ThomasNet Industrial Newsroom -

Line Heating System features modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2008 08:07:43 -0500

Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Heaters | Process Heaters | Pipeline Heaters

Electric Process Heater offers 4,160 V operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:31 -0500

Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Heaters | Process Heaters

Dry Block Heater features dual temperature control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Feb 2008 07:49:08 -0500

Operating over temperature range of ambient to 100°C, Dri-Block® DB-2TC accommodates 2 aluminum insert blocks with independent digital temperature controls, making it suited for multiple users or for applications where samples have to be transferred between 2 temperatures quickly. Unit has heat-up rate of 30-100°C in 19 minutes with temperature stability of ±0.1°C. Compact design allows heater to be placed in fume cabinets where corrosive/toxic chemicals are used.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Laboratory Equipment & Supplies | Process Heaters

Refrigerating/Heating Chiller has adjustable controls/alarms.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Sep 2007 12:43:01 -0500

Featuring adjustable temperature, pressure, and flow rate alarms, 1.5 ton Refrigerating/Heating Chiller provides heating and cooling for semiconductor fabrication processes. Integral 7,500 or 9,000 W heater controls temperature during vacuum chamber or reaction vessel heating, soaking, and cooling cycles. From 5 to 90°C, with ±0.5°C temperature stability, chiller provides up to 6,328 W of cooling. Its ¾ or 1 hp turbine pump accommodates various process flow and pressure requirements.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Semiconductor Processing Heaters | Semiconductor Processing Equipment

Process Air Heater heats nitrogen/inert gas up to 1,400°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Jul 2007 07:39:17 -0500

Featuring digital display temperature control, SKORPION(TM) Process Air Heater provides full closed-loop PID temperature regulation with ±2° accuracy. Device includes serpentine coil design for maximum heat transfer efficiency, blower motor, air intake, and intelligent over-temperature sensing system. All-metal air source ensures operation in dusty environments, and unit also features adjustable air damper for flow control.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Process Heaters | Air Heaters

Focus Pre-Heater accelerates lead-free rework.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Apr 2007 07:45:36 -0500

Pre-heater convection tool, PCT-100, can be used with or without board holder to perform hand assembly or rework tasks on SMT or through-hole assemblies. Optional dedicated board holder is available, and 10 cfm fan fitted to unit promotes heating and cooling. Designed to promote process control, product uses convection air heating to optimize responsiveness and avoid temperature overshoot. Pre-heater can be used with SnPb solders as well as lead-free ones.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Convection Heaters | Air Heaters | Printed Circuit Board (PCB) Assembly Equipment

Heaters suit semiconductor and manufacturing processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Dec 2006 08:07:19 -0500

With integrated temperature controller and insulated silicone heater mat, Series 48 Heaters feature re-settable high temperature safety limit device that meets UL® 1998 and CE 60730 requirements. Units provide dedicated mechanical relay output for high-low temperature alert, no-arc relay for power switching, LEDs for local alarm indication, and field programmable set points for adjustable temperature control.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Semiconductor Processing Heaters | Custom Heaters

Heating System suits tin bath heating process.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Sep 2006 07:44:58 -0500

Including 4 ultra single-ended recuperative gas burners that are set up on each side of tin bath to provide direct heat to glass, Float Fire Auxiliary Heating System offers up to 850,000 Btu/hr of heat. Gas and air systems handle pressure regulation, while electronics manage safety functions and control of fuel and air to burners. System is also available as portable unit.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Heating Systems

Heater utilizes non-mechanical routing technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Aug 2005 10:26:39 -0500

Offering tight hole-to-hole tolerance, 384-Hole Heater provides temperature uniformity across 384 well Polymerase Chain Reaction sample block and enables unobstructed view of reaction process. Etched Thermofoil(TM) element encourages heat uniformity as reagents are cycled through PCR thermal well steps of denaturing, annealing, and extension. Heater is available with integrated thermistor, or RTD, and can be custom profiled to match any system.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Health, Medical and Dental Supplies and Equipment Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Medical Equipment Heaters | Etched Foil Heaters | Process Heaters

Gas Heater adds heat to cold water pressure washers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 May 2005 07:30:25 -0500

Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as 12 ft jumper hose with quick connect.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Water Heaters | Pressure Process Heaters

Blower Heater suits harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Apr 2005 09:53:43 -0500

Corrosion-resistant Model HD3D provides comfort heating and freeze prevention in harsh, corrosive, dirty, and wet environments. With stainless steel brackets, hose-down unit can be directly mounted to wall or ceiling. NEMA 4X control box is located on front of heater. Wiring connector provides watertight seal in event of replacement of motor, limit control, or elements. Heater is suited for wastewater treatment plants, steel mills, ships, car washes, and foundries.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Industrial Heaters | Hazardous Area Heaters | Air Heaters | Heating Blowers

