ThomasNet Industrial Newsroom -

Conductance Probe provides trouble-free level measurement.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 07:45:08 -0500

Available in 1-, 3-, and 10-point versions with 50 or 100 ft cable lengths, The Level Probe features blue and white PVC body with Avesta 254 Stainless Steel Sensors. Outer jacket of cable is PVC, and each individual conductor jacket is also PVC. Conductor wire is 18 AWG, tinned copper, with each conductor identified by number that corresponds to sensor position on probe. All 10-point probes are available with spacings between stainless steel sensors of 5, 6, 8, 10, and 12 in.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Conductivity Sensors | Probes

Thermocouple Probes connect directly to computer USB port.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Jun 2008 07:22:14 -0500

Featuring rugged transition joint construction and integral 6 ft shielded output cable, TJ-USB Series includes software that converts any PC running on Windows 2000, XP, or Vista operating systems into temperature meter, chart recorder, and data logger. CE compliant units with stainless steel, Inconel, or SuperOmegaclad XL construction are available in standard lengths of 18 and 24 in. and 2 different ranges of -73 to 315Â°C or -270 to 1,000Â°C.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Stainless Steel Probes | Thermocouple Probes

Flying Leads Probe aids embedded PCIe 2.0 design/validation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 22 May 2008 08:01:59 -0500

Compatible with E2960B Series PCI ExpressÂ® (PCIeÂ®) 2.0 analyzers, N4241F flying leads probe for PCIe 2.0 is designed for debugging embedded designs. It allows access to PCIe 2.0 links with no designed-in connectors at 2.5 and 5.0 Giga Transfer per second (GT/s) rates, exposing hard-to-reach signals and providing visibility to debug designs without influencing monitored signals. Solution can be used to probe link widths from x1 to x8 PCIe, and 2 probes can be combined for x16 analysis.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Inspection Probes | Circuit Testing Probes | Probes

Flying Leads Probe facilitates embedded PCIe 2.0 testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 May 2008 07:35:43 -0500

Designed for PCIe 2.0 E2960B Series analyzers, N4241F Flying Leads Probe 2.0 allows access to PCIe 2.0 links with no designed-in connectors at both 2.5 and 5.0 Giga Transfer/sec rates, which is essential for debugging embedded designs. Probe amplifier is outside probe tip, ensuring probe tip size is kept to minimum to address space constraints and thermal concerns. Unit can be used to probe link widths from x1 to x8 PCI Express, and 2 probes can be combined for x16 analysis.

This story is related to the following:
Software
Test and Measuring Instruments

Search for suppliers of: Signal Analyzers | Protocol Analyzers | Probes

DNA Analysis Kit is designed for epigenetic research.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Apr 2008 07:44:47 -0500

Imprint(TM) ChIP Kit provides complete solution for Chromatin Immunoprecipitation, including columns and reagents for DNA purification as well as integrated protocol for ChIP DNA amplification. Flexible format allows for immunoprecipitation and purification of DNA from mammalian cells or tissue in microwell format. Scientists can investigate complex DNA-protein interactions in vivo, and same-day downstream analyses are possible via quantitative PCR, MS-PCR, and DNA sequencing.

This story is related to the following:
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment

Search for suppliers of: DNA Probes | DNA Sequencers

Blast Pressure Pencil Probe features 1 Âµsec response time.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Apr 2008 07:34:11 -0500

Designed for broad range of explosion, blast, and shock wave testing, Series 137A Quartz, free-field, ICPÂ® Blast Pressure Pencil Probe has 500 kHz resonant frequencies. High-level 5 V output signal is capable of driving cable runs hundreds of feet in length, to safe zone for data acquisition. Featuring integral microelectronics that provide high signal-to-noise ratio, sensor can be used to capture both peak pressure and total impulse calculations.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Aerospace & Automotive Probes | Test Probes | Pressure Sensors | Shock Sensors

RF Production Probe Card utilizes membrane probe technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Apr 2008 07:44:00 -0500

