ThomasNet Industrial Newsroom -

Digital I/O Boards have PCI Express form factor.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:27 -0500

PCIe-DIO24 features 24 channels of digital I/O with selectable 3.3 and 5 V logic levels. High-density PCIe-DIO96H offers 96 channels of 5 V compatible digital I/O with 64 mA sink, 15 mA source capability. Both offer software selectable pull-up and pull-down resistor configurations and ship with TracerDAQÂ®data logging, viewing, and analysis application; InstaCal(TM) installation, calibration, and test utility software; as well as programming libriaries compatible with various languages.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: I/O Boards | PCI Communication Boards | Data Acquisition Boards

EPIC Board features AMD Geode(TM) LX processor.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:21 -0500

Supporting onboard AMD Geode(TM) LX800/900 or optional LX700 processor, Model EPIC-5536 offers 200-pin DDR SODIMM and system memory up to 1 Gb for DDR 333 or 512 Mb for DDR 400. It adopts Realtek 8100C 10/100Base-TX chip that deploys two RJ-45 ports or optional RTL8110S gigabit LAN to provide flexible network connections. With power consumption of less than 10 W, unit accommodates 1 IDE, 2 SATA I with RAID 0.1 functions, and 1 Type II CompactFlash(TM) for applying to storage of old/new systems.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: I/O Boards | Single Board Computers

Isolator uses switching repeater and digital output modules.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:18 -0500

Complementing ISpac Isolator System, Type 9170 Switching Repeater and Type 9175 Digital Output modules provide safety while transferring intrinsically safe binary signals. Available in 1- or 2-channel versions, Model 9170/x0-14-12 emulates Namur signal at control system output, while Model 9175/10-1x-12 detects short circuits and wire breaks in field. Units ensure consistent error monitoring of every channel from field to control level despite isolator in between.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: Signal Isolators | I/O Modules

Ethernet I/O Modules feature built-in OPC server.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Aug 2008 07:33:50 -0500

Incorporating 16-bit, 100 MHz RISC-based processor, watchdog timer, and real time clock, Jet I/O 6500 Series DIN rail-mounted modules enable users to monitor and control I/O devices and integrate them with SCADA/HMI software applications. Equipped with one RJ-45 Ethernet port, multiple analog/digital I/O channels, as well as temperature measurement connectors, units support Modbus/TCP protocol, measure 120 x 55 x 75 mm, and operate in temperatures from -20 to +70Â°C.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Ethernet I/O Devices | I/O Modules

Ethernet I/O System offers 32-channel analog input units.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:37:17 -0500

Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2161 and ES2162 accept 32 differential DC current or voltage inputs, respectively, and interface signals to Ethernet devices/controllers with Modbus TCP/IP or UDP/IP protocol. Also, ES2162 units accept signals from 8B signal conditioning module racks through 2 DB25 ports to monitor temperature, frequency, and load cell sensors. Scanning updates all channels in less than 5 msec, and embedded Web page eliminates programming.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Ethernet I/O Devices

Single-Board RIO Devices aid embedded system deployment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:27 -0500

Used as integrated hardware option for deploying embedded control and DAQ applications, sbRIO-96xx devices combine industrial 266 or 400 MHz Freescale MPC5200 embedded, real-time processor; Wind River VxWorks RTOS; and reconfigurable Xilinx Spartan-3 FPGA on one PCB. They also integrate analog and digital I/O as well as 3 expansion slots. LabVIEW graphical system design platform can be used to customize Single-Board RIO hardware as well as develop all aspects of embedded systems.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: I/O Modules

Compact PCI Module facilitates 10/100/1000 Mbps testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Aug 2008 07:54:05 -0500

Offered as 3U cPCI module, 3410 Packet Processor offers four 10/100/1000 Mbps ports for performing layer 1-3, throughput, and packet loss tests on 10/100/1000 Mbps devices. Use of cPCI standard allows additional test functionality to be integrated in same chassis. Although data cannot be streamed/captured across cPCI backplane at full line rates, those rates are achievable between embedded processor and unit under test. Onboard RAM can then be used to capture up to limits of RAM size.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: CompactPCI Computer Boards | I/O Boards | Testing Equipment

Modular Controller supports ramp/soak control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Aug 2008 07:40:16 -0500

Modular Controller Series PID modules provide multi-zone PID control, data acquisition, and I/O for PC, DCS, or PLC control systems, while integrating data logging and advanced alarm management. With CrimsonÂ® 2.0 software, users can integrate multi-segment temperature profiling for complex processes. Unit has ramp/soak functionality that consists of profile or succession of setpoint ramp and soak periods, built-in protocol conversion facility, and multiple-protocol Ethernet port.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers
Safety and Security Equipment
Test and Measuring Instruments

Search for suppliers of: Programmable Controls | I/O Modules | Data Modules | Data Loggers & Data Logging Equipment | Data Acquisition Systems | I/O Controllers | Alarm Systems

Waveform/Pattern Generator has 128 kB FIFO memory.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:24 -0500

Including 4 models, USB-DIO-16H port-powered USB 2.0 device features 16 high-speed buffered digital inputs or outputs at continuous, sustained streaming speeds up to 16 MB/sec for unlimited waveform length. Capable of 80 MB/sec bursts with handshaking signals for synchronizing communications and additional 18 bits of general purpose digital I/O, it offers hot swapping functionality for quick connect/disconnect whenever users need additional I/O on their USB port.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Waveform Generators | Pattern Generators

