ThomasNet News� -

Monitoring Software enhances heat exchanger performance.

info@productnews.com (ThomasNet News�) — Tue, 02 Apr 2013 08:29:53 -0400

As pre-engineered, integrated solution, Heat Exchanger Monitoring Solution embeds process and exchanger best practices into software using wired and wireless instrument applications for automated, 24/7 monitoring. Maintenance personnel can schedule optimal time to clean to sustain optimal heat transfer, helping facilities reduce energy and capacity loss due to fouling by up to 10%. Also, additional emissions from heater operation are avoided due to improved heat recovery in process.

This story is related to the following:
Software
Services
Green & Clean
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Sensors, Monitors and Transducers
Health, Medical and Dental Supplies and Equipment
Safety and Security Equipment

Search for suppliers of: Process Optimization Software | Process Control Software | Maintenance Management Software | Computer Maintenance Management Systems (CMMS) Software | Heat Exchanger Field Service | Heat Exchanger Tube Leak Detectors | Heat Exchanger Testing Services | Heat Exchanger Maintenance Equipment | Heat Stress Monitors

Custom Passive Heat Sinks meeting MPU cooling challenges.

info@productnews.com (ThomasNet News�) — Mon, 10 Dec 2012 08:30:55 -0400

Air-cooled heat sinks come in 4 varieties designed for optimal airside heat transfer performance. Design integrates Therma-Base Vapor Chamber technology within 3D thermal solution, with vapor flow spreading heat both laterally in base and into planar appendage heat pipe blades. Further enhancing thermal performance, high-density fins are attached to planar blades. Products are available for insertion into 4 chassis cooling formats, from 3U–6U, and handle heat loads from 250–2,000 W.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Custom Designed Heat Sinks

Liquid to Air Heat Exchangers offer capacities from 500-5,000 W.

info@productnews.com (ThomasNet News�) — Thu, 18 Oct 2012 08:29:31 -0400

Featuring self-contained design, WL Series removes heat from densely packed electronic environments that are not conducive to conventional heat sink fans. Units circulate water or water with glycol and run on AC voltage. Suited for medical and industrial markets, heat exchangers can maintain peak performance of high powered X-ray scanning systems by keeping X-ray generator and tube cool, and can extend life of machine tools used in CNC machining for fabricating metals.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Electronics Heat Exchangers | Water Cooled Heat Exchangers

Heat Exchanger Tubing withstands severe environments.

info@productnews.com (ThomasNet News�) — Fri, 24 Aug 2012 08:30:43 -0400

With non-stick characteristics, blister prevention, and resistance to corrosion and fouling, Q-Series Fluoropolymer Tubing extends heat exchanger service life. SLIMLINE Coil heat exchangers constructed from Q-series fluoropolymer resin handle many steam heating applications without de-superheating. With optimal thermal efficiency, Q-Series SUPERCOILS are suited for most metal finishing operations, particularly those involving electroless nickel and copper plating.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: PARKER / AUTOCLAVE ENGINEERS FCD - mobile banner
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Fluoropolymer Tubing | Heat Exchanger Tubing

Heat Recovery Systems reclaim energy from boiler blow down.

info@productnews.com (ThomasNet News�) — Fri, 27 Jul 2012 08:30:37 -0400

Provided completely packaged, ready for use, and requiring only connection to services, Heat Recovery Systems use flash tank to separate flash steam from condensate collected from blowdown. Condensate runs through float and thermostatic trap and heat exchanger to recover energy and cool condensate before it is piped to drain or returned to boiler. Optional vent condenser further maximizes amount of energy that could potentially be recovered.

This story is related to the following:
Controls and Controllers
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Boiler Blowdown Heat Recovery Systems | Waste Heat Recovery Systems | Heat Recovery Systems

Adaptable Heatsinks accommodate TO-264 devices.

info@productnews.com (ThomasNet News�) — Mon, 14 May 2012 08:33:19 -0400

C-series heatsinks feature camming clips that eliminate need for mounting holes and screws and provide same amount of force after repeated use. They are now offered in 30, 58, and 85 mm for TO-264 packages. Series is also offered in 25, 50, and 75 mm lengths for TO-220 and TO-247 devices, and TO-126 heatsinks are offred in 25 mm for single clip and 40 mm for 2 clips. Custom lengths and clip quantities are available.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Computer Hardware and Peripherals

Search for suppliers of: Heatsink Assemblies | Heat Sink Assemblies

Waste-Steam Recovery System is designed for retorts.

