ThomasNet Industrial Newsroom -

Heater and Furnace recycle used oils into free shop heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:18 -0500

Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive displacement fuel metering pump, and automatic thermostat-controlled operation.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Space Heaters | Fuel Oil Heaters | Industrial Oil Fired Furnaces

Quench Vacuum Furnaces offer power management option.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:35 -0500

To cut electrical consumption, High Pressure Quench Vacuum Furnaces feature power management option, which creates single system of alternate control of heating and cooling processes using single frequency converter. Programmable cooling rate is controlled according to load temperature. Offering martempering quench capability, system works with various cooling gases and provides step-less control of heating and cooling power.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Furnaces | Quenching Furnaces

Oven Furnace accommodates high-temperature applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:18 -0500

Built to order with customizable dimensions, BTU outputs, and accessories, FireBox-HT oven furnace is designed for tool room heat treating and high-temperature (up to 2,150Â°F) precision casting. It is insulated with 4 Â½ in. of firebrick, backed up with additional 2 in. of 1,200Â°F block insulation. Applications include heating tool steel, carbon steel, cast iron, and other high-temperature metals.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Heat Treating Furnaces

Metal Melting Furnace suits applications up to 1,000Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Feb 2008 07:53:21 -0500

Buzzer furnace melts low temperature white and soft metals including pewter, babbitt, tin, solder, bismuth, lead, zinc, and die casting alloys. It is available with digital controls, high limit safety, and comes in 5 standard sizes with lead capacity from 160 to 2,700 lb. Customization includes special sizes, tilting furnaces, high temperature metals, and bottom drain spout units.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Metal Melting Furnaces | Melting Induction Heating Furnaces | High Temperature Furnaces

Roll Out Furnace targets automotive repair market.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jan 2008 07:37:41 -0500

Available in 4 standard sizes, Buzzer 450 to 1,350Â°F oven type furnace is designed for automotive engine rebuilding and specifically suited for cast iron/aluminum engine head repair. Insulating firebrick provides abrasion resistance and retains available heat to ensure optimal slow cooling, while fabricated stainless steel roll-out tray facilitates and accelerates casting repair. Safety pilot, 100% shut-off safety valve, and digital temperature controls are standard.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Heat Treating Furnaces | Annealing Furnaces | Furnaces

Furnaces feature Microwave Assist Technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Dec 2007 07:50:46 -0500

Available with air or atmosphere control, MAT Furnaces include 1,100, 1,600, and 1,700Â°C lab scale models suited for binder burnout, calcining, and sintering applications. Production scale gas or electric MAT furnaces are also available in batch, elevator, and tunnel kilns. With MAT technology, radiant and microwave heating are applied simultaneously, leading to uniform heat distribution and complete binder removal.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Radiant Tube Furnaces | Laboratory Furnaces | Atmosphere Gas Furnaces | Electric Furnaces

Laboratory Furnaces utilize MAT and radiant heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Apr 2007 08:03:46 -0500

Offered in 2 temperature ranges and 2 chamber sizes, furnaces combine controllability of radiant heating elements with thermal equalizing effect of microwave heating system. Furnaces incorporate over-temperature protection control system as well as temperature controller that allows for 20-segment programming of both radiant and microwave heating. Use of Microwave Assist Technology (MAT) promotes energy efficiency and uniform sample heating.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Radiant Tube Furnaces | Laboratory Furnaces

Electric Furnace heat treats metals up to 2,350Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:58 -0500

With interior chamber dimensions of 13 x 13.5 x 8.75 in., Econo-Heat(TM) Model 2928-B is suitable for sintering ceramics and glasses as well as heat-treating, tempering, and hardening metals. Exterior shell is constructed of stainless steel sheet metal and 4 in. of insulation to guarantee low skin temperature. Operating from 240 V/15 A, furnace features recessed heating elements and single set point temperature controller with Â±2% accuracy.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Furnaces

Microwave Furnace offers max temperature of 1,700Â° C.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Feb 2007 07:15:50 -0500

Operating at 2,450 MHz frequency and featuring 12-200 kW power, SPHERIC/SYNO-THERM(TM) continuous horizontal microwave furnace features adjustable tunnel running speed of 15-60 mm/min. Furnace includes conveyor belt, push-pad, push-boat, and temperature measuring IR sensor and thermocouple. Microwave sintering system is used to form complex industrial parts by heating metal or ceramic powders until they adhere.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: High Temperature Furnaces | Conveyor Furnaces | Continuous Furnaces | Sintering Furnaces

Vacuum Furnace provides thermocouple control to 1,000Â°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Dec 2006 08:07:24 -0500

Model CVF 1000 Ultra High, Clean Vacuum Furnace is designed for degassing and conditioning components that are used inside vacuum environment to reduce outgassing and pumpdown time. It features 24 in. wide x 30 in. high x 24 in. deep SS water cooled chamber with hinged front door, high vacuum cryogenic pumping, molybdenum and inconel hot zone, full computer control with data logging, and recipe-driven procedures with optional chart recording.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Furnaces

Self-Cleaning Feeder is immune to jams.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Nov 2006 07:41:20 -0500

Designed to eliminate no-coal flow events, PosimetricÂ® Feeder handles materials exhibiting range of characteristics including wet, dry, lumpy, sticky, abrasive, or granular. Positive displacement device operates without surges or partial feeding and incorporates only one moving part, a closed, circular chamber with openings at its input and output points. Material enters, continuously locks up within chamber, and is carried to discharge point at constant rate.

