ThomasNet Industrial Newsroom -

Cellular Wireless Hour Meter includes idle sensing feature.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:13 -0500

In addition to location and total hours of usage, CYBERWATCH can also report idle time, which is calculated by amount of time engine is under load versus total time engine is on. Unit transmits GPS position and hour meter data automatically once per day via cellular network to password protected website that is accessed by dealer or user. To ensure timely service, graphic interface shows mechanic dispatcher which vehicles are due, past due, and not due for maintenance.

This story is related to the following:
Test and Measuring Instruments
Display and Presentation Equipment

Search for suppliers of: Hourmeters | LCD Hour Meters

Multijet Water Meter features pulse output.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:06 -0500

Series WMT multijet water meter with pulse output can handle wide flow ranges in low-flow commercial/industrial applications. Unit includes magnetically driven, hermetically sealed resistor, separated from register system and water, that will not leak or fog. Reed switch is activated via magnet on dial. Output, suitable for remote monitoring of flow rate or flow, can interface with PLC's, counters, data loggers, and SCADA systems.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Water Meters | Pulse Meters

Dual Gauge prevents deep battery discharge.

info@productnews.com (ThomasNet News) — Fri, 07 Aug 2009 08:37:17 -0500

By preventing battery from dipping below specified state of charge, Battery Discharge Indicator and Hour Meter Dual Gauge helps optimize battery life. Lockout gauge version uses internal relay to shutdown battery, while lift-lockout version allows lift equipment to cycle down to bottom of range before locking out of battery. Both fully sealed units prevent operator from continuing to use equipment once battery reaches OEM-specified state of charge.

This story is related to the following:
Test and Measuring Instruments
Display and Presentation Equipment

Search for suppliers of: Battery Discharge Indicators | LCD Hour Meters | Hourmeters

Water Meters suit commercial and industrial applications.

info@productnews.com (ThomasNet News) — Thu, 30 Jul 2009 08:33:27 -0500

Series WM Multi-Jet Water Meters feature multijet design that enables accuracy over wide flow ranges, even in low flow applications. Units incorporate magnetically driven, hermetically sealed resistor that will not leak or fog and is completely separated from register system and water. Meters are designed for longevity and maintenance-free operation.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Water Meters

Water Metering Technology delivers accuracy at all flow rates.

info@productnews.com (ThomasNet News) — Mon, 29 Jun 2009 08:33:42 -0500

Available in 5/8, ¾, and 1 in. sizes, iPERL continuously measures water as it flows through magnetic field. Speed of water is used to create and transmit signal, allowing all intermittent usage to be captured - regardless of flow intensity. Constructed without any moving parts, technology also lends to high-flow durability and minimal wear/maintenance requirements. Intelligent water management system is 100% Pb-free and complies with AB1953 and ANSI/NSF Standard 61.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Water Meters

Water Meters are available with range of coupling options.

info@productnews.com (ThomasNet News) — Mon, 19 Jan 2009 08:42:12 -0500

Suited for municipal and industrial applications, CLXCD single jet totalizing water meters are available in ½ and ¾ in. sizes, with or without Reed Switch output every 10 gal. They are offered in hot water and cold water versions for fluid temperatures to 194 and 122°F, respectively.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Water Meters

Quartz Hour Meters are waterproof and tamper-resistant.

info@productnews.com (ThomasNet News) — Wed, 29 Oct 2008 07:47:00 -0500

Designed for commercial grade to precision industrial equipment, Electromechanical Quartz Hour Meters include Cramer 638 Series DC meter, which sustains operating voltage range of 10-80 Vdc, and Cramer 637 Series AC Meter, which operates from 90-264 Vac, 50/60 Hz. Both units are 100% sealed and RoHS-compliant and are suited for monitoring in-service and processing time of equipment.

