ThomasNet Industrial Newsroom -

Test Stand evaluates machine tool covers.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:26 -0500

Designed to test telescopic machine tool covers, High-Speed Test Stand includes computerized controls that allow combinations of strokes, speeds, and acceleration/deceleration rates to simulate high speed machining centers. Speed is variable up to 1,312 ft/min, and acceleration can be adjusted to 4 G. Accelerated masses with forces up to 1,304 ft-lb can be tested.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Stands

Hydraulic Test Stand tests hoist capability to 7.5 tons.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jul 2007 07:49:57 -0500

Portable, hand-operated Mobile Test Stand is designed for testing of hoisting equipment as required by applicable sections of ASME Code B30.16 Overhead Hoists. It can be moved to multiple inspection areas with base mounted wheels or with any lift truck using built-in fork slots. Able to apply test loads up to 15,000 lb at 6,787 psi, it is capable of both static and dynamic testing. Hand-operated hydraulic pump eliminates need for electrical power.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hydraulic Test Stands

Hydraulic, Hand Operated Test Stand has 20-ton capacity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Apr 2007 07:40:18 -0500

Capable of static and dynamic testing, Mockbee 20 ton test stand can be operated in vertical or horizontal applications via its 2-stage, hydraulic hand pump. It is designed for testing hoisting equipment as well as other related lifting equipment after repair or inspections are performed as required by ASME Code B30.16. Stand also tests function of overload devices. Components include reinforced steel frame, fine-adjustment pressure valve, and 4.0 in. dia pressure gauge.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Stands

Air Test Stand conducts airflow calibrations on gas meters.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Nov 2006 07:43:41 -0500

Designed to accurately measure flow rates from 0.4-2,800 cfm with Â±0.5% accuracy, Air Test Stand includes set of 7 sonic nozzles, each with its own control valve allowing quick connection to calibration manifold. Manifold accommodates wafer meters from Â½-4 in. dia, along with insertion meters in 6 in. dia pipe. Customized software automates some of calibration process and, after calibration, creates detailed calibration certificate.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Gas Calibration Equipment | Gas Flow Calibrators

Test Stand measures initial force of nitrogen gas springs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Dec 2002 07:42:12 -0500

Digital Test Stand verifies pressure during repair and maintenance, and measures force after production runs to document force loss or gain. Lightweight unit can mount directly to table. Maximum rated capacity is 5,000 lb with Â±5% full-scale accuracy. Digital readout provides both lb and kg of force. Holding fixtures are provided for smaller gas springs.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Stands

Force Test Stands are controlled by PCs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 May 2002 07:50:03 -0500

Tabletop TCÂ²-i and SnapShot-i provide compression, tension, and flexure testing capabilities up to 550 and 220 lbf, respectively. Both use intelligent load cells that send test data directly to PC via serial port with speed of 2,000 samples/sec. User-friendly i-software controls test stand and compiles data. Analytical capabilities include graphing, data interrogation, and exporting. Both are programmable for crosshead travel speed from 0.039 to 19.7 ipm.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Tensile Strength Testers | Compression Testers | Flexural Strength Testers

Test Stand helps measure forces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 25 Apr 2002 07:38:14 -0500

Motorized Model ESM force measurement stand has modular construction and removable base, allowing it to be mounted in many different configurations. Stepper motor prevents speed variation with load. Speed adjust dial is graduated in in./min and mm/min. Maximum load is 200 lb, maximum travel is 13 in., and speed range is 0.5 to 13 in./min. Typical applications include material testing, spring testing, peel testing, and product integrity testing.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Stands

Force Measurement Stand suits material and spring testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Mar 2002 07:39:50 -0500

Model ES30, 200 lb manual test stand has maximum travel of 13 in. and travel rate of 0.05 in./handwheel revolution. Throat clearance is 3 in. Total dimensions are 6 in. W x 10 in. D x 22 in. H. Unit is available with optional 6 in. electronic linear travel scale. Removable base allows it to be used as part of larger systems. Stand is field upgradable to motorized version by installing optional motor drive.

This story is related to the following:
Material Handling and Storage
Test and Measuring Instruments

Search for suppliers of: Test Stands | Spring Testers | Stands