ThomasNet Industrial Newsroom -

Waste Compactors target food service and marine applications.

info@productnews.com (ThomasNet News) — Tue, 24 Nov 2009 08:33:54 -0500

Equipped with 18 x 28.5 in. chute type opening, Series K100 can compact waste into stainless steel containers or plastic bags, or be used as baler for recycling materials. Depending upon type of material being compacted, users can expect compaction ratios from 6 times to double that amount. Units operate from 120/220 V single phase power or 240-480/600 V for marine use. Made of AISI 304 SS, marine version has stainless steel washdown motor and all electrical wiring in waterproof compartment.

This story is related to the following:
Waste Handling Equipment
Chemical Processing and Waste Management
Packaging Products & Equipment

Search for suppliers of: Waste Handling Equipment | Refuse Handling Systems | Refuse Handling Equipment | Garbage, Refuse, Rubbish, Trash & Waste Compactors | Balers

Modular Waste Handling System includes self-contained units.

info@productnews.com (ThomasNet News) — Mon, 03 Aug 2009 08:32:27 -0500

Suitable for both rural and urban plants, self-contained waste handling units are developed based upon throughput of end user and can function as standalone piece of equipment when required. Applications include manufacturing and process industries, council recycling and waste handling, agricultural processes, mills, or any applications involving product reclamation. Supplied as turnkey recycling solution, system can handle throughput ranging from 1-30 ton/hr.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Waste Handling Equipment | Waste Handling Systems

Metal Chip Processing System features portable design.

info@productnews.com (ThomasNet News) — Mon, 20 Jul 2009 08:34:31 -0500

Designed for small to medium machining shops and as add-on for larger operations, modular MiniSystem(TM) can reclaim cutting oil and coolants. Unit is fully portable and can be contained in area as small as 4 x 11 x 8 ft. Continuous processing, diagonal shaft wringer comes with bar-end separator and exerts 700 G's of force to extract up to 98% of cutting fluids. Dry chips are produced at rates up to 1,000 lb/hr. Options include feed dumper system, shredder, and 10 micron filter.

This story is related to the following:
Chemical Processing and Waste Management
Waste Handling Equipment

Search for suppliers of: Metal Chip Oil Reclaiming Separators | Chip Processing Systems

Utility Trucks capture trim and scrap waste.

info@productnews.com (ThomasNet News) — Fri, 24 Apr 2009 08:38:50 -0500

Rotationally molded from 100% polyethylene, MOD 39 Series captures 24 cu-ft of cut, shredded, or continuously fed paper, plastic film, or other type of waste material. Trucks feature safety rolled top rim and tapered shape that permits nesting. When filled, units are rolled away, transferring material to baler for recycling or disposal. Available in 8 sizes ranging from 6-20 bushel capacity, trucks are suited for converting, printing, and packaging operations.

This story is related to the following:
Waste Handling Equipment
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Waste Handling Equipment | Waste Disposal Containers | Utility Carts | Plastic Trucks

Dumpster Mover pulls heavy containers to curb side.

info@productnews.com (ThomasNet News) — Tue, 25 Nov 2008 07:47:50 -0500

CartCaddy dumpster mover pulls heavy trash and recycling containers and dumpsters from underground parking lots to street level for curb side pick up. It is able to move trash bins over asphalt, through snow and ice, and in tight areas such as hallways, aisles, and doors, as well as in open spaces. Compact and ergonomic, system is battery powered with 36 V motor that is able to maneuver dumpsters from 500-10,000 lb.

This story is related to the following:
Waste Handling Equipment
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Waste Handling Equipment | Motor Driven Carts | Material Handling Carts

Hub Dicing Blades suit chip scale package applications.

info@productnews.com (ThomasNet News) — Wed, 17 Sep 2008 07:41:54 -0500

UniPlus blades are optimized for cut quality, blade life longevity, and productivity in various chip scale package (CSP) applications. Each blade is designed for specific package singulation application, including ceramic, BGA substrates, and QFN leadframes. Hard nickel bond permits optimized feed rates, and flexibility lets users tailor approach based on individual process and project requirements.