info@productnews.com (ThomasNet News�) — Wed, 18 Jan 2012 08:33:33 -0400

Allpax waste-steam recovery system reduces energy expenditure and water consumption to address overall facility sustainability. In new installations or as retrofit, system captures come-up vent-open waste steam in vented tank where steam condensates into hot (200°F) water that can be used to supplement hot water demands or run through heat exchangers for other plant processes. Vented collection tank is pressure neutral, and heat recovery system with pressure sensors is PLC controlled.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
HVAC
Green & Clean

Search for suppliers of: Heat Recovery Systems | Energy Recovery Systems | Steam-to-Water Converters

Liquid Cooling Systems suit densely packed electronic environments.

info@productnews.com (ThomasNet News�) — Thu, 08 Dec 2011 08:32:12 -0400

Designed to circulate either water, water-glycol (anti-freeze), or transformer oil, self-contained Liquid Cooling Systems (LCS) remove heat from densely packed electronic environments by recirculating coolant to predefined temperature set point. Liquid heat exchanger systems cool to ambient, while recirculating chillers cool to temperatures below ambient. Standard heat transfer mechanisms are either liquid-to-air or liquid-to-liquid configurations.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Electronic Component Cooling Systems | Cooling Systems | Electronics Heat Exchangers | Recirculating Chillers

Heat Sinks suit high power density applications.

info@productnews.com (ThomasNet News�) — Mon, 17 Oct 2011 08:31:08 -0400

Measuring 2.2 in. across x 1.71 in. tall, MV/MA 302 Series uses 2 internal spring clips for mounting up to four TO-247 or TO-264 devices, eliminating need for mounting holes and screws. Units are constructed of aluminum alloy 6063-T5 or equivalent with either degreased or black anodized finish. Four models are available with thermal resistance of 6.0, 5.2, 3.6, and 3.0°C/W.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Computer Hardware and Peripherals

Search for suppliers of: Printed Circuit Board (PCB) Heat Sinks

Air-Cooled Heat Sink has credit card-sized design.

info@productnews.com (ThomasNet News�) — Wed, 11 May 2011 08:34:52 -0400

Developed to fit inside notebooks, monitors, and tablets, ThinSink(TM) cools integrated circuits, semiconductors, LEDs, and other microelectronic heat generating devices. Using 40 mm diameter fan spinning at 6,000 rpm, heat sink consumes 0.031 W of electricity and provides thermal performance of 2.73°C/W. Thin, smooth fan surface eliminates pulsating sound and vibration caused by traditional fan blades. At 6,000 rpm, ThinSink has sound output less than 34 dBA.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Computer Hardware and Peripherals

Search for suppliers of: Low Profile Heat Sinks | Printed Circuit Board (PCB) Heat Sinks

Brazed Plate Heat Exchangers feature double-wall construction.

info@productnews.com (ThomasNet News�) — Wed, 23 Mar 2011 08:32:26 -0400

Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450°F. Double-wall heat exchangers are suited for residential hydronic heating applications such as radiant, snow melt, domestic hot water, and pool heating. They can also be used as refrigerant condensers, evaporators, and oil coolers.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Double Pipe or Double Wall Heat Exchangers | Heat Exchangers | Plate Brazed Heat Exchangers

Heat Exchangers cool/heat incoming with minimal energy.

info@productnews.com (ThomasNet News�) — Tue, 19 Oct 2010 08:33:57 -0400

Operating stand-alone or integrated into packaged energy recovery system, Z-Duct(TM) has no moving parts and works in applications where fresh outdoor air is being drawn into building. In air conditioning systems, functionality makes it possible to pre-cool incoming supply air by transferring energy from outdoor air to exhaust air. Reverse is true for heating systems. Dimpled and folded sheet of aluminum or layers of desiccant-coated synthetic media act as primary heat transfer surfaces.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Commercial/Residential HVAC Heat Exchangers

Liquid Hydrocarbon Remote Controller aids liquid measurement.

info@productnews.com (ThomasNet News�) — Tue, 21 Sep 2010 08:31:08 -0400

Able to measure and control range of liquid hydrocarbons, ROC800L leverages ROC800-Series Remote Operations Controller architecture to accelerate and facilitate installation. Configuration approach, enabled via ROCLINK(TM) 800 software, covers diverse applications, and device can also be programmed to perform PLC functions using Function Sequence Tables or DS800 programming tool. Controller can also be connected to DeltaV(TM) digital automation system, enabling remote sevice diagnostics.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Controls and Controllers

