ThomasNet Industrial Newsroom -

Water/Wastewater Test Kit determines iron concentrations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:49 -0500

Able to produce results within 3 min, WaterWorks(TM) Total Iron detects ferric as well as ferrous forms of iron without requiring meter. User adds contents of one iron powder pillow to supplied vial, fills vial with water sample, closes vial with screw cap, and shakes sample for 20 sec. Product meets National Secondary Drinking Water Regulations, set forth by USEPA, which recommend iron level of no more than 0.3 ppm. Detection levels for this visual test are 0, 0.3, 0.5, 1, 3, and 5 ppm.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Percent Concentration | Water Testing Kits

Portable Dissolved Oxygen Meter is microprocessor-based.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:35:15 -0500

Model DOH-20D features digital LCD screen that can show dissolved oxygen (DO) in either mg/liter or percent of saturation and temperature simultaneously. Featuring memory storage and recall with data hold function, unit can store up to 16 sets of temperature and DO values. Device has low-battery and consumption indicators, and comes complete with sensor, 2 membrane caps, 20 mL of electrolyte, pipette, rubber protective cover, 9 V battery, and operator's manual.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Dissolved Oxygen Meters

Dissolved Oxygen System features single-use design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:14 -0500

Consisting of disposable sheath, optical reader, and transmitter, TruFluor(TM) provides in-situ measurement of dissolved oxygen. Sheath can be pre-inserted in disposable bioreactor bag port, and irradiated with bag to preserve and guarantee sterile barrier. All wetted materials of sheath are USP class VI compliant. Optimizing reliability of sensor, transmitter enables automatic entry of calibration and traceability data using RFID, diagnostics, and verification.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Dissolved Oxygen Transmitters | Dissolved Oxygen Sensors | Dissolved Oxygen Measuring Instruments | Dissolved Oxygen Meters | Dissolved Oxygen Analyzers

Multiplexer performs automated soil CO2 studies.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Jul 2006 08:08:28 -0500

Available in 8- or 16-port configurations, LI-8150 Multiplexer is capable of assessing spatial and temporal variability in CO2 flux. It allows up to 16 chambers to be controlled by single LI-8100 Analyzer Control Unit, which can monitor total coverage area of up to 30 m dia. Weatherproof case protects internal solenoid valves, control electronics, LED indicator panel, and filter assemblies. Flash memory or Compact Flash cards can be used for storing readings.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Carbon Dioxide Analyzers | Gas Testing Meters | Gas Analyzers | Multiplexers

Portable Instrument continuously measures up to 5 gases.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Feb 2005 08:30:17 -0500

Model X-am 7000 can be fitted with 3 electrochemical and 2 IR optical or catalytic sensors to simultaneously measure up to 5 gases. Available with choice of 25+ sensors, product is capable of detecting 100+ gases and vapors. Instrument features IP67 ingress protection and leak detection mode with ppm bar graph. Intelligent sensors feature EEPROM that stores information pertaining to gas identification, alarm functions, measurement data.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Gas Testing Meters

Dissolved Oxygen Meter is self-cleaning and self-calibrating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Oct 2003 08:16:17 -0500

Aztecâ"¢ Series 5000 automated aeration basin monitoring system for wastewater treatment plants provides dissolved oxygen and mixed liquor suspended solids control. It features built-in data logging and remote communications and is capable of single, dual, or combined measurements. Unit incorporates pneumatic cylinder and shroud assembly for in-situ cleaning and calibration, and replaceable cell that does not require electrolyte or membrane replacement.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Dissolved Oxygen Meters

Suspended Solids Meter uses non-hazardous ultrasound.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2003 07:42:27 -0500

Model 502 can replace nuclear type density meters. It provides LCD local readout of percent solids, 4-20 mA output, two set-point relays, and RS-232/485 serial port. Sonic transducers fit flush with pipe wall, eliminating intrusions into flow, which avoids fouling with stringy sewage sludge. Microprocessor is housed in NEMA 4X enclosure and features diagnostics, pushbutton calibration and dynamic damping.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Suspended Solids Meters

Probe provides BOD analysis.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Feb 2003 07:49:25 -0500

Dissolved Oxygen AUTO-STIR Probe works with Model 862A DO/BOD/Temperature Meter. Built-in stirrer provides vigorous sample agitation preventing oxygen stratification. Free standing probe stand functions as air calibration beaker and can store probe when not in use. Probe includes one-touch control, dual automatic temperature compensation, and low maintenance polarographic design.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Probes | Dissolved Oxygen Meters

Probe utilizes multi-beam technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Dec 2002 07:40:32 -0500

ZÃ¼llig COSMOS-25 provides suspended solids measurements. Able to be used in open channels or basins and pipelines, its multi-beam technology renders product less vulnerable to measurement discrepancies.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Probes | Suspended Solids Meters

Ph/Ion Meter suits GLP-compliant research laboratories.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Jun 2002 08:31:53 -0500

OAKTON pH/Ion 2100 meter handles pH, ion concentration, mV, and temperature measurements. It features selectable 0.001/0.01 pH resolution with Â±0.002/0.01 pH accuracy. Real-time clock marks calibration and stored data with date and time stamps. Users can calibrate pH and conductivity to up to five points and define schedules for recalibration. Nonvolatile memory stores up to 50 data sets, and meter's RS-232 output sends readings to printer or PC.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Conductivity Meters | Temperature Meters | pH Meters

Dissolved Oxygen Meter features self-stirring probe.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Apr 2002 09:56:20 -0500

Waterproof WTW 340i Series is available in field/lab sets that allow meter to be used for field dissolved oxygen (DO) and lab biological oxygen demand (BOD) measurements. Unit comes with field probe and StirrOx(R) self-stirring BOD probe. Probes can be interchanged and used immediately with no warm-up period required. Meter has automatic calibration, LCD display, real-time clock, RS232 interface, data logger, and 3 yr warranty.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Dissolved Oxygen Meters

Dissolved Oxygen Meter uses polarigraphic type probe.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Feb 2002 07:54:51 -0500

LCD digital meter is designed to measure dissolved oxygen in field or laboratory with DO accuracy of Â±1.5% full scale and temperature accuracy of Â±1% full scale. O2 measurement range is 0.00 to 19.00 PPM, and temperature range is 0.0Â° to 50.0Â°C. Both are displayed on 3.5 digit LCD readout with 1/2 in. high numerals. Meter includes automatic temperature compensation over range of 0Â° to 30Â°C. It uses 9V battery for 100 hrs continuous service.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Dissolved Oxygen Meters