ThomasNet Industrial Newsroom -

Digital Signal Interface furthers DUT analysis capabilities.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

R&S EX-IQ-Box enables select Rohde & Schwarz instruments to analyze DUTs over digital I/Q interfaces. When equipped with this module, vector signal generators deliver realistic digital baseband signals for testing transceivers or other components. Interface also enables signal analyzers to assess digital baseband components. Adaptable to device under test (DUT), module offers set of breakout boards as well as user-selectable data rates, formats, and logic levels.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules

Interface Boards feature 4 LVDT/RVDT channels.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:34:57 -0500

Available in 2 models for use with PowerDNA Cube and PowerDNR RACKtangle chassis, DNx-AI-254 LVDT/RVDT Boards each feature 4 fully isolated LVDT/RVDT channels with independent A/D converters. Each channel offers 16-bit resolution, 0.1% accuracy, and scan rates up to 500 Hz. Boards can operate as LVDT/RVDT input interface or as simulation output device, on per channel basis. Multiple operating modes ensure compatibility with all standard sensor wiring and excitation configurations.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Boards

USB 2.0 Core Modules address embedded applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Aug 2008 07:47:41 -0500

ExtremeUSBÂ® 2.0 Core 2100 Module daughter boards enable true 480 Mbps USB 2.0 connectivity/extension over distances up to 100 m for Cat5 and up to 10 km for fibre optics. Supporting USB 2.0 and classic 1.1 host controllers without requiring additional software drivers, these SFF embedded modules let users locate USB 2.0 devices remotely from PC Host. Areas of use include embedded medical, industrial automation, and KVM applications.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Universal Serial Bus (USB) Ports | Universal Serial Bus (USB) Adapters | Interface Boards | Computer Boards

Relay Interface Modules are electromechanical.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Aug 2008 08:14:33 -0500

Featuring DIN rail mounting, coil and contact lead isolation, and voltage kick-back protection, IMRL electro-mechanical relay interface modules come in 1, 2, and 4 pole versions, each carrying maximum load of 10 A. They are available in control voltages of 5, 12, and 24 Vdc and 24, 120, and 230 Vac. Interface modules are offered with fixed relays pre-soldered to printed circuit board, relay socket only, or pluggable relays pre-installed into relay socket.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Electromechanical Relays | Custom Relays

Interface Module suits machine vision and instrument control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:19 -0500

Offering 2 Gigabit Ethernet ports with up to 1,000 Mb/s transfer speeds per port, NI 8234 features x4 PCI Express interconnect, providing up to 1 Gb/s bandwidth for real-time data streaming from single PXI Express slot. Compatible with GigE Vision camera interface for machine vision applications, NI 8234 delivers high-speed image transmission for standard cabling at distances up to 100 m. Module is also suited for LAN and LXI instrument control applications using dedicated private networks.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Ethernet Adapters

Interface Modules are 6.2 mm wide.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:05 -0500

Available with signal conditioning that acts as dead-zero to live-zero signal, IMS interface modules provide complete galvanic isolation and up to 2.5 kV for input, output, and power supply, while 1- and 2-channel modules come without signal conditioning. With analog signal transmitter that achieves 0.1% of full scale, modules are also available with 2, 3, or 4 wire connections for temperature detection using Pt-100 technology or other thermo-elements.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules

Interface Modules facilitate analog signal conversion.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Aug 2008 07:29:06 -0500

Measuring 6.2 mm wide, IMS interface modules convert current and voltage signals from wide range of applications with analog signal transmitter that achieves 0.1% of full scale. Featuring 2, 3, or 4 wire connections, modules are also available for transferring temperature signals from thermocouple, RTD, and other devices using Pt-100 technology, achieving 0.3% of full scale. Units provide complete galvanic isolation and up to 2.5 kV for input, output, and power supply.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Signal Converters | Interface Modules

Computer Interface Module offers USB and RS232c interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Aug 2008 07:28:56 -0500

Computer Interface Module, designed for Laser Microgage 2D Alignment System, can be added or removed at anytime by disconnecting interface cable. Pinpoint Capture software is included for selecting and collecting data. It lets users scale measurement readings, apply offsets, change preferred measurement units, and view readings in numerical or graphic formats. Limit settings and indicators are also available, and measurement recording can be done via continuous or trigger modes.

This story is related to the following:
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Laser Alignment Systems

HMI Device is optimized for connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Aug 2008 07:54:02 -0500

Featuring TFT XGA display and touch-screen, TS8015 is 15 in. operator interface panel that offers 4 RS232/422/485 communication ports and one Ethernet 10/100 Base-TX port. It also includes USB port and DSI8000 software for accelerated downloads of configuration files as well as access to trending and data logging. While data can be collected and stored on standard CompactFlash card, built-in web server and FTP server/client facilitate remote communications.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Operator Interface Terminals | Interface Modules

Interface Boards deliver high-end printer features.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Aug 2008 07:54:02 -0500

Compatible with Fujitsu 2, 3, and 4 in. 5 V thermal printer mechanisms, FTP-628DSL600 series lends support for thermal print speeds up to 80 mm/sec, USB 2.0 and high-speed (460 kbps) RS232-C serial connectivity, as well as OCR extended numeric characters. Boards measure 2.73 x 2.05 in., incorporate flash memory and near-end detection, and have 4.2-8.5 V head/motor operating voltage range. User-programmable features include multi-language fonts and bar code or image rotation.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Boards

Sensor Interface Board is compatible with H7546B MAPMT.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:52:30 -0500

