ThomasNet Industrial Newsroom -

Extension Kit supports ExpressCard form factor.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 13 Jun 2008 07:45:36 -0500

Consisting of EC-8560 ExpressCardÂ® and PXI-8565 PXI card, EC-8560/PXI-8565 extends more PXI slots from ExpressCardÂ®-based laptop computer via shielded cable connection up to 23 ft in length. ExpressCardÂ®-to-PXI extension system expands I/O capability of measurement and automation systems from mobile device and offers isolation to minimize effect of high frequency interference from CPU, memory, or chipset of host system on PXI cards. Kit withstands high temperature and harsh vibration.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Kits | Communications Boards | Extender Boards | PCI Communication Boards

Inertial Motion Tracker offers application-specific tools.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:23 -0500

Suited for applications relying on data output for orientation, stabilization, or navigation, MTi trackers are available with software and firmware that contains predefined settings for optimized orientation output in specific areas. Firmware of MTi and MTi-G includes algorithms for increased performance under various conditions, and SDK contains MT Manager software tool for configuring, recording, and displaying IMU/AHRS/GPS outputs in real-time.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Inertia Measuring Instruments | Inertia Sensors Test Equipment

Inertial Sensors are suitable for harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:20 -0500

Designed for safety critical applications, inertial accelerometer Model MS9000 is available in variety of G ranges from Â±2 to Â±250 G. Sensor operates over extended temperature ranges with milli G bias stability over extended lifetime. It is enclosed in LCC20 ceramic package measuring 8.9 x 8.9 mm and conforms to MIL-STD-883-E standards required by aerospace and military markets.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Extreme Environment Sensors | Inertia Sensors Test Equipment | Accelerometers

Work Cell targets chemistry testing market.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Mar 2008 07:35:43 -0500

Consolidating chemistry and immunoassay testing targeted to high-volume laboratories, UniCel DxC 880i SynchronÂ® AccessÂ® clinical system offers menu of more than 150 different chemistry and immunoassay tests, with 120 onboard. System can process up to 1,440 chemistry and 400 immunoassay tests/hr, respectively. It features closed-tube sampling and closed-tube aliquotting capabilities to eliminate de-capping and re-capping steps in laboratory process.

This story is related to the following:
Plant Furnishings and Accessories
Test and Measuring Instruments

Search for suppliers of: Test Cells | Chemistry Analyzers

Extender Board suits MicroTCA and AMC-based systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Feb 2008 07:42:19 -0500

Offered as passive extender module, AMC extender card supports all fabric connectors as defined in AMC.x and MicroTCA specifications. It extends all fabric signals and 3 clock lines out of card cage area so Advanced Mezzanine Card (AMC) can be tested or debugged. Plugged into AMC slot, solution features metal frame that holds board under test securely in place. Management and payload power can be individually switch isolated.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Extender Boards

Microbiology Systems come in 40- and 96-panel models.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jan 2008 07:07:40 -0500

Suited for mid- and high-volume clinical diagnostic microbiology laboratories, MicroScanÂ® WalkAwayÂ® plus Systems offer simultaneous automation of overnight, rapid, and specialty panels that test for both gram negative and gram positive bacteria. Both systems combine minimum inhibitory concentration testing with automated features, including automated maintenance and dial-up system diagnostic capability.

This story is related to the following:
Test and Measuring Instruments
Health, Medical and Dental Supplies and Equipment Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Microbiology Instruments | Bacteriological, Serological, Stool Blood, Urine Test Strip & Virological Medical Diagnostic Kits

Extender Boards feature rigid-flex-rigid PCB design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Jun 2007 07:53:46 -0500

Designed to provide access to both sides of test board, VXS Payload Extender Boards bring circuit card completely out of card cage or enclosure so that it can be tested or debugged. There are test points for all of lines on each 160-pin connector and MultiGig P0 connector. Offered 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion, boards include ampmeter and feature digital indicator on front panel showing status.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Extender Boards

Control System targets testing in automotive laboratories.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 Feb 2007 06:58:51 -0500

HOST Cell Control System (CCS) features single computer test CCS consisting of fan-less processor, flash storage, and real-time operating system, and software to control dynamometer, fan, robot, and data acquisition. Software provides tools to create displays, sequences, drive curves, grade profiles, test monitors, and data acquisition schemes. Auto complete typing, library to check solutions in and out, and detachable tool pallets are also included.

This story is related to the following:
Controls and Controllers
Software
Test and Measuring Instruments

Search for suppliers of: Engine Test Cells | Testing Software | Control Systems

Extender Boards use rigid-flex-rigid PCB design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 03 Feb 2006 04:52:30 -0500

VXS Extender Boards utilize right angle pin connector that plugs into backplane, connected to flex circuit that wires to straight receptacle to receive plug-in board. Units bring circuit card completely out of card cage or enclosure so that it can be tested and debugged. There are test points for all differential pairs on MultiGig fabric connector for hub slots. Boards come in 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Extender Boards

ATCA Extender Board facilitates prototyping process.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Dec 2005 07:06:53 -0500

AdvancedTCA (ATCA) test extender board, which features metal frame with latching handles, brings circuit card completely out of card cage or enclosure for testing/debugging. Providing access to both sides of board under test, product extends power and IPMB signals. It has 10-layer stripline design and is designed for full populated fabric slot and power connector J10. Zone 3 section has flexible design that allows for customization.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Extender Boards

Sample Cell is designed for LA-ICP-MS applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 May 2005 07:52:09 -0500

