ThomasNet Industrial Newsroom -

Handheld Digital Oscilloscope has 60 MHz bandwidth.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2008 07:42:50 -0500

Featuring sampling rate of 250 MS/sec in dual channel mode, Model HOS260C can be used as digital multimeter to analyze several signals simultaneously, allowing engineers and technicians to easily tackle complex on-site systems. Handheld oscilloscope comes equipped with color LCD panel and flexible control software, which features multi-language display. Unit weighs 645 g and operates on rechargeable Li-ion batteries for up to 6 hr.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: Digital Multimeters | Digital Storage Oscilloscopes

Multifunctional Tester enables complete CCTV assessment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:55:24 -0500

Combining 7 testers into one portable device, SecuriTEST PRO allows one technician to verify and troubleshoot complete CCTV system. Video and sync testing assures each camera is set to its correct video output level, built-in digital multimeter is included for testing electrical signals, and audio input enables audible assessment via integral speakers or 2.5 in. color LCD. Tester supports 20+ PTZ camera protocols and can wire map UTP cables as well as generate video test patterns.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Data Communication Testers | Digital Multimeters

Meter provides RF radiation safety tests to 60 GHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:52 -0500

Designed for broadband measurement of electromagnetic energy, hand-held Model NBM-520 works with calibrated probes covering frequencies from 100 kHz to 60 GHz. Probe types include electric and magnetic field, flat or shaped response, and diode and thermocouple detectors. With supplied software, user can pre-configure meter for specific survey task and manage data required for survey reports. Meter can be employed by safety personnel to evaluate compliance of facilities with IEEE standards.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Electromagnetic Field Meters | Measurement & Test Systems

Hand-Held RF Field Strength Meter is battery operated.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:07 -0500

Measuring 4 x 1.8 x 9 in. and weighing less than 2.0 lb, Model 2640 features frequency range of 100 kHz to 2,000 MHz, noise floor of -110 dBm to detect weak signals, and basic spectrum analyzer functionality. It has 2 GHz frequency counter, phase-locked loop for precise frequency tuning, detachable antenna, and back-lit display. Meter supports RS-232C serial communication, detects wide band and narrow band FM, AM, and SSB signals, and scans and displays up to 160 channels.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: RF Watt Meters | Field Strength Meters | Electric Meters

Clamp Meters provide True RMS measurements.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:56 -0500

Including Models EX612, EX613, EX622, and EX623, EX600 Series True RMS Clamp Meters feature IR thermometer for locating hot spots and NCV and dual thermocouple inputs for T1, T2, and T1-T2 differential temperature measurement. With 1.4 in. jaw opening for conductors up to 500 MCM, units provide 40,000 count clamp meter functions for dc voltage, resistance, capacitance and frequency, and can measure motor capacitors to 40,000 µF. Models EX613 and EX623 also provide dc current function.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: AC Line Voltage Meters | Frequency Electric Meters | Thermocouple Meters | Electric Current Indicators | Temperature Indicators | Capacitance Meters

Dispensing System handles thixotropic and cohesive materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:54 -0500

Incorporating Servo-Flo design of positive rod displacement precision metering of fluids in lightweight unit, Servo-Flo® 401 Series servo-motor drive meter system is designed to apply small precision beads and precisely metered shots of 1-part adhesives, sealants, or lubricant materials from 1-8.5 cc in robotic and manual dispensing applications. It accepts flow-rate commands from automation controls or can be preset to vary flow rate during dispensing.

This story is related to the following:
Test and Measuring Instruments
Material Handling and Storage

Search for suppliers of: Electric Meters | Adhesive Dispensing Systems | Adhesive Applicators | Sealant Applicators | Epoxy Dispensers | Dispensing & Metering Systems | Adhesives Dispensers | Sealant Dispensers

Universal Multimeter comes with RS232 PC interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:25 -0500

Including front keypad for input and speech mode selections as well as volume control, OMEGASAYS® UV1000 measures 0-10 Vdc voltage, 0-20 mA current, and Type K thermocouple inputs, and verbalizes them in any range with over 100 built-in engineering units. Battery powered and CE compliant unit can be configured for input range, engineering units, and high/low alarm set points. Multimeter is suited for chemical, automotive, HVAC, and paper industries.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electric Current Meters | High Voltage Meters | Thermocouple Meters | Multimeters

Optical Power Multi Meter offers ±5% accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:24 -0500

With 800-1,600 nm wavelength range, Model GAO801 Optical Power Multi Meter performs absolute power test in units of dBm or W, relative power test in units of dB, as well as loop and auto bi-directional test. InGaAs detector features -45 to +25 dBm optical power test range, 0.1% linearity display, and 0.01 dBm logarithm display. Powered by 9 V/160 mAh battery, it has memory capacity of 50 data items, high contrast backlit display, and adapters supporting FC, ST, and SC ports.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Multimeters | Optical Instruments | Power Meters

USB Digital Multimeter is designed for portable applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:21 -0500

Weighing 8 oz and measuring 5 x 7 x 1.3 in., Model SMU2055 6½-digit multimeter is powered directly from USB connection and consumes only 1.5 W. It operates at up to 250 readings/sec and can measure 4 ranges of of both ac and dc Volts and current, 6 ranges of 2- and 4-wire ohms, and diode test at 4 user selectable currents from 1 µA to 1 mA. Plug-and-play software installation is compatible with wide range of software packages.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Digital Multimeters

AC Ammeters feature built-in current transformers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:06:55 -0500

Available in 5 models, ACA-20RM Series provides direct measurement of true-RMS values of non-sinusoidal ac currents from 2-50 A. Self-powered, single-board modules offer choice of either 120 or 220 V nominal operation. Consuming less than 50 mA and operating from 0-60°C, meters include red LED displays with 0.37 in. high characters, precision auto-zeroing circuitry, RMS-to-DC converter circuit, and built-in bezel/filter assembly with metal fasteners.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Ammeters