Make-Up Air Unit suits institutional applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Mar 2005 07:39:51 -0500

Model IG-HV features power-vented, 80% efficient, indirect gas-fired furnace with post-purge cycle. It provides airflow volumes to 7,000 cfm with heating capacities up to 400,000 btu/hr input. Unit is supplied with double width, double inlet, forward curved blowers tested to AMCA standards. It offers 3 heating and ventilation options plus 8 economizer and mixing box options, and can be supplied with 8:1 turndown furnace control.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Indirect Fired Heaters | Air Heaters | Ventilators

Heating/Cooling System handles 200 and 300 mm wafers.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Jan 2005 08:16:36 -0500

Heating/Cooling Module is BOLTS compatible for integration with standard wafer handling automation. It uses resistive heating elements to achieve better than 450°C heating in less than 15 sec. After processing, module rapidly cools wafer to allow safe return to FOUP. Backside particle and metals contamination is minimized through low contact wafer chuck.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Wafer Processing Heaters

Boiler is available with stainless steel jacket.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Aug 2004 07:40:14 -0500

Futera II Series boilers offer 7 models ranging from 500-1950 MBH and provide up to 85% efficiency with low NOx levels. Advanced troubleshooting and self-diagnostic control provides step-by-step cycle of operation. Optional brushed SS jacket provides corrosion resistance for indoor/outdoor installations in harsh environments. Boilers suit domestic hot water or hydronic space heating applications.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Low Nitrogen Oxide (NOx) Emission Boilers | Stainless Steel Boilers | Process Boilers | Boilers | Jacketed Boilers | Industrial Boilers

Radiant Tube Heaters come in low-intensity versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Apr 2004 11:19:00 -0500

Available in 19 sizes with capacities from 40,000-250,000 BTU/hr, LTU unitized, gas-fired radiant U-tube heaters are offered in natural and propane gas versions. Total heater length varies from 17-27.5 ft, and units incorporate self-contained draft inducer; one-piece cast-iron burner; pre-assembled tube and reflector body with 6-bolt aluminized steel burner box assembly; and monitoring lights for on-line diagnosis.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Gas Radiant Heaters | Tubular Heaters

Radiant Heaters may be used indoors or outdoors.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Mar 2004 07:40:42 -0500

Offered in 3 sizes, CRDS, CRDP, CRTS, and CRTP 2- and 3-element fixtures are available with painted steel or stainless steel housings. They accept interchangeable metal sheath, quartz tube, and quartz lamp elements. Single-element CRC fixtures, with quartz-tube elements, come in 1,500, 2,000, and 3,000 W sizes. Plug-in radiant heaters, CPRG and CPRP, feature quartz tube elements, and RBC-1 consists of heavy-duty single metal sheath element radiant heater.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Radiant Heaters

Heater provides portable, IR radiant heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Nov 2003 07:44:06 -0500

Handheld Model HL2 High Intensity Infrared Heater utilizes 2 clear, 500 W, tubular quartz heat lamps to provide instant electric radiant heat and produce surface temperatures of 680°F within 2½ min. Heater features 2 heat ranges, self-contained internal cooling system, and built-in variable power controller to control heat intensity. Lux-Therm snap-in system allows lamps to be replaced without rewiring. Applications include plastics curing, laboratory testing, and paint removal.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Electric Unit Heater ranges in size from 3-10 kW.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2003 00:00:00 -0500

Series UHI comes with built-in controls and can be wall or ceiling mounted. Standard voltages include 208, 240, 277, and 480 in single and 3-phase. Cabinets are heavy gauge galvanized steel and tubular elements are 304 SS. Individually adjustable louvers direct airflow where needed. Single point, line voltage connection enables heater, fan, and controls to be connected to same branch circuit. Built-in, automatic reset thermal cutout provides overtemperature protection.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Air Heaters | Unit Heaters | Industrial Heaters

Photoresist Oven allows automated handling of 300 mm wafers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 May 2002 08:11:45 -0500

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It also includes active cooling.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Ovens | Bakeout Ovens | Wafer Processing Heaters

Glo-Ring Infrared Heat Tool

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2001 16:55:31 -0500

The Eraser Company Incorporated offers the Glo-Ring Infrared Heat Tool for use in shrinking heat shrinkable tubing and material used in the assembly of all types of electrical and medical equipment. The Glo-Ring is a hand held, lightweight tool that uses infrared heat to penetrate and shrink tubings. Its circular quartz elements open and close to encircle the workpiece, resulting in quick, even heating and shrinking. The Glo-Ring does not blow hot air, nor does it contain a motor, allowing to be used in a clean room. Four sizes of elements from ½" OD to 3" OD are available. A variable temperature control on the handpiece regulates the amount of heat to the elements.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation