ThomasNet Industrial Newsroom - Thermal & Heating Equipment

Pottery Kilns are capable of firing to cone 10 on 120 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Jun 2009 08:28:14 -0400

Designed to fire porcelain, stoneware, china, ceramics, and decals, Caldera XL and Caldera XL-KS pottery kilns are 7½ in. square x 9 in. deep inside and made with 3 in. thick insulating firebricks. Caldera XL comes with digital temperature controller, while switch-operated Caldera XL-KS features Autocone Kiln Sitter. Kilns were designed for testing glazes and glaze application ideas before running production quantities in larger kiln.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Ceramic, China, Porcelain, Pottery & Tile Kilns | Electric Kilns

Laboratory Furnace can be used in wide range of applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 17 Jun 2009 08:30:09 -0400

Multipurpose LF series is suited for high temperature vacuum or inert gas treatment of metals and ceramics, reactive studies and small scale sintering studies. It has operating temperature of up to 2,000°C in vacuum or in inert gas and offers all metal hot zone of 3 in. dia by 5 in. high with ultra clean tungsten mesh heating elements and tungsten/molybdenum heat shields. Operating pressure ranges from 2 psig to vacuum of 10-3 or 10-6 Torr depending on vacuum system selected.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: High Temperature Furnaces | Laboratory Furnaces | Sintering Furnaces | Vacuum Heat Treating Furnaces

Mini Salt Bath weighs only 50 lb once fully loaded.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Jun 2009 08:30:31 -0400

With fluid immersion depth of over 9 in., MSB-500 is suited for benchtop comparison calibrations of SPRTs and thermocouples from 180-500°C. It achieves 10 mK stabilities and uniformity using less than 14 lb of salt, and features built in RS-232 communication, and touch screen interface pre-programmed with standard calibration points for simple one-touch settings. Safety features include independent low and high cutout and stainless steel grating to protect dual stirring blades.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Salt Baths

Thermoplastic Heat Exchangers are corrosion resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 May 2009 08:29:02 -0400

Available in PFA, E-CTFE, PVDF, and PP, Polytetra Series heat exchangers can divert flow to side of shell, to avoid high fluid flow forces that may damage thin-wall internal tubes of shell and tube style heat exchanger. Customizable heat exchangers are suited for electroplating industries and clean chemistry applications, such as photovoltaic and semiconductor processes.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Corrosion Resistant Heat Exchangers | Custom Heat Exchangers | Shell & Tube Heat Exchangers

Truck-Loading Oven suits cleanroom applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 May 2009 08:28:59 -0400

Utilizing 80 kW Incoloy-sheathed tubular elements to heat two 34 x 54 x 72 in. workspaces, 500°F No. 1010 includes 10,000 cfm, 7½ hp recirculating blower, which provides horizontal airflow to common central duct system. Electrically heated oven has 4 in. thick insulated walls, Type 304 stainless steel interior with continuously backwelded seams, stainless steel exterior with No. 4 brushed finish, and 24 x 24 x 6 in. thick HEPA fresh air filter with 2 in. prefilter.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Laboratory and Research Supplies and Equipment

Search for suppliers of: Truck Loaded Ovens | Electric Ovens | Curing Ovens | Cleanroom Ovens

Adhesive Melter suits low-consumption PUR applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 May 2009 08:32:17 -0400

Without requiring inert gas, PURBlue(TM) 4 adhesive application systems simplify use of moisture-cure reactive (PUR) hot melt adhesives from 2, 3, or 4 kg foil-encased slugs. Small amount of adhesive is heated, as needed, as to reduce thermal stress and protect bonding characteristics of unused PUR. Pneumatic piston optimizes contact between adhesive and melting grid, while graphical controls facilitate programming and operation.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Glue Melters | Hot Melt Adhesive Dispensers | Adhesives Dispensers

Cable Kit simplifies floor warming coverage.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 May 2009 08:40:13 -0400

Warm Tiles® DFT 120 V floor warming cable kit allows contractors to install full floor warming coverage simply by lacing free form cable on floor wherever heated area is required. Cables can be used over variety of substrates including plywood, backer board, and concrete, and are placed 3 in. apart in typical room above heated area, and 1.5 in. apart for room above unheated area, on concrete slabs, or in high heat loss room. Kits are available for heating areas from 11-108 sq ft.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Floor Heating Systems | Heating Cables