Search for suppliers of: Thermal Hydrocarbon Control Systems | Remote Controls

Heat Exchangers feature thermally conductive H2 and FEP tubing.

info@productnews.com (ThomasNet News�) — Mon, 13 Sep 2010 08:31:11 -0400

Enhancing heat transfer rate for cooling and heating applications, thermally conductive H2 PFA and FEP fluoropolymer tubing has been integrated into Fluorotherm heat exchangers. Tubing composition has been optimized to provide best combination of thermal conductivity and strength while retaining basic non-stick property of fluoropolymers. Heat exchangers suit applications in steel, metal finishing, galvanizing plants, and chemical processing applications.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Corrosion Resistant Heat Exchangers

Cast Heat Exchangers promote efficiency and cleanliness.

info@productnews.com (ThomasNet News�) — Mon, 13 Sep 2010 08:31:07 -0400

Durocast® Series 250 and 550 cast-in-aluminum heat exchangers heat fluids indirectly instead of via direct immersion, resulting in clean heating environment. Thermal conductivity of aluminum accelerates thermal response and promotes controllability, while design also protects oils and other viscous fluids from thermal breakdown. Capable of heating liquids and gases, these low mass, electric, inline circulation heaters feature heater elements protected from corrosive attack.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Corrosion Resistant Heat Exchangers | Aluminum Heat Exchangers | Heat Exchangers

Attachable Heatsinks suit TO220s with thin base plates.

info@productnews.com (ThomasNet News�) — Tue, 07 Sep 2010 08:33:29 -0400

Attached by being pushed onto housing, FK 252 series are designed to accommodate electronic components in TO220 housings with 0.5 mm thick base plates. Integral retaining clips keep component in place and ensure favorable heat transfer from component to heatsink. Series includes 4 different versions: for vertical installation using 2 soldering pins with different lengths, for horizontal soldering, and for installation without soldering pin.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Computer Hardware and Peripherals

Search for suppliers of: Heatsink Assemblies

Heat Sink Screw is designed for GHz BGA socket.

info@productnews.com (ThomasNet News�) — Mon, 17 May 2010 08:33:13 -0400

Able to dissipate up to 16 W with additional fan mounted on top, HS-SG-6002 is designed for 31 x 31 to 42.5 x 42.5 mm package size, and also serves as compression mechanism for GHz socket. Constructed with 7075 Aluminum and optimized using fin design, heat sink screw has thermal resistance of 0.530 C/W.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad
Computer Hardware and Peripherals

Search for suppliers of: Aluminum Heat Sinks | Printed Circuit Board (PCB) Heat Sinks

Air-to-Air Heat Exchanger uses heat pipe technology.

info@productnews.com (ThomasNet News�) — Tue, 23 Mar 2010 08:34:04 -0400

Providing closed-loop cooling, Mighty Mini CC100 delivers small form factor protection against overheating in all types of electrical, electronic, drive, and device control panels. Unit offers 700 BTU/hr cooling capacity with efficiency of 10 W/°C. Sealed enclosure protects electronics from contamination caused by dirt, oil, humidity, and corrosives.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Air To Air Heat Exchangers

Immersion Coil Heat Exchangers are offered with PVDF frame.

info@productnews.com (ThomasNet News�) — Mon, 01 Mar 2010 08:31:39 -0400

PVDF frame Immersion Coil Heat Exchangers feature standard tubing coils consisting of either FEP for use with steam pressures up to 30 psig or PFA tubing, which is rated up to 60 psig. Corrosion resistant products are suited for use in cases where tank or bath temperatures exceed 150° F, and can operate up to temperatures of 210° F.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Heat Exchangers

Heat Exchanger eliminates hotspots in data centers.

info@productnews.com (ThomasNet News�) — Thu, 12 Nov 2009 08:32:45 -0400

Mounted in moveable door, which is fixed to frame attached to rear of rack, Liebert XDR removes heat from IT racks before it enters data center. Microchannel unit relies on server fans for hot air movement across cooling coil, utilizing pumped refrigerant which eliminates danger of equipment damage from water leakage. Accommodating new and existing racks, Liebert XDR cools up to 20 kW of rack load, even in environments that are not arranged in hot aisle/cold aisle configuration.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: Noren Products, Inc - PNANewsletter Ad

Search for suppliers of: Heat Exchangers