ThomasNet Industrial Newsroom -

Capacitance Probe features flexible design.

info@productnews.com (ThomasNet News) — Fri, 06 Nov 2009 08:43:12 -0500

PROCAP capacitance probe can detect lump material level at distances up to 35 ft and is suited for use with any lump material that might bend, damage, or break rigid probe. Hazardous location approved device operates below RF range and won't interfere or be affected by other electronic equipment. Visual LED on top of unit indicates sensor status of covered, uncovered or failed condition of unit. User can monitor up to 24 probes from single location when used with point level alarm panel.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Capacitive Probes

PEEK-Bodied pH Sensors feature 12 mm form factor.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:38 -0500

Foxboro® PH12 Series high-performance, disposable pH sensors feature PEEK material body that optimizes durability. Electrochemical sensors include Nafion ion barrier to protect reference junction and nonmetallic solution ground which enables addition of efficient sensor diagnostics. Temperature performance range is from -15 to +125°C and rugged units are also chemical-resistant. Sensors are available with flat, ruggedized glass pH electrode or domed pH electrode.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: pH Sensors | Electrochemical Sensors

Temperature Sensors have built-in digital communications.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:41 -0500

PyroBus series of infra-red pyrometers measure temperature of inaccessible or moving objects and materials, from -20°C to 500°C, accurately, with response time of 240 msec. Built-in RS485 Modbus RTU interface provides maximum, minimum, average and instantaneous temperature of material or process being monitored. Units measure 18 mm in dia and 103 mm long and are made of polished stainless steel, sealed to IP65. They come equipped with precision Germanium lenses for accurate optics.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
HVAC

Search for suppliers of: Infrared Sensors | Temperature Sensors | Infrared Pyrometers

High-Voltage Differential Probes offer 10:1 attenuation.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:40 -0500

With ability to provide general-purpose differential signal measurements, Agilent N2792A and N2793A differential probes have input resistance of 1 MW (for N2792A) and 200 kW (for N2793A) and low input capacitance of 3.5 pF (for N2792A) and 1 pF (for N2793A) to minimize circuit loading. It can be powered by USB port on scope or computer, or 9 V internal battery. They are compatible with any oscilloscope with 50 W BNC input.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Differential Analyzers | Probes

IR Temperature Sensor has measuring range from -30 to 1,600°C.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:55 -0500

Two-wire, 4-20 mA loop-powered, programmable thermoMETER CSmicro 2W has built-in processing electronics to linearise sensor output. It features silicon coated optics (15:1 or 75:1) and offers system accuracy of ±1.0% and ±0.3% of reading, respectively. Optional USB connection and CompactConnect software enable user to setup and configure sensor or to change emissivity to suit target material. Sensor can be used in ambient temperatures up to 130°C without having to cool sensor head.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers
HVAC

Search for suppliers of: Infrared Pyrometers | Non-Contact Pyrometers | Infrared Sensors | Non-Contact Sensors | Temperature Sensors

Active Differential Probes target RF/Microwave instruments.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:57 -0500

Models U1818A and U1818B feature high differential input impedance from 100 kHz to 7 or 12 GHz, respectively, and are compatible with Agilent network, spectrum, and signal source analyzers. Devices provide frequency response of ±1.5 dB and noise less than -130 dBm/Hz at 10 MHz to 12 GHz. They also feature biasing from Agilent's RF and microwave instruments probe power port or bench top power supply.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments
Computer Hardware and Peripherals

Search for suppliers of: Spectrum Analyzers | Signal Analyzers | Network Analyzers | Test Probes

Micromanipulated Probe System uses liquid helium or nitrogen.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:24 -0500

Micromanipulated probe system with horizontal external magnetic field features typical loss rate of less than 0.8 Lph at 5K and operates from 3-475K, with option up to 650K. Vibration level is ±25 nm and long-term drift is approximately 2 nm/min. Featuring cryogenic Hall probe and readout to measure magnetic field value at chuck, and supported on floating vibration isolation table, system includes micoroscope, CCD camera, and monitor with resolutions of 2-5 microns.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Magneto-Optical Devices | Magnetic Analyzers | Probes

