ThomasNet Industrial Newsroom -

Enclosed-Case Welder can also be used as generator.

info@productnews.com (ThomasNet News) — Tue, 24 Nov 2009 08:33:41 -0500

Driven by 23 hp Kohler® gasoline engine, Ranger® 225 delivers smooth DC welding output and 10,500 W peak (9,000 W continuous) AC generator power. Fully enclosed case protects engine in rugged environments while also lowering noise emission. Welding output, selectable as DC+ for deep penetrating arc or DC- for less penetration, is designed for range of stick electrodes. Various basic jobs can be accommodated with 225 A/25 V welding output for stick, TIG, MIG, and flux-cored arc welding.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Arc Welding Generators | Engine Driven Welders

Portable AC Welder/Generator provides up to 140 A output.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:29:59 -0500

Designed exclusively for AC stick welding, Bulldog(TM) 140 delivers up to 16.7 A continuous power from 240 Vac receptacle and up to 33.3 A continuous power from 120 Vac duplex receptacle. Unit provides arc welding on steel, stainless steel, cast iron, and hardfacing with electrodes ranging from 3/32-1/8 in. Equipped with ¼ in. diameter tube frame, welder features Subaru® 10 hp Model EX30 OHC gasoline engine with one-pull starting, cast iron cylinder liner, and automatic shutdown for low oil level.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Engine Driven Arc Welders | Arc Welders | Arc Welding Generators

MIG/Flux-Cored Welder offers heavy-duty wire drive.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:29:59 -0500

Intended for MIG and flux-cored welding on mild steel, stainless steel, and aluminum, 30-250 A-rated POWER MIG® 216 wire feeder/welder arrives spool gun ready to facilitate switch to aluminum wire welding. Diamond Core Technology(TM) provides forgiving arc, out-of-position control, and minimal spatter. MAXTRAC(TM) cast aluminum wire drive features dual-driven rolls, regulated wire feed speed, brass-to-brass gun connections, and wire-supporting split-wire guide systems.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: MIG Welders | Aluminum Welders | Welders | Flux Core Arc Welders (FCAW)

Flux-Cored Welding Gun delivers application versatility.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:36 -0500

In addition to 6 cable lengths from 8-25 ft, self-shielded Dura-Flux is available with various neck styles and small trigger guard for maneuverability. Heavy-duty contact tip insulator promotes heat resistance and permits shorter contact tip stickout to prevent arc-out against side walls of deep joints. Other options include large heat shield for blocking radiant heat from welding arc and direct plugs for Miller, Lincoln, Euro, and Tweco 4-wire feeders.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Guns

Spool Gun optimizes MIG aluminum welding.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:17 -0500

Suited for light- to medium-duty aluminum fabrication and repair work, Spoolmate(TM) 200 features handle-based wire feed speed adjustment and 20 ft power cable. Unit offers curved and extended barrel options as well as internal shielding gas line, optimizing ability to access tight joint configurations. Rated to 160 A at 60% duty cycle, Spoolmate 200 accepts .030 and .035 in. wire and plugs directly into Millermatic® 212 w/Auto-Set(TM) and Millermatic® 252.

This story is related to the following:
Welding Equipment and Supplies
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: MIG Welders | Welding Guns | Wire Feeders

Dual Wire Feeder extends work area of welders.

info@productnews.com (ThomasNet News) — Mon, 19 Oct 2009 08:37:50 -0500

Running .023-.052 in. wire up to 300 A, Millermatic® Reach Wire Feeder extends work areas of Millermatic 212 with Auto-Set(TM), 251, 252, and 350/350P MIG welders up to 40 ft and offers dual wire feeding capabilities. Users can switch between wire types or sizes without having to change spools. Connecting to welder via 10-pin Amphenol connectors, feeder holds wire spools up to 12 in. dia and retains welding output. Auto-Gun Detect(TM) recalls voltage and wire feed speed of active gun.