Used to provides aerosol washout and transient signal analysis, SuperCellâ"¢ features 18.5 cmÂ² work area that accommodates multiple samples and standards simultaneously. When analyzing single-pulse, transient signals, design reduces aerosol dispersion, compressing and amplifying analytical information. For steady-state acquisitions, when sample is continuously ablated, unit displays typical signal rise times and rinse times of less than few seconds each.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Signal Analyzers | Transient Analyzers | Test Cells

Transmitter delivers smart machinery health management.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Mar 2005 07:32:34 -0500

Foundation fieldbus Model CSI 9210 acquires vibration, temperature, motor flux, and machine speed on ac motor-pump machine trains, analyzes measured data, calculates machinery health, issues alerts if necessary, and recommends action to be taken. Analysis engine identifies damaging conditions such as pump cavitation, bearing degradation, excessive synchronous vibration, and motor overloading and overheating. Results are communicated into process automation systems.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Machine Monitors | Maintenance Monitors

Dial Automated Swage Cell offers modular flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Oct 2004 08:07:06 -0500

With max cycle time of 6 sec, Dial Automated Swage Cell performs deflashing, gauging, testing, and sizing operations on vibration control bushings. Cell, requiring 80 ftÂ² of floor space, is assembled in modular arrangement and comprised of sub-assemblies. Dual dial, precision-synchronized indexing tables transfer bushings from station to station, and standard bushing size ranges from 1 in. dia x 1 in. tall to 3Â½ in. dia x 4 in. tall.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Cells

High Temperature/Pressure Cell operates with rheometers.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Aug 2004 07:46:01 -0500

Comprising cup and bob assembly in fully-enclosed environment, Model HPC 300 mounts directly onto CVO, C-VOR, and Gemini rheometers, enabling measurement under conditions that simulate fluid processing. All wetted parts are Hastelloy C, allowing use with chemically aggressive samples. Integrated electrical heater achieves temperatures up to 300Â°C with operating range of 40â�"300Â°C. Pressurization is from external source or from vapor pressure generated by sample under test.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Cells

Inertial Measurement Unit suits embedded applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jun 2004 07:50:40 -0500

Model MMQ50 utilizes solid-state quartz MEMS inertial rate sensors and silicon MEMS accelerometers. Powered by Â±8 Vdc supplies and consuming 4 W, unit features full 6Â° of freedom sensing capability and internal microprocessor that thermally compensates sensors. Suited for stabilization or guidance and control applications, device outputs serial RS-644 digital signal data stream comprising angular velocities and linear accelerations about 3 orthogonal axes.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Inertia Measuring Instruments | Inertia Sensors Test Equipment

Test Cell Control System provides powertrain system testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Apr 2004 07:58:45 -0500

DynoLABâ"¢ PT v4.1 offers Ethernet support, providing bandwidth for data acquisition and enabling high level of remote monitoring. Wireless Ethernet offers potential to eliminate all physical connections between test cell devices and control room. Test system employs DynoLAB Test Executiveâ"¢ software based on National Instrument's LabVIEW architecture. It supports gas analyzers, function generators, oscilloscopes, and electric motor drivers.

This story is related to the following:
Test and Measuring Instruments
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Automotive Engine Test Systems | Engine Test Cells

Test Cabinet offers temperature range of -30 to +90Â°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Jan 2004 07:33:36 -0500

Model CCX Advanced Cyclic Corrosion Cabinet with 90Â°C option features temperature-resistant materials for dispersion towers and connectors, temperature-resistant fiberglass shell and gel coat, fiberglass cover with tempered-glass viewing window, and insulation around exposure zone. Unit replicates stresses that result in degradation including salt-saturated air and salt spray, high humidity, condensation, sunlight, and temperature variations.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Test Cabinets | Corrosion Testers

DMM Kit improves safety and utility of digital multimeters.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2003 08:11:43 -0500

Model CT3116 DMM Kit includes 2 fused probe bodies, 2 highly-flexible silicone jacketed leads, and 2 fully-insulated alligator clips. Leads are not affected by cold weather or hot soldering iron. Probes feature 4 mm contact tip and utilize internal ceramic fuses rated at 10 A. Alligator clips have IP2X connection covers which, when plugged into fused probes, maintain overall safety. All components are compliant with IEC61010-031 International Safety Specification.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Alligator Clips | Multimeter Test Leads

Multimeter Test Kit reads distribution panel voltages.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2003 07:37:13 -0500

Ten-piece Professional Series DMM Test Lead Kit includes test leads, 2 modular probe sets, crocodile clips, and sprung hooks. One probe set features sharp stainless steel tip for electronic and electrical test applications. Second probe set is configured with flat blade tip for hands-free testing of AC outlet receptacles. Test leads have over 250 fine strands of flexible, double insulated silicone wire, which is resistant to solder iron damage.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Multimeter Test Leads | Test Kits

Inertial Measurement Unit incorporates quartz sensors.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Feb 2003 07:35:56 -0500

MEMS-based Digital Quartz Inertial Measurement Unit utilizes GyroChipÂ® technology consisting of dual-ended quartz tuning fork rate sensor and vibrating quartz accelerometer. It provides delta theta and delta velocity output at 100 Hz in 6 axes, with linear acceleration and angular rate output at 600 Hz in RS-422 AMRAAM output format. Miniature unit is suited for guidance, navigation, and control for commercial, aerospace, and defense applications.

This story is related to the following:
Test and Measuring Instruments
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Inertial Guidance Systems & Equipment | Inertia Sensors Test Equipment