Designed to aid in high-volume wafer testing of RF filters and switches for mobile handsets, 20 GHz P30 Pyramid Probe card has scalable architecture and is sized to enable multi-site testing. Solution's lithographic probes alleviate uncontrolled impedance and Microscrub(TM) creates small scrub mark that minimizes material displacement. Applications include multi-die testing for RF wireless, high-speed digital in SiPs, SOCs, and leading edge parametrics.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Wafer Probes | Inspection Probes | Wafer Probers

Touch Probe allows part checking on 5-axis machining.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Apr 2008 07:55:10 -0500

Model RMP600 combines strain-gage sensing technology with with frequency-hopping spread-spectrum radio transmission, which enables multiple machining centers with probe system to coexist in noisy industrial environments. RENGAGE(TM) technology allows sub-micron 3D probe performance on contoured surfaces, even with long styli. Compatible with machine controllers, probe delivers uni-directional repeatability of 0.000010 in. with 50 mm long stylus.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Touch Probes

Flying Probe Test System examines 2 UUT sides simultaneously.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Apr 2008 07:42:20 -0500

Compact, ergonomic Pilot V8 features vertical architecture enabling high speed, high-precision probing on both sides of UUT simultaneously. It is equipped with 8 electrical flying test probes, 2 Openfix capacitive and 2 power flying probes, plus 2 CCD cameras. Featuring full range of in-circuit and functional test capabilities, system can also implement net-oriented measurement techniques and can execute parallel tests on 2 UUTs at same time.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Circuit Testing Probes | Printed Circuit Board (PCB) Testers

Touch Probing System gauge mill-turned components.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Mar 2008 07:49:40 -0500

Based on type 41.00 probe, hard-wired, real-time Touch Probing System allows sliding-head CNC lathe users to measure turned and milled features on every component after machining, while it is still in counter spindle and before ejection. Gauging arrangement, which employs fixed probe mounted on headstock, is also suitable for use on fixed-head, bar-fed, twin-spindle turning machines. Tolerances down to plus or minus a few microns can be maintained.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Touch Probes | Gage Probes

Vision System offers multi-sensor metrology solution.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Feb 2008 07:41:56 -0500

Providing vision, touch probe, and laser scanning, Galileo AV1824 Video Measurement System delivers zoom magnification of 12:1 with programmable magnification range from 15-550x using auxiliary lenses. Dual output LED illuminator, ring light, and co-axial illumination provide optimal lighting. Offering measurement volume of 24 x 18 x 6 in., AV1824 includes Metronics Quadra-ChekÂ® QC-5000 3-D Metrology Software with video edge detection and full CNC control.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Test and Measuring Instruments
Vision Systems Sponsored by: Keyence Corporation of America - The Internet Resource for Machine Vision Solutions
Laboratory and Research Supplies and Equipment

Search for suppliers of: Vision Systems | Touch Probes | Metrology Equipment | 3D Laser Scanning Systems | Video Measuring Systems

BGA Probes enable DDR2 and DDR3 testing and evaluation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:42 -0500

Offering direct access to balls of DRAM with minimal loading or impact to signal integrity, DDR2 and DDR3 BGA probes provide signal access points to clock, strobe, data, address, and command signals of DDR3 DRAM for true compliance testing with oscilloscope. Logic analyzer provides timing and protocol view of DRAM activities. DDR2 BGA probe enables simultaneous access to oscilloscope and logic analyzer's full compliance and protocol validation.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Circuit Testing Probes | Ball Grid Array (BGA) Inspection Equipment

Wafer Probe Station targets process nodes 45 nm and below.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jan 2008 07:31:25 -0500

Based on 300 mm large-area microscope system with video and software navigation, Elite 300 includes PureLine II noise-reduction technology, and architectural design that ensures flatness and planarity, preventing probe needle shifting. It offers standard temperature range of -60 to 300Â°C, with 400Â°C thermal chuck option. For precise internal-node, sub-micron probing over temperature, Elite 300 has thermally matched components for mechanical stability.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Wafer Probes

