ThomasNet Industrial Newsroom -

Air Flow Sensor comes with integrated dual color display.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2008 07:43:40 -0500

Available in 3 port sizes with total of 8 flow rate ranges of 0.5-1,000 Lpm, FM-200 Series is bi-directional digital flow sensor for use with air or Nitrogen gas that offers high precision detection of 3% F.S. Unit utilizes 2 temperature sensors, one on each side of a heater element, to determine heat distribution, providing accurate detection, regardless of flow direction. It has ability to display real time flow rate of any process and can function as a flow meter.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Digital Sensors | Air Flow Sensors | Digital Meters | Flow Sensors

Tunnel measures passive airflow volume in micro range.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:36:48 -0500

Cambridge AccuSense MicroFlow Tunnel provides accurate and repeatable airflow volume measurements from 0.60-6.00 scfm through densely populated electronics packaging. Suited for design engineers, device can be used to validate air flow through phones, laptops, portable medical diagnostic equipment, or other small electronic devices, and provides accurate way to measure micro air volumes typical of passive airflow cooling and ensures thermal reliability of these devices.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Air Flow Measurement Instruments

Flow Sensor handles temperatures up to 350°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:31 -0500

Offering measuring range of 0.2-20 m/sec, Model SS 20.60 HT provides digital and analog output and uses status indicator to display information about current flow velocity. Modular design enables sensor to be supplied with field bus interface. Able to measure free air and guided air in ducts from 25-1.000 mm, sensor is suited for mass flow control of combustion processes, burner control, flow measurement of process gases, and volume flow measurement of test stands.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors | Air Flow Sensors

Thermal Flow Sensor can withstand explosive environment.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Apr 2008 07:44:53 -0500

Featuring 9 mm SS tube, SS 23.400 ATEX3 Thermal Flow Sensor can measure flow velocity and detect direction of clean air and gas flow. It offers atmospheric pressure range of 700-1,300 hPa and power supply range of 12-24 Vdc. Including 2 switching outputs to indicate flow direction and limit value, microcontroller based unit provides serial interface that allows on-site programming via PC and adaptation of response time, threshold, and switching polarity to operation requirements.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors | Gas Sensors | Thermal Sensors

MEMS Flow Sensor suits HVAC air handling equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jan 2008 07:28:28 -0500

Model D6F-P MEMS Flow Sensor incorporates cyclone-type dust segregation system with bidirectional flow paths that generate cyclonic flows to separate dust particles from air using centrifugal forces. It offers flow range of +1.0 SLM, pressure range of +0.84 in. H<sub>2</sub>O, and output signal range of analog 0.5-2.5 Vdc, with 0-0.5 Vdc indicating negative flow. Measuring 17 x 37 x 27 mm, unit is available in PCB mountable and connector models.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors

Air and Gas Flow Sensor has 200 m/s measuring range.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Jan 2007 07:55:12 -0500

Featuring 1:1,000 turn-down ratio, SS 20.60 immersion-style sensor incorporates media-resistant sensor tip and modular design that allows for selection of analog, Profibus-DP, or Device-Net interface. Calibration accuracy is 1% of measuring value, and max operating pressure is 230 psig. Compact sensor with attached transformer measures air, nitrogen, CO2, and other gases and can be used in 1-40 in. tubes.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors | Air Flow Sensors

Candlestick Sensor measures temperature and air velocity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Dec 2005 07:08:26 -0500

Designed to characterize thermal conditions in electronic systems, Model MS 1000-CS-WC provides temperature measurements from -30 to +150°C, ±1°C and velocity measurements from 0-51 m/s, ±2%. Unit features 9.5 mm diameter base and comes in heights of 9, 12, and 20 mm. Narrow, low-profile design minimizes disturbance of heat flow in test domain, while plastic-sleeved stem facilitates installation and repositioning during testing process.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Velocimeters | Velocity Sensors | Temperature Sensors | Air Flow Sensors

Board provides air flow and temperature measurement.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Nov 2005 07:15:36 -0500

Compact ISD-232(TM) board directly and simultaneously assesses air flow from 0-50 m/sec and temperatures from -30 to +150°C in computer feedback control and measurement systems using independent, mobile sensors that can be placed anywhere in test domain. Measuring 3.34 x 1.44 x 0.55 inch, board may be used to control devices such as laboratory wind tunnels and HVAC regulators or to provide read-out data for display systems. LabVIEW(TM) software is available.

