ThomasNet Industrial Newsroom -

Electronic Time Delay Device meets NFPA requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Apr 2008 07:44:17 -0500

Providing field adjustable time delay of 1-60 sec, ETR-Timer can also be adjusted at factory to fixed 30 sec delay. Powered from 12-24 Vdc supply requiring 0.05 A, it can be triggered from either NO or NC momentary dry contact or by switching trigger input to power source ground. Unit meets code requirement for true fail-safe lock timer, and protects timing circuit against spikes and surges produced by strikes and solenoids that may be operated by timer.

This story is related to the following:
Timers and Clocks
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Controls and Controllers

Search for suppliers of: Electronic Timers | Time Delay Locks | Access Control Systems

Industrial Pushbutton Timer is adjustable.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Mar 2008 07:36:29 -0500

Available with time range of 1 sec to 79 min, timer box is activated by push button that counts down from user-settable time, while piezo-buzzer and flashing LED alerts users when time has elapsed. It also includes second settable time with relay output to control rinse tanks. Offered in NEMA 4X enclosure, battery-powered unit features digital circuitry, rotary switches, and plug in option, and is suited for controlling chemical tanks, batch ovens, and solenoids.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Industrial Timers | Countdown Timers

Large Digit Displays can be viewed from up to 160 ft away.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:37 -0500

Available for analog, pulse, and serial data signals, G04 Series Large Digit Meters, Counters, Timers and Serial Input Displays come with oversize 4.0 in. digits for long distance viewing in any plant or outdoor environment. Number of digits is 5 for analog or rate signals for readings from -19999 to 99999, and up to 7 for totalizing or for use as serial input remote display with readings from -1999999 to 9999999. Elapsed timer and time-of-day clock configurations are also available.

This story is related to the following:
Timers and Clocks
Test and Measuring Instruments
Display and Presentation Equipment

Search for suppliers of: Digital Timers | Electronic Displays | Digital Meters

Timer Controller has universal power supply.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Oct 2007 07:35:42 -0500

Available in 4, 6, 10, 22, or 32 channels with field-selectable last channel output, Series DCT600 Dust Collector Timer Controller is suited for dust collection as well as pneumatic conveying control systems. Relying on one timer board for on demand or continuous cleaning applications, it accepts 85-270 Vac power. Circuitry synchronizes on-time pulse to power line to achieve pulse stability of ±1 msec.

This story is related to the following:
Controls and Controllers
Timers and Clocks

Search for suppliers of: Time Control Instruments | Dust Collector Timers

Timer offers programmable events for each day and year.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jul 2007 08:04:45 -0500

Measuring 72 x 72 mm, Model LE7M-2 provides 48 independent programs and 3 output functions for weekly mode, as well as 24 independent programs and 2 output functions for yearly mode. Operating from 100-240 Vac supply, unit includes LCD display and 2 SPDT relay outputs. Other functions include up to 12 holiday/non-operation day settings, manual override of outputs, and season and daylight saving settings. Unit can be panel, surface, or DIN rail mounted.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Programmable Timers

Sprinkler Timer has user-friendly interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Apr 2007 08:03:27 -0500

Featuring electronic interface, Simple To Set Irrigation Timer allows user to tailor each watering zone according to watering needs. One-touch water saving features include Seasonal Adjust, which changes water duration and frequency, and Rain Delay for days that do not require sprinkler. Timer also includes memory function, surge protection, and troubleshooting feature that detects electrical short, displays error message, and suspends watering of zone until problem is fixed.

