ThomasNet Industrial Newsroom -

Walk-In Oven accommodates overhead crane loading.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:04 -0500

In addition to air-operated crane access door, No. 1000 gas-fired, 500ºF walk-in oven measures 81 in. wide x 14 ft deep x 12 ft high and has 600,000 BTU modulating natural gas burner. Oven's 17,500 cfm, 15 hp recirculating blower provides combination horizontal/vertical airflow to load, and all appropriate safety equipment required by IRI, FM, and NFPA Standard 86 is included. Construction includes 4 in. insulated walls throughout as well as aluminized steel interior and exterior.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Gas Fired Ovens

Vacuum Drying Oven meets customer's unique requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:23 -0500

Offering temperature uniformity to ±3% of user set point, 5 cu-ft Model SVO-501 features digital independent over-temperature control and protection as well as built-in serial communication outputs for temperature and vacuum. Push button execution and smart relay controls and alarms notify operator if required specifications are not being met. Fit with optional touch screen data logger, automated oven delivers real-time temperature, vacuum, and independent thermocouple data.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Ovens | Drying Ovens

Lead-Free Batch Oven targets low-volume users.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2008 07:38:58 -0500

Using mix of quartz infrared and hot air convection, Model T200A is capable of attaining lead-free temperatures to 300°C and offers ΔT performance envelope of only ±1°C across 14 x 9 in. processing area. Oven will precisely generate and store 20-40 sequential time and temperature settings. In addition to soldering microchips and other SM devices, oven can be used for curing and drying applications.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Batch Ovens | Reflow Ovens

Walk-In Batch Oven features heavy duty construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Mar 2008 07:41:57 -0500

With ability to heat, dry, and/or cure liquid or powder coatings on small, medium, and large 3D products, Heavy Duty Gas Fired or Electrically Heated Batch Oven systems feature air recirculation and exhaust system as well as insulated enclosure. They have digital timer, auto-shutdown, real-time clock, maintenance prompts/auto dialer, and hour meter. Bi-parting doors feature 12 ga exterior with supports, ball bearing hinges, and FM approved safety latches.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: Coating Ovens | Combination Ovens | Convection Ovens | Heat Treating Ovens | Walk-In Ovens | Electric Ovens | Gas Fired Ovens

Conveyorized IR Oven incorporates air drying/curing systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Mar 2008 07:41:56 -0500

Designed to dry or cure liquid and powder coatings on wide range of products, Horizontal Conveyorized Infrared with Air Drying System features electric infrared heaters with integral air plenums and controls; air supply and exhaust system; and insulated oven enclosure. System can be used as stand-alone complete horizontal conveyorized drying/curing system or in conjunction with coating application equipment and incoming/outgoing conveyors.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Infrared Ovens | Electric Ovens | Conveyor Ovens | Coating Ovens

Conveyor Oven performs stress relief on locking wheel hubs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Mar 2008 07:35:34 -0500

With production rate of 600 lb of parts/hr, Electrically Heated Conveyor oven is designed to heat parts from 70-1,100°F, and features 1,250°F maximum operating temperature. Constructed with 10 in. thick insulation, 3/16 in. thick plate steel exterior, and 16 ga 304 SS interior, it has 30 in. wide, 9 ft long, and 1 ft high heating chamber. Heating system is rated for 180 kW of heat input, while recirculation blower is rated for 18,000 cfm at 15 hp.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: Conveyor Ovens | Electric Ovens | Stress Relieving Ovens

Gas-Fired Conveyor Oven preheats tubes for oil industry.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Feb 2008 07:51:05 -0500

Along with 12 ft x 47 ft x 9 in. chamber rated to 500ºF max, bottom-flow conveyor oven features chain style conveyor with 10 strands of carbon steel chain spaced across width on 60 in. centers. Heating system features Eclipse 320 AH burner rated at 3,000,000 BTU/hr, and Allen-Bradley Powerflex VFD provides conveyor speed adjustability from 1.5-9 ipm. Oven is constructed with 4 in. thick tongue and groove panel assemblies, with interior and ductwork of aluminized steel.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Gas Fired Ovens | Conveyor Ovens

Lead-Free Reflow System delivers large-oven capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jan 2008 07:07:43 -0500

Forced hot air Pb-free CR reflow system, CR6000, is computer-controlled, measures 12.5 ft long model, and has 6 individually managed upper and lower heat zones. Designed to meet temperature and process control requirements of lead-free processes, system's large-oven capabilities include DT of ±2ºC edge-to-edge heating conformity integrated with 3-channel profiler and motor-adjustable 17.7 in. pin conveyor over 22.4 in. stainless steel mesh belt.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Reflow Ovens

Walk-In Oven features 500°F rating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Dec 2007 07:27:17 -0500

Offering workspace dimensions of 84 x 102 x 78 in., electrically heated No. 808 utilizes 420 kW Incoloy sheathed tubular elements and 17,500 cfm, 15 hp recirculating blower motor that provides combination airflow to workload. Oven includes 4 in. thick insulated walls throughout, two 30 x 24 x 6 in. stainless steel HEPA filters for exhaust air, and twelve 24 x 24 x 6 in. stainless steel 65% ASHRAE recirculating filters in air return ductwork.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Electric Ovens

Vacuum Drying Ovens handle flammable/non-flammable solvents.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Dec 2007 07:45:16 -0500

Providing safe drying through homogenous temperature distribution, Series VD for non-flammable solvents features expansion racks and individually programmable controller. VDL series is suited for drying flammable, organic solvents and includes interior chamber designed in accordance with ATEX Directive for Zone 2 while VDL series EX-Zone 2 is for operation in explosion hazard areas. Ovens provide drying with no residues, no danger of incrustation, and no oxidation.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Ovens | Drying Ovens

