ThomasNet Industrial Newsroom -

Electrodes each measure pH and temperature.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

Featuring refillable epoxy body design, ROSS Ultra Triodes offer precision of 0.01 pH unit, accuracy within 0.03 pH units when using automatic temperature compensation, and fast temperature response within 1Â°C. Units are compatible with samples containing TRIS, proteins, and sulfides. Available in 4 different models depending on which meter customer has, all electrodes have waterproof BNC connectors for pH measurement.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: pH Electrodes | Triodes

ORP/pH Sensors provide versatile mounting options.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:31 -0500

Featuring foul-proof DryLoc connector and RytonÂ® sensor body to provide chemical compatibility for use in wide range of applications, Models 2724-2726 Signet DryLoc pH/ORP Sensors can mount into standard Signet 0.50-4 in. fittings as well as Georg Fischer tees and off-the-shelf reducing tees Â¾ in. or larger. Retrofitting into existing Â¾ or 1 in. tees can be done by using reducer bushing. Sensing elements are available in various configurations, and all provide 4-20 mA output.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Oxidation-Reduction Potential (ORP) Sensors | pH Sensors

Relay detects leaks and over-temperature conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:38 -0500

Series LDT monitors shaft seal and stator temp of submersible pump to help prevent failure. When leak is detected, output relay energizes, and LED indicator illuminates. Relay automatically resets when seal failure condition clears. NC temperature switch, mounted on stator, detects over-temperature, and bi-stable relay retains its position during power loss and latches on until remote reset button is pressed. Leak sensitivity is adjustable from 1 k to 35 kW.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Temperature Monitors | Alarm Relays | Leak Detectors

Leak Detectors feature up to 4 independent test circuits.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 07:44:55 -0500

Available in 6 models for 2- or 4-channel testing at 0-10, 0-3, or 0-1 psig, M1075-94X Pressure Change Leak Detectors feature transducer repeatability of 0.05% FSD, transducer sensitivity of less than 10-5 STD, and 0.01 second timer increments. Up to 1,000 test records can be stored and analyzed. Used as stand-alone instrument or integrated with PLC or PC, detector includes touch panel that displays all phases of test status, including reasons for rejects.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Leak Detectors

Moisture Meter suits laboratory and off-shore applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:40 -0500

Using absolute technique that yields results in minutes without requiring reagent calibration, MINIHYD determines water content of crude oil, petroleum products, liquids, gases, and powders. Instrument combines coulometry with Karl Fisher (KF) method to determine water content of samples, and fully automatic operation requires one button push to conduct titration. Product works with Automatically Compensated Errors control system to ensure bias-free results.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Moisture Meters

Intrinsically Safe Leak Detector meets ATEX directive.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:07 -0500

Suited for chemical, petrochemical, aviation, and oil processing industries, ExtrimaÂ® can be used for leak testing of aircraft fuel systems and detection with diluted hydrogen as tracer gas in explosive environments where safety requirements are high. Auto-Ranging function automatically tunes instrument's sensitivity for precise leak location. IP67 waterproof rated unit provides 7 hr continuous operation from rechargeable batteries.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Ethanol Emissions Detector complies with NSPS Subpart VV.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:12 -0500

Rated intrinsically safe for explosive environments, 2020ComboPRO utilizes photoionization detection (PID) technology to detect ethanol leaks in ethanol fuel production plants. Portable instrument has 0.1-10,000 ppm measurement range and meets/exceeds requirements of NSPS Subpart VV specific to EPA Method 21 for fugitive emissions. Critical data is displayed in less than 3 sec, and audible/visual alarms alert operator when pre-defined limits are exceeded.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Leak Detectors

Leak Detection System is web enabled.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:55 -0500

Designed to work in conjunction with SeaHawk leak detection cable, SeaHawk LD2000 distance read leak detection system pinpoints location of any conductive fluid on up to 2,000 ft of cable. It includes direct alarm notification via email or SMS, and web interface enables users to view status and modify system configurations. Unit allows for integration with existing building management systems via Modbus and BACnet, and/or network management systems via SNMP.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Leak Detection Flashlight slashes inspection time.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Mar 2008 08:14:15 -0500

With focused beam, OPTIMAX(TM) 3000 helps technicians pinpoint all refrigerant leaks, even elusive leaks that are missed by other lamps and by other methods of leak detection. Portable unit uses super-hi-flux LED technology equal to that of 150 W lamp. Powered by rechargeable NiMH battery, flashlight has inspection range up to 20 ft and 50,000 hour bulb life. Product comes with fluorescence-enhancing glasses and ac/dc battery charger.

This story is related to the following:
Portable Tools
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Rechargeable Flashlights | Leak Detectors

Leak Detection Relay monitors 2 submersible pumps.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Feb 2008 07:56:01 -0500

Used to monitor shaft seal of pumps before failure, Series DLD dual-channel leak detection relay finds leaks by sensing status of float or conductivity switch installed in seal cavity. It offers NO relay contacts to energize alarm and deenergize pump in event of leak and includes LED indicator. Installed via 2-pin octal mount, unit is available in sensitivities of 10-25 kW adjustable and 4.7-100 kW adjustable. All models utilize 120 Vac control voltage.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Alarm Relays | Leak Detectors

Particulate Transmitter utilizes induction sensing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Dec 2007 07:44:32 -0500