This story is related to the following:
Timers and Clocks
Test and Measuring Instruments

Search for suppliers of: Electromechanical Timers | Hourmeters | Analog Hour Meters

Timing Boards support PCI bus specification 3.0.

info@productnews.com (ThomasNet News) — Wed, 13 Aug 2008 07:43:39 -0500

Suited for ultra low latency computer architectures, TPRO-PCI-66U and TSAT-PCI-66U bus-level timing boards offer zero latency time reads of precise time stamps. Model TPRO-PCI-66U synchronizes to master clock through IRIG and other time codes, while TSAT-PCI-66U uses GPS satellite system to synchronize to coordinated universal time without need of any local source of official time. PCI-X compliant boards run at 66 MHz bus speed with 32-bit data interface.

This story is related to the following:
Computer Hardware and Peripherals
Display and Presentation Equipment
Test and Measuring Instruments

Search for suppliers of: Timing Devices | Time Study Boards | PCI Data Acquisition Boards

Electromechanical Hour Meters have totally sealed housings.

info@productnews.com (ThomasNet News) — Fri, 20 Jun 2008 07:38:30 -0500

Offered in variety of totally sealed SAE and NEMA 4X, 12 compliant housings in both ac and dc voltages, Models 722/732 Electromechanical Hour Meters operate in any environment. Rugged unit is suited for use in variety of industrial ac/dc applications, such as control panels, generators, and outdoor power equipment.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hourmeters | Electromechanical Counters

Timing Solutions meet PCIe Gen2 specification.

info@productnews.com (ThomasNet News) — Tue, 27 May 2008 07:18:53 -0500

Offering 2 psec rms phase jitter performance, 9FG104D generator can be driven with either 14.318 MHz or 25 MHz crystal to provide 4 PCIe Gen2 reference clocks. Additionally, 8 output version, Model 9FG108D, is available for larger applications. Both devices are are configurable through hardware pins or through SMBus interface and offer both spread-spectrum and non spread-spectrum options. Versions that withstand -40° to 85°C industrial temperature range are also offered.

This story is related to the following:
Test and Measuring Instruments

Timing-Card IC supports SONET/SDH and/or Synch-E Ports.

info@productnews.com (ThomasNet News) — Mon, 19 May 2008 07:38:53 -0500

Built on DSP-based, digital PLL technology, Model DS3102 offers carrier-class, Stratum 3 clock synchronization for G.8262-compliant synchronous Ethernet (Sync-E) equipment. It can lock to any multiple of 2 kHz up to 131.072 MHz and any multiple of 4 kHz up to 155.52 MHz, and can generate any multiple of 2 kHz up to 77.76 MHz, any multiple of 8 kHz up to 311.04 MHz, and any multiple of 10 kHz up to 388.79 MHz. Unit is designed for central clock-synchronization function in telecom systems.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Integrated Circuits (IC)

Precision Timing GPS Module only requires one satellite.

info@productnews.com (ThomasNet News) — Mon, 07 Apr 2008 07:39:49 -0500

Capable of (compensated) time pulse accuracy of up to 15 ns, LEA-5T offers Time Mode function whereby GPS receiver assumes stationary position that can be programmed manually or determined by initial self-survey. Stationary operation enables GPS timing with only one visible satellite and eliminates timing errors. Along with SuperSense KickStart weak signal acquisition technologies, module incorporates time mark and counter unit for globally synchronized time stamping/measuring.

This story is related to the following:
Test and Measuring Instruments
Timers and Clocks
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Timing Distribution Systems | Process Timing & Signaling Instruments | Global Positioning Systems (GPS) | Timing Devices

Wireless Hour Meter produces idle/work logs.

info@productnews.com (ThomasNet News) — Thu, 17 Jan 2008 07:31:37 -0500

Designed to identify and minimize engine idle time, ST-550 Server Tracker uses radio frequency to transmit wireless, paperless, and hands-free data, such as equipment's hour meter, idle logs, work logs, and service alerts for preventive maintenance. Data is captured passively via drive-by activity and can be integrated into back office systems. Reporting feature updates management information nightly, and automatically generates summary and alert email for timely decisions.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hourmeters

FPGA-Based Network Timing Solution supports customization.

info@productnews.com (ThomasNet News) — Fri, 28 Dec 2007 07:27:14 -0500

Implemented using Xilinx® Virtex(TM) or Spartan(TM) FPGA, carrier-class solution is delivered as 2 IP cores (NGNTime and FemtoTime) that are fully interoperable with NTP and provide migration path for Version 2 of IEEE 1588 or PTP. This provides designers of next-generation wired/wireless communication networks with embedded programmable timing solution that supports field upgradeability and customization. Solution provides accurate, end-to-end timing across entire network.