This story is related to the following:
Computer Hardware and Peripherals
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Test and Measuring Instruments

Search for suppliers of: Temperature Measurement Equipment | Data Acquisition Boards | Computer Boards | Air Flow Measurement Systems

Air Flow Monitors are suited for dirty air streams.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Jun 2005 00:00:00 -0500

With no orifices or thermal elements to clog, AF 100 Series measures air flow/velocity in high-particulate processes and stacks. Abrasion-proof probes are available for pipes and ducts, while non-intrusive ring sensors are available for tubing. Combining time-of-flight/cross correlation principle with charge induction and current measurement techniques, monitors are suited for process pipes, injection lines, dryers, cyclones, precipitators, and baghouses.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors | Air Flow Measuring Probes

Compressed Air Sensor monitors air consumption.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Apr 2005 07:44:53 -0500

Used to continuously monitor compressed air systems, efector Metris divides plant into zones based on number of fittings and potential leakage points in any area. Sensor can be mounted in supply pipe to monitor one machine or in plant zone to monitor several machines, sensing compressed air levels when equipment is on or off. Micro DC, PNP sensor models SD6001 and SD8001 have respective measuring ranges of 0-44 and 0-132 scfm.

This story is related to the following:
Test and Measuring Instruments
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Flow Sensors | Leak Sensors | Compressed Air Management Systems

Airflow Sensor provides digital TTL output.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Jan 2005 08:03:43 -0500

Utilizing thermistor technology, AccuSense F900 measures airflow temperature and velocity from 30-200 fpm to 30-2,000 fpm, depending on calibration. Product, resistant to mechanical shock and vibration, is available with temperature compensation settings of ±5% of reading from 10-35°C and ±10% of reading from 10-60°C. With supply voltage of 7-13 Vdc, series has linear 0-4 V output or digital output for direct control of airflow environment.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors

Air Flow Sensor provides pressure mapping.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 31 Oct 2003 07:36:17 -0500

Tactilus Surface Air Flow Sensor contains 1-dimensional array of 16 pressure sensing elements. Capacitance-based design provides sensitivity for positive and negative pressures. Multiple strips can be connected to same interface to allow hundreds of data points to be collected. Model TAF-1000 is suited for measurement on flat surfaces, while Model TAF-2000 is flexible for curved surfaces. Model TAF-1500 is for rheology and fluid mechanics applications.

This story is related to the following:
Test and Measuring Instruments
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Pressure Sensors | Air Flow Sensors

Gauge helps meet NOx emissions regulations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Jan 2003 07:43:23 -0500

Model 130-PC indicates flow of ammonia-air mixture in selective catalytic reduction systems. It also monitors ammonia filter prior to injection into vaporizer. Applications include simple cycle gas turbine facilities, combined gas turbine/steam turbine facilities, and conventional fossil fuel fired plants.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Gages | Ammonia Monitors

Air Flow Sensor protects hysteresis dynamometer.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Jun 2002 08:52:23 -0500

Air flow sensor for company's Hysteresis Dynamometers provides protection against operator error. When sensor is used with company's DSP6001 Dynamometer Controller, it does not allow dynamometer brake to be energized until blower or air supply has been turned on. Air flow sensors can be retrofitted to company's ED-715 and 815, HD-510, 710, 715 and any HD-800 Series dynamometers.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors

Air Data Boom includes total air temperature sensor.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Apr 2002 07:52:10 -0500

Model 100900 heated, 4-vane air data boom provides supersonic data collection of angle of attack, angle of sideslip, static pressure, total (pitot) pressure, and total air temperature. Based on heated probe wind-tunnel tested to Mach 1.3, boom is constructed from machined aluminum, stainless steel, and copper alloys. Probe is 28 Vdc powered at 145 A, and meets requirements of MIL-T-5420B and SAE AS 393.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Aircraft Accessories, Parts & Supplies | Air Flow Sensors | Temperature Sensors