This story is related to the following:
Waste Handling Equipment
Machinery and Machining Tools

Search for suppliers of: Chip Processing Systems | Dicing Blades

Recycling Carts promote accurate sorting during collection.

info@productnews.com (ThomasNet News) — Fri, 02 May 2008 07:58:06 -0500

Developed to promote recycling in workplace, Sortasaurus Trux Collection Carts feature 3 individual compartments to permit plastic, glass, metals, paper, or different grades of same material to be separated at point of collection. Carts have 3 vinyl liners set within weather-resistant, powder-coated steel frame on combination wood and steel base with industrial strength casters. Available in 12- and 18-bushel capacities, carts offer choice of 6 standard and custom colors.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Recycling Separators

Recycling Station can separate 4 waste streams.

info@productnews.com (ThomasNet News) — Tue, 28 Aug 2007 07:43:21 -0500

Glutton® Recycling Station includes 4 removable 23 gal Slim Jim® containers and 2 Glutton® 56 gal containers, for total capacity of 92 gal. Lid frame fits over containers to create unified, cohesive station, while center hinge allows lid to be opened from either side and eliminates need to remove it during emptying, reducing worker strain and trip-and-fall hazards. Multilingual word labels along with highly visible iconic labels provide universal cues for end-users.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Waste Disposal Containers | Recycling Equipment | Refuse Handling Systems

Waste Handler Crawlers are designed for landfill applications.

info@productnews.com (ThomasNet News) — Tue, 26 Jun 2007 08:18:07 -0500

Models 950J and 1050J are designed to keep debris out of engine compartment by eliminating openings. Hydrostatic drive train, controlled by joystick, delivers precise maneuverability. With 247 net hp and 58,500 lb weight, Model 950J comes with semi-U blade with trash rack of 21.8 cu yd capacity. Model 1050J has 335 net hp, 81,000 lb weight, U-blade and semi-U blade with trash rack of 25.8 and 32.8 cu yd, respectively.

This story is related to the following:
Chemical Processing and Waste Management
Waste Handling Equipment

Search for suppliers of: Waste Machinery | Landfill Equipment & Supplies | Waste Handling Equipment

System collects and transfers waste liquids.

info@productnews.com (ThomasNet News) — Mon, 26 Feb 2007 07:30:34 -0500

Permanently mounted or used portably, Collection Center and Pump System consists of 7 gal PIG® Burpless® Waste Collection Center, PIG® Evacuation Pump Kit, and variety of accessories available separately. Burpless collection center can be connected to any drum or bulk collection container with 2 in. NPT bung opening. Suited for industries that collect large amounts of oils, coolants, and other non-hazardous fluids, system helps prevent injuries, drips, and spills.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Waste Handling Equipment

Search for suppliers of: Barrel & Drum Pumps | Waste Transfer Systems | Waste Handling Systems

Densifier readies plastic for reprocessing.

info@productnews.com (ThomasNet News) — Fri, 22 Dec 2006 08:55:36 -0500

Featuring built-in temperature sensor that prevents startup until optimum temperature has been reached, WastePAC Densifier(TM) automatically converts plastic film, foil, poly-coated paper, and other waste material into rigid bricks ranging in adjustable size from 4 in. to more than 8 ft long. Unit compresses both clean and post-consumer material with 40:1 compaction ratio, transforming up to 333 cu-ft of material into single brick suitable for transport over road or overseas for reprocessing.

This story is related to the following:
Chemical Processing and Waste Management
Waste Handling Equipment

Search for suppliers of: Densifiers | Waste Handling Equipment

Mobile Waste Container facilitates collection, segregation.

info@productnews.com (ThomasNet News) — Mon, 11 Dec 2006 07:59:08 -0500

Designed to optimize waste collection and sortation efficiency, Mega BRUTE® features 120 gal capacity to reduce number of required trips made throughout facility. Its 12 in. wheels and 5 in. non-marking locking casters, configured in diamond pattern, promote turning, direction changes, and mobility. Unit can pivot 360° on its own axis to maneuver through tight spaces. To facilitate filled 55 gal bag removal, 2 outward-opening doors at rear of unit are provided.

This story is related to the following:
Cleaning Products and Equipment
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Waste Handling Equipment

Search for suppliers of: Waste Handling Equipment | Janitors' Trucks | Refuse Handling Equipment | Material Handling Equipment | Janitorial Equipment & Supplies

Swarf Handling System granulates and removes lens waste.

info@productnews.com (ThomasNet News) — Wed, 15 Nov 2006 07:45:44 -0500

PAC inline swarf handling system automatically captures, granulates, and removes waste material generated during manufacture, surfacing, finishing, and edging of lens blanks. It then deposits waste into bag or bin for disposal or recycling. Delivering clog-free performance, system features 180° granulation screen that reduces swarf size to 1/8 in. or less as needed. It has sealed bearing design and may be fitted with built-in dust collection system.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Waste Handling Systems | Swarf Processing Systems

Screenings Conditioner installs in tight plant locations.

info@productnews.com (ThomasNet News) — Fri, 11 Aug 2006 08:10:20 -0500

Featuring stainless steel tank enclosure and hopper, SPIRALIFT SC8500 takes screenings discharged from bar screen and washes, grinds, compacts, de-waters, and discharges them into container for disposal. It utilizes 2 hp auger as well as 5 hp grinder with 8 x 20 in. opening and cutter cartridge technology, which replaces individual cutters and spacers with one-piece cartridges. PLC-based control system monitors and integrates entire system.