This story is related to the following:
Material Handling and Storage
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Furnace Fuel Feeders | Rotary Feeders | Coal Feeders

Inert Atmosphere Furnace provides temperatures to 2,000Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Nov 2006 07:49:10 -0500

With workspace dimensions of 30 x 48 x 30 in., electrically heated No. 989 features 57 KW nickel-chrome wire coils supported by vacuum-formed ceramic fiber. Roof-mounted, heat-resisting alloy circulating fan, powered by 2 hp motor with V-belt drive, maintains inert atmosphere for workload. Designed with continuously welded outer shell, furnace has 7 in. thick insulated walls, 7Â½ in. floor insulation, and electrically operated vertical lift door.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Furnaces

Moldable Material suits insulating and patching needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Oct 2006 07:41:56 -0500

Superfil 607 Moldable wet mastic material is designed for continuous use up to 2,000ÂºF, and has smooth, semi-sticky consistency for application to refractory and fibrous surfaces. It is supplied ready-to-use from pail or caulking tube and used for repair and reinsulation of furnace lining cracks as well as for covering metal hardware. Non-wetting to molten aluminum makes it suited for applications in aluminum containing troughs, boxes, and furnaces.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: High Temperature Insulation | Furnace Insulation | Flexible Insulation | Mastic Compounds

Vacuum Furnace suits industrial brazing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Jun 2006 08:05:00 -0500

Utilizing solid-state induction heating technology, Model VF-20 heats parts of virtually any shape in high-temperature, high-vacuum environment. It requires less than 8 minutes to reach 1,900Â°F and cools down to 400Â°F in less than 20 minutes. Furnace operates at high vacuum or partial pressure of inert gas. Chamber has base vacuum of 5 x 10<sup>-6</sup> Torr with leak-up rate of less than 1 micron/hour.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Brazing Furnaces | Melting Induction Heating Furnaces

High-Temp Box Furnaces suit high speed steel processing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 31 May 2006 08:03:11 -0500

Designed for 2,450Â°F operation, HS Series employs silicon carbide heating elements, which are controlled off line with SCR power supply that automatically compensates for changes in element resistance. Furnace chamber is lined with ceramic fiber and heats to 2,200Â°F in 55 min. Available in single and dual chamber models in sizes from 6 x 6 x 12 in. to 12 x 18 x 24 in., furnaces feature heavy gauge sheet steel construction, platinum/rhodium thermocouple, and double-pivot horizontal swing door.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: High Temperature Furnaces | High Speed Steel Hardening Furnaces | Box Furnaces

Hybrid Heater uses furnace and heat pump.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 24 Feb 2006 07:10:24 -0500

Hybrid Heat(TM) system combines furnace with heat pump, which also acts as air conditioner in hot weather. Operated via electricity, environmentally sound heat pump moves heat without flame and features PuronÂ® non-ozone-depleting refrigerant. System combines heating methods to minimize effects of gas and electricity costs.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Heat Pumps | Hot Air Heaters | House Heating Furnaces | Air Furnaces

Monitoring System profiles brazing furnaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jan 2006 07:03:33 -0500

With thermal barrier and data logger connected to survey arms, CAB (Controlled Atmosphere Brazing) Surveyor system helps ensure furnace meets conditions for optimum brazing. System captures baseline profile of furnace, and once baseline is achieved, limits are set to ensure conditions around profile are working within specification. Wizard driven software allows setup and analysis of profiles, and color light indicators specify whether run was within specification.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Monitoring Systems | Brazing Furnaces

Programmable Furnace heats to 1,200Â°C in under 24 sec.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Dec 2005 07:08:42 -0500

Suited for high-temperature materials testing and analysis, tabletop MILA-3000 heats samples using IR gold image furnace with programmable digital temperature controller; clean, atmosphere-controlled, quartz glass vacuum chamber; and gas controller. Mini-Lamp Annealing system can be used for various heating and cooling experiments, with its controlled heating rates of 50Â°C/sec, temperature uniformity of Â±2Â°C, and 1 kW power consumption for 20 mmÂ³ samples.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Vacuum Furnaces | High Temperature Furnaces | Annealing Furnaces

Gas-Heated Box Furnace operates at 2,000Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Dec 2005 07:06:19 -0500

With workspace dimensions of 72 x 36 x 48 in., No. 939 is heated by 700,000 BTU modulating natural gas burners with floor-mounted combustion air blower. Insulated walls are made with 5 in. of 2,300Â°F ceramic fiber and 2 in. of 1,700Â° ceramic fiber. Measuring 7 in. thick, floor comprises 4Â½ in. 2,300Â°F firebrick and 2Â½ in. 1,900Â°F block insulation. Furnace includes manually operated vertical lift door, digital temperature controller, and fused disconnect switch.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Industrial Gas Fired Furnaces | Box Furnaces

Protective Atmosphere Furnaces feature gas-tight design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 14 Sep 2005 07:12:26 -0500

Constructed with continuously welded, heavy-gauge sheet steel shell and gasketed door assembly, GT Series includes 16 bench models and 16 floor stand models that operate in flammable/combustible atmosphere at temperatures up to 2,100Â°F. Furnaces include firebrick or ceramic fiber insulation lining, hearth plate to protect floor and support workload, and coilwound heating elements on side walls. Chamber sizes range from 6 x 6 x 6 in. to 24 x 24 x 48 in.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Heat Treating Furnaces