This story is related to the following:
Welding Equipment and Supplies
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Welding Systems | Wire Feeders

Air-Cooled TIG Torches promote operator comfort, control.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:05 -0500

Designed for maneuverability, Crafter Series(TM) CS125A and CS200A models carry respective welding capacity ratings of 130 Adc/100 Aac and 200 Adc/150 Aac at 60% percent duty cycle. Torch body weight helps minimize welding operator fatigue, while D-Handle(TM) design lets operator orient torch by feel and improves overall torch control. Also, air-cooling capacity eliminates need for water-cooled systems and provides portability for field applications.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding & Cutting Torches | TIG Torches

Pipe Welding System offers 1-button process changeover.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:04 -0500

Optimized for pipe fabrication, PipeWorx(TM) Welding System performs stick, TIG, MIG, and flux cored welding. Switching between processes is almost instantaneous, with no need to manually switch polarity, cables, or hoses, eliminating potential source of errors. Up to 4 programs can be stored for each process, and processes can be shared among different machines via memory card. Quick Set technology sets correct polarity and returns to last settings for that process.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Pipe & Tube Welders | Welding Systems | TIG Welders | Multiple Process Welders | MIG Welders | Flux Core Arc Welders (FCAW)

Spot Welder targets battery assembly applications.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:29:04 -0500

Available in 1,500 and 2,500 W power levels, SonoWeld® 1600 Digital Metal Spot Welder can weld up to 20 layers of foil and can store and recall up to 250 weld protocols. Unit creates durable bond without using heat, current, fluxes, or fillers. Instead, Wedge-Reed coupling system directs high-frequency ultrasonic energy to metals being welded. Energy disperses oxides and surface films between work pieces to create true metallurgical bond without melting materials.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Spot Welders | Ultrasonic Welders

Submerged Arc Welding System features outdoor rating.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:06 -0500

With 380-575 Vac, 50/60 Hz input voltage capability, Power Wave® AC/DC 1000® SD delivers 1,000 A at 100% duty cycle. Each welding arc may be driven by single machine or by number of machines connected in parallel. Digital inverter-based power source features software-driven Waveform Control Technology® for control of DC positive, DC negative, balanced AC, and variable AC submerged arc processes. Housed in protective, stainless steel case, system is IP23-rated for severe-duty outdoor use.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Submerged Arc Welders | Arc Welders

Gantry Machine offers multi-axis motion platform.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:37 -0500

Supplied fully assembled with controls, cabling, software, and enclosure, TechnoMod Models 30, 45, and 65 offer travel ranges of 650 x 300 x 275 mm, 650 x 450 x 275 mm, and 650 x 650 x 275 mm, respectively. Fourth or 5th rotary axis can be added to machine for complex operations. Available with or without electronics as well as sliding front door with safety interlock, machines have built-in industrial computer and swing arm console with monitor and keyboard.

This story is related to the following:
Robotics
Machinery and Machining Tools
Welding Equipment and Supplies

Search for suppliers of: Gantry Robots | Assembly Automation Systems | Automation Systems | Welding Automation Equipment | Automation Equipment

Robotic Cell has compact, dual fixed table design.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:46 -0500

For fabrication shops dealing with small- to medium-sized parts, eCell(TM) LR provides flexible automation layout that delivers consistent and predictable production. Power Wave® i400 welding power source and AutoDrive(TM) 4R90 welding wire drive are employed for MIG, synergic MIG and MIG pulse welding, or flux-cored arc welding. Supplied as pre-engineered system, cell has 80 x 50 in. footprint and takes advantage of reach/stroke ratio and axis speeds of Fanuc ARC Mate® 50iC/5L robot arm.

This story is related to the following:
Welding Equipment and Supplies
Robotics

Search for suppliers of: Welding Systems | Robotic Workcells | Robotic Cells

Welding Power Source features portable, multi-process design.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:45 -0500

Designed for welding wide variety of materials and applications, Power Wave® S350 features PowerConnect(TM) Technology, allowing users to connect automatically to input power ranging from 200-600 V, 50 or 60 Hz and single- or 3-phase with no manual reconnect. IP23-rated unit includes Tribid(TM) Power module, iARC(TM) digital controls for arc stability, and Ethernet connection. Production Monitoring(TM) software lets user track equipment usage, store weld data, and configure limits.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Automatic Welders | Arc Welders | Welding Power Supplies

Welding Guns deliver semi-automatic operation.