Front Panels also act as heat sinks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Apr 2009 08:28:58 -0400

Aluminum based black anodized Elma front panel heat sinks dissipate heat while covering open sections of enclosure. Cooling fin extrusion has width of 42 HP and comes in 1U high increments. Each fin is built upon 1.5 HP pitch to leave enough space in between for screw heads. Heat sink front panels come in various sizes and configurations, but are specifically designed for 19 in. technology. EMC versions with mounting bracket for gaskets are also available.

This story is related to the following:
Controls and Controllers
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Computer Hardware and Peripherals
HVAC

Search for suppliers of: Panel Fronts | Aluminum Heat Sinks | Cooling Panels

Hot Plates and Stirrers handle 2 liter samples or less.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Apr 2009 08:31:47 -0400

Offering stirring speeds from 100-1,500 rpm, EchoTherm(TM) HP50 and HS50 Digital Hot Plates and Digital Stirring Hot Plates feature membrane keyboard and full function LCD, where target and actual sample or plate temperature, stirring speed, and timer are continuously visible. Heater tops are 6 x 6 in. square and feature 400 W heaters. They are available in milled-flat cast aluminum or ceramic with temperatures that can be set to 400°C and 450°C, respectively.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Laboratory and Research Supplies and Equipment

Search for suppliers of: Hot Plates | Laboratory Stirrers

Electric Tempering Furnace operates at 1,450°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Apr 2009 08:35:47 -0400

Providing 60 x 60 x 60 in. workspace, No. 837 is equipped with 180 kW nickel chrome wire coils supported by stainless steel framework, and rear wall-mounted, heat-resisting alloy recirculating fan, powered by 25 hp motor with V-belt drive and water-cooled bearings. Eight inch thick insulated walls comprise 3 in. of 2,300°F ceramic fiber and 5 in. block insulation, while 7 in. floor insulation is made from 5 in. of 2,300°F firebrick and 2 in. of block insulation.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Preheating Furnaces | Tempering Furnaces | Electric Furnaces

Belt Conveyor Oven offers 30 x 120 x 15 in. workspace.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Apr 2009 08:35:46 -0400

Equipped with 18 kW Nichrome wire heating elements, 350° Model 832 uses 4,100 cfm, 3 hp recirculating blower to provide downward vertical airflow to load. Electrically heated oven has aluminized steel interior/exterior with 4 in. insulated walls. Measuring 24 in. wide, Chemglas 5 x 5 mesh fiberglass fabric conveyor belt is coated with Teflon and powered by ¼ hp motor with variable speeds from 1.5-30 ipm. Photoelectric eyes senses belt position and shifts steering roller.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Ovens | Curing Ovens | Conveyor Ovens

Heat Exchanger removes up to 3,000 W of enclosure heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Apr 2009 08:31:02 -0400

Compatible with 48 Vdc and 115 Vac power supplies, CLIMAGUARD outdoor heat exchangers are double-crimped and dip-sealed to prevent harsh environmental elements from entering enclosure. With support for both surface- or recess-mounting, lab- and field-tested units are UL Type 12/3R/4 rated and Telcordia GR-487 capable. Maximum 2,000 W of heater option is available on dc and ac volt heaters, and variable-speed blowers come standard on dc-powered units for noise free operation.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Closed Loop Heat Exchangers

Heat Blowers utilize long-life heating element.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Apr 2009 08:29:13 -0400

Offering air delivery rate up to 23 cfm, Professional Heat Blower Series feature color-coded temperature keys, which lock in specific temperatures from 200 to 1,200°F, to enable at-a-glance verification. Adjustable stand supports the blower during bench work and stores temperature keys when not in use, and balanced design helps reduce fatigue during long-term, hand-held use. Applications include window tinting, packaging, shrink wrapping, thawing pipes, and working with plastics.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: High Temperature Blowers | Heating Blowers | Hot Air Tools

Compact Furnace Series enables in-house heat-treating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Mar 2009 08:38:06 -0400