This story is related to the following:
Chemical Processing and Waste Management
Portable Tools
Waste Handling Equipment

Search for suppliers of: Screening Machinery | Waste Handling Equipment | Grinders

Waste Containers offer various customization possibilities.

info@productnews.com (ThomasNet News) — Wed, 19 Jul 2006 08:06:23 -0500

Featuring high-luster paint finish and rust-resistant ABS resin base and top, Infinity(TM) Decorative Waste Containers are available in over 150 colors with custom logo capabilities. Infinity Custom Design Program lets customers personalize containers with logo or message to reinforce brand awareness and corporate identity. Custom graphics are applied via vinyl labels or screen printing options on front, back, and side panels.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Waste Handling Equipment | Waste Containers

Trainable Dolly helps sort and collect waste.

info@productnews.com (ThomasNet News) — Tue, 18 Jul 2006 08:06:15 -0500

Facilitating collection, sortation, and transportation of waste and recycling, BRUTE® Trainable Dolly features hitch-and-ball design that enables maintenance professionals to connect and transport up to three 55-gal BRUTE® containers at one time. Tilt Stabilizer provides safe method of removing full liners of heavy waste, while Pull Handle Accessory optimizes overall control and leverage when transporting multiple containers. Quiet Casters minimize workplace disruption.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Waste Handling Equipment

Search for suppliers of: Waste Handling Equipment | Recycling Equipment | Material Handling Equipment | Drum Dollies | Transport Dollies

Electrostatic Separators reclaim metal/plastic material.

info@productnews.com (ThomasNet News) — Mon, 10 Jul 2006 08:08:31 -0500

Using entirely dry process, electrostatic separation equipment can remove, clean, separate, or recover plastics or metal from nonmetal mixture. EKS Series is capable of segregating 2 recyclable plastics simultaneously and is suited for sorting plastic production waste, separating unwanted contaminants in plastics, or producing new product from raw material. Fully automatic KWS Series can separate very fine metal particles from recycling materials.

This story is related to the following:
Green & Clean
Machinery and Machining Tools
Materials and Material Processing
Waste Handling Equipment

Search for suppliers of: Separating Machinery | Recycling Separators | Electrostatic Separators

Waste Handlers are built to survive hostile environments.

info@productnews.com (ThomasNet News) — Tue, 20 Dec 2005 07:06:20 -0500

With all vulnerable machine components guarded to protect against trash infiltration and impact damage, models 544J and 624J handle up to 5 and 6 yd³ waste buckets, respectively. Both withstand airborne debris, are designed to promote operator visibility, and feature Quad-Cool(TM) cooling system. Additional features include hydraulic belly pans, front and rear hydraulic differential option, and electronically controlled, 160 or 180 hp PowerTech 6068H engine.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Waste Handling Equipment
Construction Equipment and Supplies

Search for suppliers of: Waste Handling Equipment | Front End Loaders | Construction Equipment

Waste Handling Systems have venturi-based design.

info@productnews.com (ThomasNet News) — Thu, 13 Oct 2005 09:31:37 -0500

Available in 8 versions, PAC Series automated trim, scrap, and waste handling systems capture continuous streams of waste materials at slitter, press, or die cutter and smoothly transport them to collector bin, container, or baler up to 100 ft away for recycling or disposal. Systems handle wide range of production speeds and feature venturi fan, dual material pick up nozzles, wye, control panel, and short or long run flex hose.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Waste Handling Systems

Grinder protects small pump stations and influent channels.

info@productnews.com (ThomasNet News) — Wed, 18 May 2005 08:02:14 -0500

Channel Monster® CMD1205-AD employs 5 in. diameter drum to direct solids into cutting chamber, allowing installation in channels as narrow as 14 in. Drums are available with either ¼ in. coil spacing or ¼ in. perforations. Grinder operates on 3 hp motor with 29:1 reducer and is available with optional 5 hp motor for difficult grinding installations. Applications include wet wells, industrial waste channels, prison sewage systems, and influent channels.

This story is related to the following:
Waste Handling Equipment

Search for suppliers of: Sewage Treatment Grinders | Waste Handling Equipment