Model SIB164 provides mechanical and electrical interface between Hamamatsu H7546B 64-anode photomultiplier tube (PMT) and 64 channel DAQ system. Charge signals from high-speed events are detected by PMT mounted on SIB164 and sent over specialized cables to DAQ system. When used with IQSP582 PhotoniQ system, SIB164 achieves single photon sensitivity at rates exceeding 200,000 events/sec. Board also incorporates last dynode preamplifier and 3 types of on-board pulse discriminators.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Boards

Transmitter Interface Modules provide isolation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:56 -0500

Suited for non-isolated 2-wire transmitters, 8B42 Modules supply power to current transmitter, then isolate, filter, and amplify resulting process current input signal and provide analog voltage output. Signal filtering is accomplished with 3-pole low-pass filter. Housed in miniature package measuring 1.11 x 1.65 x 0.40 in., modules operate from -40 to +85Â°C with 1,500 Vrms transformer isolation, up to 40 Vrms field-side protection, and ANSI/IEEE C37.90.1 transient protection.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules

Supplemental Ports enhance workstations, tables, carts.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 May 2008 07:41:09 -0500

Customizable pop-up data and built-in USB ports can be embedded in desktops of AFC workstations, tables, and carts to promote ergonomic workflow. Without reaching, bending, or straining, those sitting at consoles can access range of digital and electronic interfaces. Pop-up units include Ethernet network and parallel ports as well as AC/DC power outlets. Separate USB units include multiple interfaces for multi-device support. Both types help protect PC peripherals and network cables.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Universal Serial Bus (USB) Ports | Voice & Data Electronic Outlets | Convenience Outlets | Interface Modules

Sensor Interface Module includes noise filtering.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 May 2008 07:41:07 -0500

Providing 8 analog inputs, 8 digital inputs, and 8 digital outputs, 1018 PhidgetInterfaceKit 8/8/8 includes 2-stage digital input filter, which rejects noise of frequency higher than 1 kHz, eliminating false triggering. Analog inputs measure continuous quantities such as temperature, humidity, position, and pressure. Digital inputs convey state of push buttons, limit switches, and relays, while digital outputs drive LEDs, solid-state relays, and transistors.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Boards | Interface Modules | I/O Modules

Daughter Cards manage HMI and miniature motor functions.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 14 May 2008 07:48:37 -0500

Offered as plug-ins to IGLOO Icicle Kit, HMI Daughter Card and Motor Control Daughter Card provide platform-based design approach that helps designers address changing requirements, implement custom algorithms, and make design changes through device reprogramming. HMI Daughter Card demonstrates keypad control, white LED brightness control, RGB LED color mixing, and tone generation. Motor Control Daughter Card demonstrates brushless dc and stepper motor control.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: Gate Arrays | Digital Controls | Motor Controllers | Operator Interfaces | Interface Boards

Interface Board links PMT sensors to DAQ systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:52 -0500

Board model SIB064 provides mechanical interface and electrical connectivity between Hamamatsu H8500D, a 64-element multianode photomultiplier tube, and multichannel DAQ system. High bandwidth preamplier connects directly to H8500D last dynode and provides its amplified output to one of 3 on-board pulse discriminators - leading edge, constant fraction, zero slope - to directly trigger DAQ process. Discriminators can also be bypassed for timing-sensitive applications.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Interface Boards

Modules incorporate wireless connectivity into machines.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:41 -0500

Suited for M2M applications, Intelligent Dual Processor 802.11 Modules feature 802.11 device server, UART interface, 12 GPIO lines, and 2 x 10-bit ADCs. One processor runs embedded interpreter with UWScript language, providing wireless connection control and capability to auto-run user scripts. At 25 x 35 mm, it also includes WLAN drivers and TCP/IP stack. Secure WEP and WPA2 implementation as well as Bluetooth co-existence and co-location support is also included.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Wireless Modems | Local Area Network (LAN) Modems | Interface Modules

ExpressCard Interfaces are suited for avionics testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:06:45 -0500

Dual-port MIL-STD-1553 ExpressCard Interface (R15-EC), dual-port ARINC 664 ExpressCard Interface (RAF-EC), and multichannel ARINC 429 ExpressCard interface (RAR-EC) are all RoHS-compliant and used in testing critical aircraft systems. Range of configurations, available for each product, include card only, card and appropriate analyzer, and turnkey portable analyzer system with interface card, protocol analyzer, and semi-rugged laptop.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Cards | Interface Boards

M2M Module incorporates Wi-Fi technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:32:56 -0500

Featuring built-in OS and CPU, communication stack, and security protocols, W24 machine-to-machine (M2M) wireless module provides Wi-Fi connectivity for Internet and data communication. It also supports seamless Wi-Fi - cellular data routing by linking local subnet to Internet via single cellular connection. Connectivity with G24 modules enables users to leverage one design for applications requiring real-time (cellular) and broadband (Wi-Fi) communication.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Wireless Modems | Interface Modules

PMC/PCI Adapter Boards deliver carrier class performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Feb 2008 07:41:09 -0500

Offered in short card and mezzanine card form factors, OSS-wanPMC-CxT1E1 and OSS-wanPCI-CxT1E1 integrate onto host CPU PMC and PCI sites to build processing solutions addressing high-density wireless, wireline, SS7, and network convergence applications. Boards offer one, 2, or 4 front panel T1/E1/J1 ports, accessible through shielded RJ-48c connectors. Both 128-channel communications controllers offer SS7, HDLC, and transparent mode protocol support and onboard CSU/DSU functionality.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Interface Boards | Central Processing Unit (CPU) Boards | Communications Boards | Communications Controllers