I/O Terminal enables high-precision scientific measurement.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Model EL3602 EtherCATÂ® I/O terminal samples measurement readings with 24-bit resolution and accuracy within Â±0.01% at 25Â°C. Measuring signals directly in standard I/O system, analog 2-channel input terminal handles signals ranging between -10 and +10 V. Device is capable of executing high-precision measuring tasks on machine or for test rig automation.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Ethernet I/O Devices | Terminals | I/O Modules

Networked Control Peripherals offer modular flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:44 -0500

Suited for A/V integrators, BC4 standards-based control system network interface allows IP-based software and control systems to monitor and control hardware devices. Modularity enables matching of base units and expansion modules to fit any application. Powered by 802.3af PoE or 12 Vdc wall supply, system is comprised of base unit and various plug-in expansion I/O modules housed in 4.5 x 5 x 1 in. steel enclosure, which also contains network adaptor and temperature sensor.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: I/O Modules

I/O Terminals use eXtreme Fast Control(TM) technologies.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:36:25 -0500

EtherCATÂ® I/O terminals with time stamping latch exact system time at which edge changes occur; digital value output can occur at predefined times. Terminals with oversampling enable actual value acquisition or set value output with higher time resolution than communication cycle time. Distributed clocks with less than 1 Âµsec jitter and 1 Âµsec resolution are used for time synchronization across entire system. Fast I/O-enabled terminals offer input delays/switching times under 1 Âµsec.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: I/O Modules

Plug-In Cards expand system switch/multimeter functionality.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:52:33 -0500

Model 3724 Dual 1X30 FET Relay Multiplexer Card offers scanning speeds over 1,000 channels/sec, including measurement, and switch-only scan rates over 1,200 channels/sec. Solid state relays can be automatically configured into dual 1 x 30 or 1 x 60 multiplexer. Gated with 1 MHz input rate, Model 3750 Multifunction I/O Card features 40 DIO channels with high-current driver outputs that sink up to 300 mA. Other features include 2 programmable analog outputs and 4 totalizers/counters.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Multiplexers | Digital I/O Modules | I/O Boards

I/O Carriers feature vertical orientation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jul 2008 07:50:48 -0500

Optimizing airflow and thermal management, DeltaV(TM) VerticalPlus I/O Carriers support simplex and redundant DeltaV SIS modules that communicate via redundant safety bus, which is separate from basic process control system communications. Carriers can also communicate secure SIS data via redundant SISNet Repeaters to other DeltaV SIS nodes on vertical and horizontal carriers. Featuring modular design, carriers can be added as needed and only require T-type DIN rail for mounting.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Communication Components & Subsystems

I/O Modules offer complete BACnetÂ® solution.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:43 -0500

BASR-8M BAS Remote Expansion Modules can be daisy-chained together to BAS Remote Master (BASR-8M) to meet specific I/O requirements, and BASR-8M can be expanded to total of 32 Universal I/O points and 8 relay contacts to suit any building automation installation. Configurable Universal I/O can support BACnetÂ®/IP or Modbus/TCP points, and digital inputs can accept pulse trains in range of 0-40 Hz at 50% duty cycle to measure flow rates.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Building Automation Controls | I/O Modules

Sensor Actuator Interfaces support Ethernet/IP protocols.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:53 -0500

Available in IP67 housings, SAI-Active Universal Modules support Ethernet and Ethernet/IP protocols as well as Profibus-DP, CANopen, Modbus, and DeviceNet. Design promotes wiring flexibility for achieving modular and decentralized process control in automation applications. Able to be configured to meet application requirements, modules feature standardized M8 and M12 connectors to facilitate and accelerate plug-and-play installation in harsh environments for up to 16 DIO.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: I/O Modules

I/O Blocks are designed for Profibus networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:13 -0500

Including Input-only and Configurable versions, machine mount Profibus I/O Blocks feature all metal low profile housings that can survive rough treatment and still keep cables protected. Blocks incorporate high density inputs that enable use of splitters, set up switches that speed addressing process, and large, highly visible status LEDs. Both models provide range of inputs that can be set for NO/NC operation, and compatible Profibus cables and connectors are also available.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Profibus Components | I/O Modules

Bus Couplers provide flexible EtherNet/IP I/O connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:27:54 -0500

Offering field communication through 2 RJ45 ports, Inline EtherNet/IP bus coupler establishes connection to EtherNet/IP network and facilitates building linear structure. It measures 80 mm wide and can connect up to 61 IP20 modules to network. For distributed machine mount IP65/67 applications, Fieldline EtherNet/IP bus coupler connects up to 16 local devices. It has 2 Ethernet connections designed as D-encoded M12 sockets, 3-port switch, and transmission rates of 10 or 100 Mbps.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: I/O Modules | I/O Bus Coupler Modules

I/O Module features 18 digital inputs and CAN output.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:27 -0500

Operating on 12 V or 24 Vdc input, Model AX030300 features IP67 packaging and connectors for harsh environments. Ten digital inputs are user-selectable as active high/active low, while 8 digital inputs are user-selectable as active high/active low, disable input, PWM signal, pulse, or counter. Equipped with Windows-based Electronic Assistant(TM) for configuration, saving, and writing settings, AX030300 is suited for engine controls for power generation, co-generation, and stationary power.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Digital Controls | I/O Modules | Engine Controls

Analog Output Expander stops ground loops, phase errors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jul 2008 07:40:57 -0500

Four-channel analog output expansion board, MSXB 075, provides channel-to-channel and channel-to-PC isolation to eliminate ground loops and lets application update all channels simultaneously, even when on separate boards, to eliminate phase errors. Able to connect to DAP boards controlled by Windows applications, product also fits directly into DAPserver to form network-ready, isolated package. Outputs connect through DB37 male connector.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: I/O Boards