This story is related to the following:
Timers and Clocks
Controls and Controllers

Search for suppliers of: Programmable Timers | Sprinkler Controls | Electronic Timers

Counter/Timer Modules provide USB connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 19 Feb 2007 07:37:25 -0500

Based on 9513 Series chip, 5-channel, 16-bit Model USB-4301 features one 8-bit dedicated input port and one 8-bit dedicated output port. Model USB-4303 is based on two 9513 chips and provides 10 channels. Packaged in impact-resistant ABS plastic enclosure measuring 5 x 3.5 x 0.4 in., both modules have 2 rows of 24 clearly labeled screw terminals for wiring in lab or in field.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Counting Timers

Count-Up Controllers allow unattended equipment operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Feb 2007 06:59:30 -0500

Programmable in .01-99.99 sec, 1-9,999 min, or 1-9,999 hr intervals, Model 1 Walkaway(TM) Turn-off Controller counts up and turns any piece of equipment off at end of set time period. Model 2 Walkaway Repeat Turn-on/Turn-off Controller, programmable for 1-99 sec/min/hr intervals, counts up and turns any piece of equipment on for programmed time and off for different programmed time. Repeat feature continues cycling until manually stopped. Both models are NIST Traceable®.

This story is related to the following:
Timers and Clocks
Controls and Controllers

Search for suppliers of: Digital Timers | Programmable Controllers | Process Controllers | Industrial Timers

Stopwatch Timer features resolution to 0.2 µs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Nov 2006 07:45:33 -0500

Timing events from 1 µs to 999,999 hr, Laureate Model FRS, 6-digit panel-mount timer displays event times in ms, sec, min, or hr. Accumulated time from multiple events can be tracked and displayed, automatically stored in non-volatile EEPROM even in absence of power. Featuring dual-channel signal conditioner accepting signals from 12 mV to 250 Vac, timer has 2 modes allowing start and stop pulses to be measured on same or different channels.

This story is related to the following:
Timers and Clocks
Test and Measuring Instruments

Search for suppliers of: Industrial Timers

NIST Traceable Timer provides 0.01% accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Nov 2006 07:41:15 -0500

Measuring 2½ x 2 x 7/8 in., Traceable® Nano(TM) Timer displays countdown alarm timer/stopwatch time, and time of day with press of button. Unit can count down or up to 23 hr, 59 min, 59 sec on 2 timing channels. For repetitive tests, 2-channel memory automatically returns display to original programmed time. Timer features high-decibel alarm that sounds for 1 min and 3/8 in. high digits that may be read from 10 ft. It comes with battery, clip, stand, and magnet on back.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Digital Timers | Countdown Timers

Timers have no buttons, batteries, or confusing settings.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Sep 2006 07:40:35 -0500

Housed in chemical-resistant, ABS plastic case, SX-Timer(TM) and Quick-Timer(TM) are adjustable from 0-60 min in 1 min increments. Turning pointer to desired countdown setting automatically winds timers. Indicating pointer always shows exact time remaining, and 5-sec bell rings at zero. Measuring 2½ x 1 in., Quick-Timer is blue and white with magnet on back. SX-Timer measures 2¼ x 1 in. and is translucent blue and white. Both are supplied with lanyard and keychain.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Countdown Timers

USB Digital Module provides 15 independent counter/timers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Aug 2006 08:09:25 -0500

Measuring 3.550 x 3.775 in., Model USB-CTR-15 features 5 fully undedicated 82C54 counter/timer chips, each with 3 independent, software-programmable, 16-bit counters. True USB 2.0 device offers plug-and-play operation, enabling users to add portable counter/timer capabilities to any PC or embedded system with USB port. Unit is suited for event counting, frequency measurements, position measurement, pulse counting, PWM, and pulse generation.

This story is related to the following:
Timers and Clocks
Test and Measuring Instruments

Search for suppliers of: Counting Timers | Digital I/O Modules

Programmable Timer features panel-mount, IP65 construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Apr 2006 08:15:19 -0500

Model PTC-13 offers 11 operating modes applied to 2 timed output relay contacts. When only one timer is being used, other output acts as set of instantaneous changeover contacts. Single model, packaged in 1/16 DIN, IP65-rated housing, provides timing from 0.1 sec to 100 hr. In addition to 4 timing ranges and selectable up/down timing, unit features dual LED displays, external hold and reset, password security code, and programmable reset function.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Programmable Timers

Delay-on-Dropout Timer suits automotive applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Dec 2005 07:04:46 -0500