UV-Based System deters illegal in-facility smoking.

info@productnews.com (ThomasNet News) — Thu, 24 Sep 2009 08:28:00 -0500

Suited for buildings in cities and states where it is illegal for employees to smoke, CatchaSmoker series uses UV flame detector technology to catch smokers in offices and factory bathrooms. Technology detects smoker lighting up and alerts management, either with loud alarm or totally silent/stealth alarm, via building-wide paging system. Installation can be accomplished by regular maintenance staff in less than 1 hr per location.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Ultraviolet (UV) Flame Detectors | Flame Detectors

Flame Detectors are available with HART communications.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:29:03 -0500

Flame detectors FL3100H (UV/IR) and FL3101H (UV-only) detect fires and provide alarm outputs directly from detector while maintaining false alarm immunity. In addition to process variable, HART protocol permits access to device configuration, diagnostics, as well as maintenance and alarm records. Features include continuous optical path monitoring, 4-20 mA stepped output, 3 SPDT high current programmable relay outputs, and RS-485 serial output with Modbus RTU protocol.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: UV/IR Flame Detectors | Ultraviolet (UV) Flame Detectors | IR Flame Detectors | Flame Detectors

Analytical Sensors precisely determine Ammonium levels.

info@productnews.com (ThomasNet News) — Fri, 04 Sep 2009 08:26:15 -0500

Immersion/insertion S10 and valve retractable S17 sensors are fully re-buildable and feature 316 SS body that incorporates sensing element, temperature module, and signal conditioner with cabling. Replaceable pIon electrode cartridge measures activity of free Ammonium ions in solution with concentrations from 0.5-18,000 ppm over pH range of 2-10 and temperatures from 0 to +40°C. Sensors support integration with C22 Analyzer for automatic pH compensation.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: pH Sensors | Sensors

Laser Sighting Tools are designed for IR temperature sensors.

info@productnews.com (ThomasNet News) — Thu, 03 Sep 2009 08:37:53 -0500

With 20 x 1 mm mounting thread, Model LSTL is compatible with PyroUSB sensors, while model LSTS has 16 x 1 mm thread for PyroCouple and PyroEpsilon non-contact infrared temperature sensors. Made of anodized aluminum, lightweight tools screw onto front of sensor for precise indication of where sensor is aiming. Laser is activated by means of push button on front of tool which has latching mechanism. Tools are powered by single lithium 1/2 AA 3.6 V battery.

This story is related to the following:
HVAC
Test and Measuring Instruments
Sensors, Monitors and Transducers
Optics and Photonics
Portable Tools

Search for suppliers of: Temperature Sensors | Infrared Sensors | Laser Aiming Systems | Laser Tools

Differential Probes suit floating signal measurement.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:39 -0500

Operating at 25 MHz and 100 MHz, high-voltage models N2790A and N2791A allow earth-grounded oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common-mode voltage. Probes offer user-selectable attenuation settings and come with various probe tip accessories for use with small and large components in tight places. Each probe can accurately measure up to 3.5 nsec of fast transient edges in switching power supplies.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: High Voltage Probes | Current Probes

Radio Transmission Touch Probes target CNC machine tools.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:35 -0500

Utilizing FHSS technology, Touch Probe Systems allow automated job set-up and in-process measurement of all sizes of CNC machine tools. Model RMP40, measuring 40 mm in dia and 50 mm long, is suited for multi-axis and mill-turn applications in which line-of-sight between probe and interface cannot be maintained. Designed for hostile turning environments, Model RLP40 is sealed to IPX8 and further protected by eyelid that prevents high velocity swarf and chips from causing damage.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Touch Probes | Inspection Probes

Differential Solder-In Probes have high-bandwidth design.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:31 -0500