Available in 4 sizes with chambers from 9 x 12 x 14 in. to 12 x 14 x 24 in., Red Devil Dual Chamber Series conserves space by situating hardening chamber above drawing oven. Chambers hold 25 lb/ft² of hearth area and come with horizontal swing door, which has safety switch that automatically shuts off power when door opens. Upper hardening chamber is rated to 2,200°F, while lower draw chamber heats to 1,200°F and uses stainless steel recirculating fan for uniform heat.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Heat Treating Furnaces | Hardening Furnaces | Furnaces

Ovens/Incubators increase laboratory safety, efficiency.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Mar 2009 08:32:31 -0400

Equipped with ergonomic and intuitive interfaces, Isotherm® Laboratory Ovens and Incubators utilize Solaris(TM) Pre-Heat Chamber Technology for temperature uniformity. Heat is transmitted into the chamber via 4-zone heated air jacket, and VentiFlow(TM) Ventilation System offers adjustable fan speed and air exchange rates to meet application requirements. Also included, SmartSense(TM) Microprocessor PID Controls regulate temperature to user set-point and facilitate access to data.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Ovens | Laboratory, Culture, Bacteriological & Carbon Dioxide Incubators

Hot Bonding Machine is used for curing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Mar 2009 08:35:24 -0400

ACR® 3 Hot Bonder is available with one or two zones, each featuring 10 thermocouple sensors, 30 A max output, and dual vacuum system (electric pump and vacuum venturi). Operated via 8.4 in. color touchscreen interface, machine offers temperature control up to 1,400°F and runs off of universal voltage from 100-130 Vac or 200-240 Vac. Data transfer is facilitated via USB flash drive, and software allows up to 30 programs to be stored for later use.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Curing Ovens | Hot Bonders

Circulation Heater features non-welded construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 Mar 2009 08:30:30 -0400

Providing indirect heating, CAST-X 3000 consists of 2 helical coiled tubes and tubular elements cast into aluminum body, which serves as heat transfer media between tubular element and heavy-wall 316L process tubes. Fluid path is independent of heater sheath, preventing fluid contamination. Integrated thermostat housing allows heater to run dry, while dual tube construction allows water flow rates to 20 gpm when run in parallel. Explosion-proof enclosure is optional.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Coil Heaters | Indirect Circulation Heaters | Circulation Heaters

Resistive Heating Technology is suited for medical equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Mar 2009 08:33:48 -0400

Based on Thick Film on Steel technology (WDBR), resistive heating elements on insulated stainless steel substrates enable use of intrinsically safe, flameproof planar device that can be formed in any flat shape to deliver precision heating control in sensitive medical applications. Fuses and thermistors can be integrated directly into heating elements to provide additional over-temperature protection as well as closed-loop feedback control.

This story is related to the following:
Health, Medical and Dental Supplies and Equipment
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Medical Equipment Heaters | Electric Heating Elements | Heating Elements

Gas-Fired Walk-in Oven provides temperatures up to 500°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Mar 2009 08:32:12 -0400

With 48 x 48 x 72 in. workspace, No. 1003 includes modulating natural gas burner with 800,000 BTU/hr and 3 hp recirculating blower providing vertical upward airflow. It features 4 in. thick insulated walls; aluminized steel exterior; Type 304, 2B finish SS interior; and insulated floor with truck wheel guide tracks. Onboard safety equipment processes flammable solvents and unit also includes temperature, timer, fused disconnect, and thermocouple controls.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Walk-In Ovens | Gas Fired Ovens | Drying Ovens

Horizontal Heat Treating System suits aerospace industry.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Mar 2009 08:37:29 -0400

Designed to solution-treat aluminum, natural gas fired batch oven with non-heated manual quench tank accepts 4 x 4 x 4 ft basket and is rated for 1,250°F max and 1,100°F normal operating temperatures. Heating system features 500,000 BTU/hr air heat burner, and hearth consists of 2 rows of wheels rated for 3,600 lb loads. Recirculation system and programmable temperature controller lend to temperature uniformity of +5.4°F/-1.8°F @ 600°F and +5.3°F/-6.1°F at 1,100°F.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Materials and Material Processing

Search for suppliers of: Heat Treating Ovens | Gas Fired Ovens