Hockey-puck style Series ADOD operates auxiliary equipment such as radios, computers, and lamps for specified time after engine has been turned off, yet prevents discharge of battery should operator forget to manually shut down equipment. Unit features solid state digital circuitry, 40 A SPST NO relay contact, 11-16 Vdc vehicular voltage range, 45 min fixed timing cycle, and temperature range of -40 to +70°C.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Timers and Clocks

Search for suppliers of: Delay Relay Timers | Automotive Timers

Flushing Timer helps keep humidifier components clean.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Dec 2005 07:08:25 -0500

Humidifier Automatic Flushing Timer, Model S-HAFT, is used to flush accumulated mineral deposits from central-system steam- and reservoir-type humidifiers. Unit may be programmed to perform 10-, 20-, or 30-sec flushes at 2-hr intervals, using total of 1.5, 3.0, or 4.5 gal of water per day, respectively. Painted steel body measures 2 13/16 x 2 13/16 x 2 13/16 in., and installation package includes 15 ft of 3/8 in. ID tubing as well as mounting hardware.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Programmable Timers

Timers and Counters offer programmable operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 19 Sep 2005 07:27:58 -0500

Multifunctional EZM-4450 (1/16 DIN), EZM-7750 (1/8 DIN), EZM-4950 (1/8 DIN), and EZM-9950 (¼ DIN) can count up on 1 or 2 channels or subtract one from the other. Equipped with two 6-digit displays and on-board sensor power supply, products accept NPN, PNP, encoder, or dry contact input signals; have 2 set points, and communicate via RS-232 serial communication (MODBUS) or optional RS-485. Time range is programmable from 0.01 sec to 999.99 hr.

This story is related to the following:
Test and Measuring Instruments
Timers and Clocks

Search for suppliers of: Electronic Timers | Electronic Counters

Portable Lab Timer is traceable to NIST standards.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Aug 2005 07:56:52 -0500

Traceable® Lab Timer allows programming of 3 different activities from 9 hr, 59 min, 59 sec to 1 sec with 0.001% accuracy. Each channel has distinct electronic alarm and display indicator, and alarm is turned off manually or silenced automatically after 1 min. Measuring 3 x 3 x 1 3/8 in., 4 oz timer has chemical-resistant ABS case and 4 digit LCD display. Applications include QA/QC times tests, pharmaceutical/food testing, and water analysis timing.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Laboratory Timers

Delay-On-Make Timers feature solid-state circuitry.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Jun 2005 08:11:35 -0500

Housed in hockey puck style package, Series ST1D utilizes CMOS digital circuitry and 1 form A adjustable switching device by means of 10-position DIP switch encoded in binary format. Continuous load current of 3 A is standard. Timing ranges include .2-102.3 sec in increments of 0.1 sec and 1-1,023 sec in 1 sec increments, both with timing accuracy of ±5% plus ½ increment. Series ST1D is available in 12, 24, 48, 110, and 120 V ac or dc voltages.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Timers and Clocks

Search for suppliers of: Delay Relay Timers | Digital Timers

Electronic Timer is traceable to NIST standards.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Oct 2004 07:40:46 -0500

Used to help catch all test results, Traceable® Big-Foot Timer signals drying and incubating times. It allows simultaneous programming of 3 activities from 99 hr, 59 min, and 59 sec to 1 sec on portable countdown alarm timer. Resolution is 1 sec, and accuracy is 0.01%. Each of 3 channels has distinct electronic alarm and display indicator when zero is reached. Measuring 4 x 4.5 x .75 in., product has 1 in. high LCD digits that may be read from 30 ft.

This story is related to the following:
Timers and Clocks

Search for suppliers of: Electronic Timers

Batch Ovens include digital process timer.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Oct 2004 07:40:28 -0500

Adjustable from 1 min to 99 hr and 59 min, Watch Dog Oven Management System displays time-in and time-out, along with time remaining and present date and time. It keeps track of elapsed time from date of shipment and accumulates time when oven is in operation. LCD indicates service intervals at 500 hr increments, prompting maintenance personnel to perform recommended service. Unit will dial up to 3 stored telephone or pager numbers to notify of malfunction.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Timers and Clocks

Search for suppliers of: Process Timers