provides 20-410 A of welding power, as well as 12,000 W of peak generator power. Single circuit board is housed in sealed environment, protected from heavy industrial applications. Digital voltage control enables operators to pre-set and maintain voltage, while Lift-Arc function creates consistent and positive arc starts, and Auto-Stop function allows welder to break arc without flaring.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Engine Driven Welders | Arc Welding Generators

Welding Power Supply provides up to 200 A and weighs 50 lb.

info@productnews.com (ThomasNet News) — Tue, 20 Nov 2007 07:40:53 -0500

Swagelok® welding system M200 features high-resolution, 12.1 in. color industrial touchscreen which enables users to choose from 1 of 3 forms to enter weld programs, including automatic weld schedule programming. It has automatic shield gas control, multilanguage capability, as well as universal voltage input from 100-230 V. Working with all available Swagelok weld heads, portable system includes 4 USB ports, Ethernet port, USB device port, VGA Output, and serial port.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies

Welding Inverters promote defect-free results.

info@productnews.com (ThomasNet News) — Mon, 01 Oct 2007 07:47:42 -0500

Suited for use in mash seam welding applications, 2 high-power WeldVerter(TM) Power Supplies feature WeldComputer® Adaptive Weld Controls. Each inverter can deliver up to 800 A continuous welding current at 1 kHz frequency and is able to operate in current, voltage, and power feedback modes. Monitoring all key welding parameters, system detects variations in process that could negatively affect weld quality and takes preprogrammed action to accommodate out-of-limits condition.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Welding Equipment and Supplies

Search for suppliers of: Welding Power Supplies | Power Inverters

AC/DC TIG Welders promote optimal low-end arc starts.

info@productnews.com (ThomasNet News) — Tue, 04 Sep 2007 08:16:02 -0500

Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features include Coolmate® 3X cooler, universally compatible with any torch.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: TIG Welders | Welding Power Supplies

Welder/Generator is offered with Deutz engine.

info@productnews.com (ThomasNet News) — Fri, 29 Sep 2006 07:44:45 -0500

With Deutz D2008L4 4-cylinder, water-cooled diesel engine, Vantage® 300 delivers dc welding output of 300 A at 32 V, 100% duty cycle. Engine runs at 1,800 rpm and is rated at 24 hp. It generates 12.5 kW peak, 3-phase, 240 Vac auxiliary power and 11.5 kW peak, single-phase ac auxiliary power. Fuel tank capacity of 15 gal enables Vantage 300 to run all day. Four process modes include CC-Stick, Downhill Pipe for stick, Touch-Start, and CV-Wire.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Engine Driven Welders | Arc Welding Generators