Usable as dust collector emissions monitor and leak detector, standard Series PMT is designed for general maintenance planning and process protection applications. Adjustable linear or logarithmic output scaling enables trending of baseline and high peak emissions that are caused by filter cleaning cycles and developing leaks. Protective layers on probe work with induction-sensing to ensure reliable operation with all types of particulate.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Emissions Monitors | Leak Detectors

Moisture Measurement System offers auto ranging capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2007 07:44:01 -0500

Consisting of wall-mounted console, NIR Sensor with power box, or RF sensor with oscillator box, BSP-901 Continuous On-Line System measures moisture from 0-80% Â±0.02-0.2% in variety of environments. Single-channel analyzer stores 5 separate 3-point calibration tables for multiple products utilizing nonvolatile battery-backed memory. System reports 7 moisture calculations/sec, while programmable smoothing function minimizes undesired output fluctuations by averaging readings.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Moisture Controls

Underground Remediation System detects petroleum leaks.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:55 -0500

Release Detection and Remediation Response (RDR2) is used for detecting petroleum leaks of underground storage tanks and fuel lines. Using IR technology and notification system, it provides immediate response to underground hydrocarbon contamination, automatically informs owners about leaks, and starts clean up process. Subsurface metabolism enhancement can be used instantly to allow microbes to consume petroleum contamination leaving only harmless water and carbon dioxide.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Waste Handling Equipment

Search for suppliers of: Remediation Equipment & Systems

Extended-Life pH/ORP Sensor suits processing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:39 -0500

Featuring plastic-threaded connections, RosemountÂ® Analytical PERpH-X(TM) 3500 can handle aggressive fouling applications. Double junction AccuGlass pH glass electrode is resistant to thermal and caustic degradation, and removable slotted tip protects glass bulb from direct impacts. Replaceable porous Teflon liquid junction has surface area optimized to maintain steady reference signal, and potassium-chloride-based reference electrolyte is unaffected by thermal/pressure cycling.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: pH Sensors | Oxidation-Reduction Potential (ORP) Sensors

Tester detects leaks in pouches and flexible packaging.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Nov 2007 07:46:03 -0500

Designed for package integrity testing of filled and sealed food pouches, retort pouches, and pharmaceutical and medical pouches, VeriPac 225 Leak Tester comes with flexible bladder that eliminates any stress on pouch seal during testing cycle. Different size pouches can be placed into testing drawer simultaneously and tested in one test cycle. Unit utilizes ASTM approved vacuum decay leak test method (F2338-05) recognized by FDA as consensus standard for package integrity testing.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Food Processing and Preparation

Search for suppliers of: Leak Testers | Leak Detectors | Pharmaceutical Packaging Leak Testers | Food Packaging Leak Testers

Portable Meter measures moisture of paper and paperboard.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Oct 2007 07:52:13 -0500

Microcontroller-based AM-III performs instantaneous, non-destructive moisture measurements of moving or stationary rolls and stacks of all types of paper and paperboard. Taking 16 measurements every second and displaying average twice in same period, product uses RF capacitance method to obtain pin-less moisture readings below surface of roll or stack. Product is also available with optional 2,000 reading-capacity Data Storage Unit for further processing/reference.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Moisture Meters

Smart Cuvettes measure pH and pO2.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 17 Oct 2007 07:46:41 -0500

Embedded in wall of standard 1 cm cuvette, pHuvette is optical pH sensor that traps bromcresol green pH indicator ions in hydrophilic sol-gel cage, and can be used with any spectrophotometer to provide accurate stable measurements of pH of fluid contained in cuvette. Including embedded oxygen sensor, pHoxyvette smart cuvette detects O2 by using phase fluorimetry to measure fluorescence quenching, while pHoxyvette cuvette comes with both pH and pO2 sensors.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment

Search for suppliers of: Cuvettes | Laboratory Instruments

Leak Detector is suited for gas-fired condensing furnaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Sep 2007 07:47:03 -0500

Developed for HVAC trade as 3 oz aerosolized can with 4 in. long nozzle extension, QwikDectector-HE(TM) can save lives by early detection of leaks due to defects caused by corrosion, expansion/contraction cracks, or manufacturer error that exposes occupants to CO. It penetrates heat exchanger fissure as small as 24/1,000 in. after one 5 sec spray into drilled 1/8 in. furnace plenum hole. Unit pinpoints openings within heat exchanger whether or not they are leaking at time of test.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Carbon Monoxide Detectors | Leak Detectors | HVAC Leak Detectors

Distance Read System accurately pinpoints leaks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Aug 2007 07:44:28 -0500

Configurable with up to 12 virtual zones, SeaHawk LD5100 determines location of any conductive fluid on up to 5,000 ft of SeaHawk Leak Detection Cable to within Â±2 ft. Thresholds for leak, delay, and contamination alarms are adjustable, and solution integrates with existing building/network management systems. After conductive fluid comes in contact with cable or SeaHawk zone spot detectors, system pinpoints location of leaks, annunciates alarm, and displays distance on backlit LCD.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Leak Detectors | Distance Measuring Equipment (DME) | Distance Measuring Instruments

Moisture Analyzer measures process and specialty gases.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jul 2007 07:43:34 -0500

Based on NASA optical technologies, system consists of cell that sample of H2O gas flows through, tunable laser diode (TLD) that emits specific wavelength of light through gas, optical detector, and software to analyze and output results. Unit is not susceptible to aging affects and does not require consumables or scheduled calibration. Capable of instantaneous measurements of trace amounts of H2O gas, analyzer will not become desensitized or drift over time.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Moisture Analyzers | Moisture Sensors