info@productnews.com (ThomasNet News) — Mon, 10 Aug 2009 08:33:45 -0500

Used for MIG, pulsed MIG, and flux-cored welding processes, Magnum® PRO 450/550 are rated for 100% duty cycle and designed/tested for extreme environment welding applications. Balanced, barrel-style handle provides comfortable grip and reduces fatigue, while industrial-grade construction with copper and aircraft-grade aluminum parts ensures optimal electrical contact and heat dissipation. Also, Copper Plus(TM) contact tips maximize diameter and tip volume by weight.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Guns

Power Pin suits Fronius® wire feeders.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:19 -0500

Suitable for robotic, automatic, or semi-automatic TOUGH GUN(TM) MIG guns, Model 214-41 can be used in place of actual Fronius® power pin for VR1500 wire feeders. Unit threads into all Tregakiss unicables except Euro, and can also be used with Motoman® unicables on EA/SSA series of robots. Power pin is designed for use with QUICK LOAD(TM) liners only.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding Accessories & Supplies Equipment | Welding Accessories & Supplies

Green Laser Welder microwelds conductive parts.

info@productnews.com (ThomasNet News) — Fri, 24 Jul 2009 08:30:15 -0500

Offering 2 energy- or time-share outputs, 5 W LW5AG utilizes 532 Nm wavelength in visible (green) spectrum, enabling precision microwelding of conductive materials like gold and copper alloys. Welder provides real time power feedback for ensuring stable pulse-to-pulse energy. Featuring single phase power, air cooled welder facilitates non-contact welding and enables quick set-up and integration into existing production line.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Laser Welders | Micro Welding Systems

Laser Welding System has fully enclosed atmospheric chamber.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:36:06 -0500

Enabling welding in inert gas environment, Model HP-115 is designed for welding oxygen sensitive or reactive materials, like titanium. It can be configured with variety of features such as antechambers, inert gas handling and purification systems, oxygen and moisture sensors, and part handling devices. Capable of 3D freeform fabrication, system suits applications including weld restoration on turbine engine components like blades, vanes, shrouds, seals, and BLISKS or IBRs.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Inert Gas Welders | Welding Systems | Laser Welders

Butane-Powered Microtorch meets CPSC safety requirements.

info@productnews.com (ThomasNet News) — Fri, 17 Jul 2009 08:32:30 -0500

Featuring self-igniting piezo electric ignition, compact Model MT-70 includes fuel adjustment wheel to provide 2,500°F pinpoint or broad blue torch flame. It incorporates trigger switch with pulldown lock, and slide-lock control for hands-free use. Self-contained, refillable butane fuel tank provides for up to 60 min of use on full charge. Torch has ergonomic handle to ensure non-slip grip, and can also be used as soldering iron or flameless heat tool using optional tips.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Soldering Torches | Butane Torches | Hand Torches | Heating Torches

TIG Torches offer 150 Adc and 115 Aac welding capabilities.

info@productnews.com (ThomasNet News) — Thu, 16 Jul 2009 08:29:55 -0500

Designed for torch control and welding on thin- to medium-gauge materials, WP-17 Series air-cooled TIG torches include 2 models, WP-17 and WP-17V. Series includes 5 different styles of torches, including standard, valved, and flex neck models. WP-17 Series torches are available in 12.5 and 25 ft, and one- or two-piece cable lengths. Fingertip gas valve in WP-17V model improves shielding gas control when used with power sources that do not have gas solenoid.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Welding & Cutting Torches

Aluminum Welding System offers one-knob synergic control.

info@productnews.com (ThomasNet News) — Wed, 15 Jul 2009 08:31:44 -0500

Designed for MIG and pulsed MIG aluminum applications, AlumaFeed Synergic System consists of AlumaPower 350 MPa synergic power supply providing 5-425 A/10-38 V, XR AlumaFeed wire feeder/control module, and XR-Aluma-Pro or XR-Pistol Grip gun. Profile Pulse(TM) pulsed MIG output creates stacked dime weld bead appearance without torch manipulation, while Hot Start(TM) function minimizes incomplete fusion or cold lap at beginning of weld.

This story is related to the following:
Welding Equipment and Supplies

Search for suppliers of: Arc Welders | MIG Welders