This story is related to the following:
Test and Measuring Instruments
Mechanical Components and Assemblies

Search for suppliers of: Central Processing Unit (CPU), Intellectual Property (IP), Microprocessor & Processor Cores | Timing Devices

Hour Meter/Tachometer features 1-wire connection.

info@productnews.com (ThomasNet News) — Fri, 09 Nov 2007 07:41:26 -0500

Utilizing inductive technology, Hour Meter/Tachometer eliminates complex, multi-wire hookups. One end of wire wraps around spark plug wire and other end is secured into channel on meter. Hour meter displays up to 9,999.9 hours in 1/10 hour intervals or 99,999 hours in 1 hour intervals, while tachometer gives rpm accurately down to resolution of 10 rpm. With Flash Alert(TM), programmable alarms can alert operator as to type of maintenance required.

This story is related to the following:
Test and Measuring Instruments
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Automotive Tachometers

Remote Hour Meter stops unnecessary preventive maintenance.

info@productnews.com (ThomasNet News) — Fri, 26 Oct 2007 07:43:54 -0500

Remote hour meter reading device remotely acquires and automatically tracks lift truck run time, saving time and effort otherwise spent on maintenance and manual product checks. Offered as lift truck add-on, solution links to customizable digital paging network that lets operators select specific time for device to submit truck runtime data. LiftTraks(TM) web-based software lets managers use network's grouping capability to view entire fleet or specific units based on specific settings.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hourmeters

Dual Gauge offers multiple display options.

info@productnews.com (ThomasNet News) — Fri, 12 Oct 2007 07:47:20 -0500

Designed to save space, Dual Gauge incorporates variety of gauges in top and bottom window. Top LED bar can be programmed to monitor battery status, liquid fuel level, temperature range, or volts, while bottom window consists of hour meter with optional Flash Alert programmable service alarms. Hour meter can count to 9,999.9 hours with 1/10 hour resolution or to 99,999 hours with 1 hour resolution. Epoxy filled, gauge is waterproof as well as vibration and shock resistant.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Fuel Gages | Battery Meters | Hourmeters

LCD Hour Meters feature mercury-free design.

info@productnews.com (ThomasNet News) — Wed, 12 Sep 2007 07:53:48 -0500

Measuring 1.82 x 0.60 x 0.38 in., Series T47 features 5-digit, 3.8 mm LCD display and operates from 100-250 Vac, 50/60 Hz. Miniature units include internal memory and utilize battery to maintain memory when not in use. All components are RoHS compliant.

This story is related to the following:
Display and Presentation Equipment
Test and Measuring Instruments

Search for suppliers of: LCD Hour Meters

Water Meters feature 30+ year battery life.

info@productnews.com (ThomasNet News) — Thu, 06 Sep 2007 07:46:53 -0500

Offered in 20 and 30 gpm versions, SmartMeter(TM) SM700 is available with replaceable battery that extends meter's operational life. Products utilize fluidic oscillation technology, have no moving parts, and are unaffected by grit and particulates. Integrated functions are provided to monitor leakage, supply data, and prevent meter tampering. Offering various data output formats, meters also deliver warning indication 12 months prior to battery expiration.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Water Meters

Electronic Meter features maintenance indicator.

info@productnews.com (ThomasNet News) — Wed, 18 Jul 2007 07:43:33 -0500

LCD Maintenance/Hour Meter has 50 hr maintenance meter and internal battery to power digital display, making it viewable even when it is not accumulating hours. Providing snap-in installation, meter fits into rectangular panel opening and mounts using self-contained clips. Integral terminal connector reduces line errors due to polarity issues. Applications include commercial sprayers, small-engine vehicles, portable generators, and welders.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hourmeters | Maintenance Meters