Multimeter enables basic meter set and reconnect testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Apr 2008 07:55:19 -0500

Fluke 113 Utility Multimeter includes VCHEK(TM) LoZ low impedance measurement function that allows users to simultaneously test for voltage or continuity. Min/Max function lets operator record signal fluctuation. Device can also perform diode tests and provides both auto and manual ranging capabilities. It is compliant with CAT III 600 V and CAT IV 300 V standards and includes backlit display, holster with probe holders, TL75 test leads, and 9 V battery.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Multimeters | Electric Current Meters

Meter Cabinet monitors power in vertically stacked design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:41:01 -0500

PowerLogic® High-Density Metering cabinet is 4 meter system with accuracy verified to ANSI C12.20. 0.5 Accuracy Class or ANSI C12.16. 1.0 Accuracy Class. Featuring tamper-resistant design, unit is available in Type 1 (indoor) and Type 3R (outdoor) forms and can be specified for single- and 3-phase power systems. In conjunction with PowerLogic Tenant Metering Commercial Edition software, it offers end-to-end cost allocation and sub-billing solution.

This story is related to the following:
Material Handling and Storage
Test and Measuring Instruments

Search for suppliers of: Electronic Cabinets | Electric Meters

Panel Meter features outputs with dual setpoint capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Mar 2008 07:41:55 -0500

Incorporating 2 Form C relays capable of switching up to 5 A, PAXLA panel meter can accept dc current/voltage or process input signals, scaling them to desired readout for wide range of applications. It delivers bright 5 digit, 0.56 in. high red LED display with programmable scaling and decimal points, and also offers universal power supply, accepting 50-250 Vac or 21.6-250 Vdc. Unit meets CE requirements and comes with NEMA 4X/IP65 sealed front bezel.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Panel Meters

Electricity Meter monitors European energy usage.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Mar 2008 07:37:49 -0500

Based on ZigBee wireless technology, plogg smart meter and data logger plug-in electricity meter can be attached to any appliance or device that uses standard UK 13 A or European 16 A plug. It utilizes EM250 ZigBee transceiver and EmberZNet PRO wireless mesh networking software running on Telegesis module. Real-time clock function is also included and meter samples voltage and current signals 50x/AC cycle at sampling rate of 2,520 Hz.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electric Meters | Data Loggers & Data Logging Equipment

Multiparameter Testers fit in a pocket.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Mar 2008 07:38:58 -0500

Suited for water, wastewater, laboratory, and plant use, OAKTON waterproof multiparameter Testr(TM) 35-Series meters measure pH, conductivity, TDS, salinity, and temperature. Units have long-life pH electrodes and stainless steel conductivity sensors for wide range of sample compatibility. Adjustable temperature coefficient feature helps measure conductivity or TDS accurately at varying temperatures, while Auto-ranging feature handles applications across broad measurement ranges.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Conductivity Meters | pH Meters | Temperature Meters | Salinity Sensors

Clamp-On Ultrasonic Flowmeter suits large pipe applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Mar 2008 07:46:18 -0500

Intended for heavy industrial and hazardous environments, OPTISONIC 6300 covers entire pipe diameter range from ½-160 in. It includes integrated display that allows signal quality to be shown in real-time during calibration of signal transducer. Protective casing withstands everything from aggressive vapor and dust to mechanical damage and solar radiation. Casing also helps minimize maintenance by protecting grease that allows signal transducer to cling to tube wall.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Flowmeters | Ultrasonic Flowmeters | Clamp-On Meters

Eddy Current Tester delivers multimodal operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Feb 2008 07:51:23 -0500

MultiMac(TM) operates with encircling/sector test coils for detecting short-surface defects and/or rotary test probes for identifying long, seam-type surface defects. Test Screen displays single channel, and Multi-Screen provides simultaneous display of 1-8 channels. Each channel can be individually configured with different frequencies and channel modes. Along with end-suppression circuitry, systems offer recording capability and remote access via in-plant network or Internet.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Eddy Current Testers

Digital Multimeters troubleshoot hydraulic systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Feb 2008 07:41:51 -0500

Available in 2 models with peak pressure rating of 8,700 psi and flow range of 105 or 210 gpm, DHM 3 Series can pinpoint faulty hydraulic components causing poor system performance. Units measure flow, pressure, peak pressure, temperature, horsepower, and volumetric efficiency. Housed in protective steel case, meters include loading valve with built-in over-pressure protection. Readings are displayed on LCD with user contrast control for indoor or outdoor viewing.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: Digital Multimeters

Digital Panel Meter is designed for accuracy, visibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Dec 2007 07:50:22 -0500

Supplied in protective metal casing, Series DPMX has 3½-digit display - available with 2.3 in. LED segments in red, green, or blue - that can be viewed from across room or in dark areas. Features include 90-250 Vac universal power supply, user-selectable process inputs, and mounting bracket that can be adjusted up to 180°. Suited for most types of process measurement applications, unit offers accuracy of ±1% FS + 1 count and sampling rate of 3 readings/sec.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Panel Meters

Digital Multimeter features 5.5 digit resolution.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:30 -0500

Suited for broad range of applications, Fluke 8808A Digital Multimeter comes with dual display that enables users to measure 2 different but related parameters simultaneously. It uses high impedance input measurement circuit to take low current measurements of less than 2,000 µA with resolution of up to 100 nA, without loading circuit under test. Unit offers 2 x 4 ohms function that uses split terminal jacks, allowing users to perform 4-wire measurements using 2 leads instead of 4.

This story is related to the following:
Test and Measuring Instruments