ThomasNet Industrial Newsroom -

MEMS Micro Hot Plates suit chemical sensor applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:55 -0500

Featuring platinum resistive thin-film microheater attached between freestanding thin-film silicon nitride and silicon dioxide membranes, KMHP-100 MEMS microhotplate can operate continuously at up to 650°C. It consists of micromachined silicon die attached to gold-plated TO-18 package, which insures stable operation in harsh/hostile environment. Freestanding thin-film silicon nitride membrane thermally/electrically isolates platinum microheater from silicon substrate microstructure.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Hot Plates | Microelectromechanical Systems (MEMS)

Clear Heaters deliver heat while transmitting light.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:44 -0500

Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and suitable for heating LCDs, cockpit displays, outdoor card readers, and portable military radios.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Transparent Heaters | Etched Foil Heaters

Electric Process Heater offers 4,160 V operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:31 -0500

Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Heaters | Process Heaters

Unit Heater is built with explosion-proof design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:18 -0500

In addition to T3C, 320°F ignition temperature code rating, ULTRA-SAFE(TM) EXP features dual over-temperature protection with automatic and manual reset over-temperature cutouts. Product uses non-toxic propylene glycol heat transfer fluid and has 70 psig relief valve setting. Three available corrosive-resistant construction options are available for use in dry, non-corrosive areas; wastewater treatment plants; and chemical plants where chlorides are present.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Unit Heaters | Hazardous Area Heaters | Explosion Proof Heaters

Drum Heaters are flexible, thin, and efficient.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 May 2008 07:49:57 -0500

Providing even heat to contents of drum, DRUM-DHW-55 Series of OMEGALUX® drum heaters feature built-in thermostat that measures 50-425°F and metal screen that is grounded electronically for safety. Heaters wrap around standard 55-gallon drum and attach with spring and hook arrangement. Suited for petroleum, mining, manufacturing, pharmaceutical, and chemical industries, they are resistant to mechanical damage and chemical substances.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Induction Light Fixture suits hazardous environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Apr 2008 07:36:42 -0500

Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Lighting Fixtures | Induction Fixtures

Preheater enables soldering at lower operating temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Mar 2008 07:41:43 -0500

PCT-1000 Programmable Preheater is benchtop system delivering forced convection heat that can be controlled with 4 time and temperature zones and additional cooling zone. External thermocouple input can be used for control of output temperature based on board or component temperature and also as process monitor. Designed to create convection vortex, system can be operated in manual or programmable automatic mode where up to 50 thermal profiles can be stored.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: Preheaters

Plenum-Rated Heaters offer blower delay feature.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Mar 2008 07:41:34 -0500

Designed for concealed and plenum space applications, Berko® and QMark® PRH Series offer multiple heat rise selections, with heating ratings from 3-15 kW. Max outlet air temperature is 200°F at static pressure of 0.2 in. Available with voltages of 208, 240, 277, and 480 V, heaters feature steel-finned heating elements, acoustic fiberglass insulation, and forward-curved centrifugal blower. Small unit is 24 x 19½ x 12½ in., while large cabinet measures 35 3/8 x 18 x 18 in.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Duct Heaters | Confined Space Heaters

Dry Block Heater features dual temperature control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Feb 2008 07:49:08 -0500

Operating over temperature range of ambient to 100°C, Dri-Block® DB-2TC accommodates 2 aluminum insert blocks with independent digital temperature controls, making it suited for multiple users or for applications where samples have to be transferred between 2 temperatures quickly. Unit has heat-up rate of 30-100°C in 19 minutes with temperature stability of ±0.1°C. Compact design allows heater to be placed in fume cabinets where corrosive/toxic chemicals are used.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Laboratory Equipment & Supplies | Process Heaters

Electric IR Spot Heater warms commercial decks and patios.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:51 -0500

Designed for commercial and residential deck and patio applications, HZE X5C 015 series has curved back design and compound reflective IRLens(TM) that focuses IR energy into central beam. Unit requires 1,500 W of electric power at 120-277 V and will raise temperature of people and objects in 14 ft² area by 15° or more from 8 ft away. Heater can be wall-, ceiling- or post-mounted.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Electric Infrared Heaters | Patio Heaters | Infrared Heaters

Automatic Fill System features integrated adhesive melter.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jan 2008 07:35:40 -0500

Combining melter and adhesive feed system, ProBlue® Fulfill(TM) System automatically maintains desired adhesive levels in melter tanks. Integrated capacitance sensor detects low adhesive levels and transmits signal to suction lance. Using vacuum, system conveys adhesive as pellets, pastilles, and mini-slats from supplied closed adhesive storage container directly to melter tank. Adding small quantities of adhesive at regular intervals prevents sealed tank from running dry.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Packaging Products & Equipment
Material Handling and Storage