Comprised of 13 GHz D1305, 16 GHz D1605, and 20 GHz D2005 models, WaveLink probes are optimized for rise time performance (20 ps - D2005), minimal probe noise (25 nV/sqrt Hz), and minimal ac loading (175 W min). Performance characteristics lend to accurate characterization of serial data signals, and transmission line design features attenuating tip followed by amplifier output to differential transmission line connecting to oscilloscope with platform/cable assembly.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Probes

Fused Test Probes allow indication of live voltage.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:30:03 -0500

Providing indication of live voltage even with blown fuse, FTP Fused Test Probes feature built-in fuses and sheathed tips for additional safety. They feature 2 mm threaded probe tips with removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads. Rated to CAT III 1000 V, CAT IV 600 V and 10 A, modular probes feature operating temperature of -20 to 50°C, and comply with Canadian ESA standards.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Test Probes

Digital IR Temperature Sensors offer 10 ms response.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:46 -0500

Able to measure IR from distances up to 10 ft, FT Series provides non-contact detection of surface temperature from 32-2,462°F. Analog output can be scaled to user-defined range, and up to 4 sets of discrete upper and lower-limit outputs and emissivities can be stored. With 1.5 mm field of view, Model FT-H10 is suited for thin, fast moving targets including heat seals, hot melts, and heat-treated or hot formed parts. Optional air purge enclosure eliminates dust buildup.

This story is related to the following:
Test and Measuring Instruments
HVAC
Sensors, Monitors and Transducers

Search for suppliers of: Temperature Sensors | Non-Contact Sensors | Infrared Sensors | Digital Sensors

Ultrasonic Gas Detection System reduces fire/explosion risk.

info@productnews.com (ThomasNet News) — Fri, 07 Aug 2009 08:37:16 -0500

Combining Gassonic detectors with modular, 6-channel MC600 Controller, ultrasonic gas leak detection system suits range of process safety monitoring applications. It responds to ultrasonic noise generated by escaping gas at pressures as low as 145 psi for 5-20 m coverage radius. Gas leaks are detected regardless of ventilation rates, gas dilution, or direction of leak, and controller lets users configure relays for ultrasonic gas leak detectors and select zones/voting schemes.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Combustible Gas Detectors | Ultrasonic Detectors | Leak Detectors

Touch Probe features mechanical activation.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:37 -0500

Suitable for HEIDENHAIN and third party controls, Model TS 642 features mechanical activation microswitch in taper shank, which allows activation once probe is inserted in spindle. Once removed, probe automatically shuts off, optimizing battery life. Integrated blower jets enable cleaning of measuring point with coolant or compressed air. With transmission range of 7 m, probe can be operated for 800 hr of continuous duty with set of Li-Ion batteries.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Touch Probes

Leak Detectors include Ethernet connectivity.

info@productnews.com (ThomasNet News) — Wed, 08 Jul 2009 08:33:38 -0500

Equipped with touchscreen and intuitive menu-driven operator controls, M-1075-Y Mass Flow Leak Detectors provide high-speed leak testing of parts from several cubic centimeters to several liter volumes. Units offer real-time display of all leak test stages and data storage in buffer for up to 1,000 test records. Embedded web pages allow managers to monitor and access operations remotely, including interactive test parameter updates.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Leak Detectors

Miniature Passive Probes have bandwidths from DC to 1.5 GHz.

info@productnews.com (ThomasNet News) — Mon, 06 Jul 2009 08:34:10 -0500

Suited for probing densely populated IC components or surface-mount devices used in high-speed digital applications, N2870A series is available with attenuation ratios of 1:1, 10:1, 20:1, and 100:1 and bandwidths of DC to 35, 200, 350, 500 MHz and 1.5 GHz. Spring loaded sharp probe tip helps keep probe from slipping off device under test, while insulating IC caps keep probe tip centered on IC lead and keep it from shorting adjacent leads. Compact devices feature 2.5 mm probe head diameter.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Wafer Probes | Oscilloscope Probes