Touch Probe is designed for machine tools.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jan 2008 07:28:25 -0500

Offering probing accuracy of less than Â±1 Âµm and repeatability factor of 2 s less than 0.25 Âµm, Model TS 740 infrared 3D touch probe enables machine tool users to perform measuring tasks that require high probing accuracy and repeatability. It features sensor technology that involves use of 3 sensor elements. Charges are detected by electronics and converted into trigger signals, and rapid acceleration/deceleration does not cause uncontrolled trigger signals.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Touch Probes

Tilt Switch Probes sense presence or absence of material.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Aug 2007 07:41:30 -0500

Featuring airtight, dust-tight, waterproof design, Series LTS is designed for use where bulk material to be sensed is exposed or open. Units contain SPST, normally closed switch and feature probe activation angle of 25Â° from vertical. Typical applications include high or low level detection in large hoppers, silos, crushers, or trippers, as well as high level control under stackers, and detection of plugged conditions at conveyor transfer points.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Hopper Level Switches | Switch Probes

Humidity/Temperature Transmitter features miniature design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:14 -0500

Intended for applications up to 300Â°F where 5/16 in. diameter stainless steel probe is required, Model HT-748 offers 0-1 Vdc output corresponding to 0-100% RH, as well as separate 0-1 Vdc temperature signal. Unit is available with straight probe, or with 1/8 in. NPT thread or flange for mounting. Remotely mounted in DB25 Sub-D connector at end of cable, electronics are accessible, allowing for recalibration of sensor when required.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Temperature Transmitters | Humidity Transmitters | Temperature Probes | Stainless Steel Probes

Active Differential Probes offer application versatility.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 Feb 2007 07:04:15 -0500

Models P7513 (13 GHz) and P7516 (16 GHz) connect to and acquire multiple complex signals simultaneously. With these speeds, users can debug and validate 3rd harmonic of 10 Gbps signals and perform compliance testing to 5th harmonic on signals up to 6.4 Gbps. TriMode(TM) probing enables engineers to switch between differential, single-ended, and common mode measurements without moving probe connections, and Z-Active(TM) probing architecture offers interchangeable probe tip modules.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Current Probes | Probes

Sample Probe Assembly is sealed against particulate entry.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 Feb 2007 07:04:37 -0500

Process Analyzer Sample Probe Assembly (SPA) is hot-tapped into process via isolation valve and sealed off with Conax Buffalo Packing Gland. Available in .250, .375, and .500 in. ODs, SPA is supplied with welded safety-stop collar and angled end for on-line extraction of process liquids or gases. Angled probe tip and tapered end reduce particulate entry. While supplied standard in 304 and 316 SST, SPA is also offered in Monel, Hastelloy C276, and Inconel 600.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sample Probes

Kits detect mutations in DNA.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jan 2007 07:17:28 -0500

Designed for universal primer fluorescent capillary electrophoresis, SURVEYORÂ® Kits detect mismatch mutations in DNA that has been PCR amplified using 2 fluorescent primers and digested with SURVEYOR Nuclease. SURVEYOR Nuclease identifies all base substitutions, insertions, and deletions and can detect multiple mutations in single fragment. Kits help scientists analyze genetic variation, even those present at very low levels such as somatic mutations linked to cancer.

This story is related to the following:
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment

Search for suppliers of: DNA Probes | Laboratory Test Equipment | Capillary Electrophoresis Equipment

Probe System tests wafers up to 300 mm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Dec 2006 07:46:54 -0500

Designed for high-temperature, multi-site testing, Model PM300WLR features large programmable microscope movement and cable handling solutions that facilitate use. Contact stability is guaranteed at temperatures up to 400Â°C and test times are minimized using multi-site probe cards. Design of probe system minimizes gas consumption, which is important for devices that must be tested in inert gas environments.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Wafer Probes