Search for suppliers of: Glue Melters | Hot Melt Adhesive Machinery | Automatic Feeders

Nozzle Heater is suited for hot runner systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jan 2008 07:30:47 -0500

THERMASLEEVE(TM) Hot Runner Nozzle Heater comes with rapid thermal response that allows heat to be created precisely where it is needed. Designed to have intimate contact with surface of nozzle which optimizes heat transfer, it features laser structuring to create customized temperature profile. Self-clamping electric heater can be installed and removed from nozzle with custom installation and removal tool, and accommodates thermocouple secured to external body of heater.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Nozzle Heaters

Compact Heaters utilize ceramic PTC technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jan 2008 07:08:52 -0500

With rated power output to 1,500 W, PTC Heaters can accommodate wide array of self-regulating PTC thermistor elements, which operate at nearly constant temperature over range of voltage and environmental conditions. Heaters require no thermostat and have virtually unlimited life with no moving parts. Applications include space heaters, CCTV cameras, mat/cushion heaters, telecommunications equipment, and vehicle/windshield heaters.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Positive Temperature Coefficient (PTC) Heaters

Indirect Heating Systems offer clean heat to workspaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Dec 2007 07:49:13 -0500

Self-contained models HD-7.5 and HD-3, along with process air blower that allows for single-point power and duct connections, integrate indirect fired heat exchanger designed to keep products of combustion and moisture separate from conditioned air. Both feature adjustable air flow and safe control of outlet temperature. HD-7.5 has 100°F temperature rise at 8000 SCFM with high temperature limit of 230°. HD-3 has 100°F temperature rise at 2500 CFM with high temperature limit of 179°.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Indirect Fired Heaters

Bulk Melt Systems include performance enhancing parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Dec 2007 07:42:28 -0500

Designed for quiet operation and optimal process efficiency, Therm-O-Flow 20 and 200 incorporate NXT(TM) Air Motor, Mega-Flo(TM) platen, and sensors that signal when drum changes are needed. EasyKey(TM) control displays actual and set point temperatures, and material totalizer can be reset to track material usage. Along with 7-day automatic startup timer, systems feature self-diagnostics support, which allows for predictive and preventative maintenance strategies.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Glue Melters

Adhesive Melters deliver optimized flexibility and control.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2007 07:43:52 -0500

Suited for product assembly, packaging, and paperboard converting operations, AltaBlue(TM) TT melters use variable-speed ac motors with spur gear pumps and process range of materials. All-electric solutions, used in manual, semi-automatic, and automatic applications, have Teflon®-coated tube tank that eliminates dead corners and minimizes adhesive char. To facilitate operation, features include status-at-a-glance indicators and 7-day clock.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Packaging Products & Equipment

Search for suppliers of: Glue Melters | Hot Melt Equipment

Waste Oil Heaters range from 155,000 to 500,000 btu.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Oct 2007 07:47:21 -0500

Offering alternative to disposing of used oil, Waste Oil Heaters come in 4 models with integrated air compressor that produces clean, dry air and eliminates need for shop air plumbing. Multi-directional air louvers give user ability to direct heat where they need it, while swing-out removable burner enables access for cleaning and maintenance.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Oil Fired Heaters

Waste Oil Heaters range from 155,000-500,000 BTU.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 15 Oct 2007 08:09:48 -0500

Offering alternative to waste-oil disposal, Waste Oil Heaters are equipped with optimized waste oil supply pump for consistent, trouble-free operation. Three out of 4 models include on-board air compressor. Providing clean combustion, heaters have dual, multi-directional air outlets, swing-out removable burner for cleaning and maintenance, and blower motors ranging from .75-3.6 hp.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Zero Clearance Heaters install in concealed spaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Oct 2007 07:57:42 -0500

Rated at 2,500 W, Models PHFP25 and CHPR25 are designed for installation in concealed spaces including crawl spaces, plenum spaces, and areas between finished ceilings and drop ceilings. They include thermostat range of 40-90°F; enclosed, permanently lubricated fan motors; and fan-delay feature, which eliminates cold-air circulation at start-up. Measuring 14 x 12 in., heaters are crafted from 18 ga steel and protected from corrosion by gray, polyester powder-coat finish.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
HVAC

Search for suppliers of: Light Commercial & Residential Heaters | Confined Space Heaters

Heater Modules use thick film technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Oct 2007 07:58:35 -0500

Suited for semiconductor wet chemistry applications, Thick Film Quartz Heater Modules feature optical trip that protects heater from excessive boiling, non-contact dry fire, and insufficient fluid flowing through heater. Thick film avoids permeability problems experienced with Teflon-coated products by utilizing semiconductor-grade quartz. Intended for deionized water and aggressive chemicals, modules enable glassware fluid pressures up to 75 psi.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Quartz Heaters