Gas-Fired Conveyor Oven dries moisture off aluminum coils.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Nov 2007 07:40:53 -0500

Built with 20 ft 4 in. x 2 ft 6 in. x 3 ft 6 in. work chamber, 300ºF oven performs 51 sec blow-off, 9 min drying at 250°F, and 1.8 min cool-down. Prior to entering oven, aluminum replacement coils are leak tested by placing coils in water bath and pressurized with air. Water load processing capability is 180 lb/hr, and coils are processed through drying system at 60 units/hr. Along with 4,000 fpm vertical angled supply nozzles, oven features 10,000 fpm blow-off nozzles.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Gas Fired Ovens | Conveyor Ovens

Reflow Oven is contained in 10 ft long unit.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:43 -0500

Computer-controlled CR 5000F features upper and lower zones, each maintained to within ±1ºC. It includes 3 thermocouple inputs as well as combination 22.4 in. SS mesh belt and pin-type conveyor with motor adjustable width from 1.97-17.7 in. Running on Microsoft® software, lead-free oven is also available in 6-, 8-, and 10-zone models to meet full range of production requirements.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Reflow Ovens

Sensor System monitors reflow oven performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Oct 2007 07:47:09 -0500

Designed to facilitate profiling process, Surveyor consists of fixed sensors that eliminate variables associated with thermocouple attachment, adjustable frame that rides on oven's rail or mesh belt, and software that automatically stores profiles for analysis. Using sensors, Surveyor can identify out-of-tolerance conditions before they become problematic.

This story is related to the following:
Software
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electronic Design Automation (EDA) Software | Oven Control Systems | Data Analysis Software

Reflow Oven suits mid-volume PCB assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Sep 2007 07:45:52 -0500

Equipped with 10 reinforced PID temperature controllers in each of 5 upper and lower chambers, Model R-500 precisely profiles critical solder paste reflow parameters. Three thermocouple inputs are provided for real-time monitoring of component and PCB temperatures. Computer-controlled oven is available with 16 in. stainless steel mesh belt or combination mesh belt and stainless steel adjustable edge pin conveyor for double-sided boards.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Reflow Ovens | Soldering Ovens

High Vacuum Oven addresses laboratory and industrial needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:08:27 -0500

Providing capacity of 9 cu-ft, SVO-9 TURBO Vacuum Oven handles high vacuum levels in 1 x 10<sup>-6</sup> range and temperatures up to 220°C. Smart Relay Control automates vacuum valves, as well as backfill, purging, and vent sequences. Temperature is controlled via Watlow programmable ramp and soak controller. Both roughing and turbo vacuum pumps are integrated, and are appropriately sized for application.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Ovens

Electric Walk-In Oven is rated to 500° F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Aug 2007 07:54:44 -0500

Offering 54 x 72 x 72 in. workspace, No. 825 is equipped with 30 kW power installed in Incoloy sheathed tubular heating elements, and 6,000 cfm recirculating blower that delivers horizontal airflow across workload. Unit includes 4 in. thick insulated walls, 2 in. insulated floor with truck wheel guide tracks, aluminized steel exterior, and Type 304 2B stainless steel interior. For safety, oven features digital programming temperature controller and manual reset excess temperature controller.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Electric Ovens

Electric IR Boost Oven utilizes fast-response heaters.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Jul 2007 07:46:04 -0500

Fast Response Electric Infrared Boost Oven System lets users boost temperatures of liquid or powder coated on small, medium, and large 3D products prior to entrance to hot air/convection oven. Equipped with electric IR heaters and controls, modular design allows for addition of more heated height and/or air recirculation system. System can be used as stand-alone complete cure oven or as boost system in conjunction with existing hot air/convection oven.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: Infrared Ovens | Heat Treating Ovens | Electric Ovens | Curing Ovens

Conveyor Oven tempers transmission components at 300°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 May 2007 07:48:26 -0500

Electrically heated, 2-zone, top flow conveyor oven features 34 ft x 10 ft 4 in. x 2 ft chamber rated for 700°F max. Rated for 10,000 lb/hr, its slat type conveyor has 4 in. wide x ½ in. thick carbon steel slats and 9 strands of 6 in. pitch conveyor chain to carry load. In addition to integral conveyor monitoring system that promotes safe operation, oven comes equipped with strip chart recorder, push-pull style cool down system, and PLC with touch screen.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Conveyor Ovens | Tempering Ovens

Electric Walk-In Batch Oven reaches 500°F max temperature.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 May 2007 07:48:14 -0500

Along with workspace dimensions of 48 x 96 x 72 in., No. 993 has 4 in. insulated walls throughout, aluminized steel exterior and interior, and 2 in. insulated floor with built-in truck wheel guide tracks. There are 45 kW installed in Incoloy sheathed tubular elements to heat oven, while 6,000 cfm, 5 hp recirculating blower provides horizontal airflow across workload. Additional features include 10 in. dia circular chart recorder and 30 hr oven shutdown timer.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Electric Ovens | Batch Ovens

Walk-in Oven is used for heat-treating steel parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Apr 2007 07:47:18 -0500

No. 835 electrically-heated walk-in oven features maximum temperature of 1,200°F provided by 120 kW power, installed in Incoloy-sheathed tubular heating elements. With aluminized steel exterior, 16 ga SS interior, 10 in. thick insulated walls, and 48 x 72 x 72 in. workspace, oven includes 10,000 cfm, 7½ hp recirculating blower. Safety and control features include 325 cfm powered forced exhauster, digital indicating temperature controller, and airflow safety switch.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Electric Ovens