ThomasNet Industrial Newsroom -

Microwave Power Meters have 50 MHz power sweep calibrators.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:02 -0500

Model GAO2432 measures power from continuous waves, and calculates RF power lever of pulse modulated signal. Calibration and measurement of signals can be manually observed on front panel or controlled through GPIB interface on rear panel. Designed for ATE system, model GAO2433 dual-channel (A, B) meter can configure two 23200 series power probes, which can accurately measure power of continuous waves and pulse modulated inputs from 2 channels, displaying results on LCD screen.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Microwave Detectors | Power Meters

Benchtop Optical Meters measure power and energy levels.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:41 -0500

Featuring analog board, 1936-C and 2936-C optical power and energy meters are capable of power measurements of 11 fW to 20 kW and energy measurements of 7 µJ to 20 kJ. They offer repetition rates up to 10 kHz and frequency measurement of pulses up to 250 kHz. Internal 250,000 data point storage buffer and USB/RS-232 interfaces are included. Units support true rms measurements and have analog and digital filtering, trigger in/out control with alarm levels, and analog bar graph with 10x zoom.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Power Meters | Laser Power Meters | Energy Meters

Power-Monitoring IC provides ±1% accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:51 -0500

Suited for microprocessor and MCU power-monitoring applications, MAX6394 integrates highly precise bandgap reference which allows for trimming reset thresholds to as much as ±0.6% accuracy at room temperature. Unit has 9 fixed voltage thresholds, each with 0.7, 14, 105, and 826 msec preset timeout periods. Operating between -40 to +125°C automotive temperature range, it provides open-drain output that can be pulled up to 6 V, even when VCC is less than pull-up voltage.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Power Monitors | Application Specific Integrated Circuits (ASIC)

Power Detection Network offers remote notification options.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:01 -0500

I-Grid power-monitoring network tracks Dirty Power in real-time and offers reporting capabilities through Grid Alert Event Notification Service. Notifications - Immediate Notification, Corroboration, and Summary Reports - are delivered via email, pager, mobile phone, or any Internet-enabled PC to help determine root cause of downtime problems, regardless of location. Service also helps facilitate restart of plant operations.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Power Monitors

Monitors and Timers protect 3-phase equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:05 -0500

DIN rail mounted DLA Series 3-Phase Monitors protect equipment from adverse conditions such as phase loss (single phasing), undervoltage (brown-outs), and phase reversal (improper sequence). DTA Series Multifunction Time Delay Relays combine multiple timing functions and ranges into one DIN rail-mount package. Both are suited for users and OEMs in water, food, and automation industries.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Time Delay Timing Relays | Multifunction Relays | DIN Rail Mountable Relays | Power Monitors

Fiber Optic Test Kits prevent contaminated fiber.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Jul 2008 07:59:21 -0500

Suited for FTTx, LAN/WAN, and data centers found in cable and telecommunications networks, Fiber Optic Tests Kits provide tools necessary to inspect, clean, and perform power or attenuation measurements on fiber optic connections to avoid network damage during installation, qualification, and troubleshooting. Components include video fiber microscopes, optical cleaning tools, PocketClass(TM) or SMART optical light sources, optical power meters, and visual fault locator.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Testers | Fiber Optic Inspection Microscopes | Test Kits | Fiber Optic Accessories | Power Meters

Optical Power Meter has 800-1600 nm wavelength range.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 16 Jun 2008 07:42:53 -0500

Suited for fiber optic network maintenance, equipment research and development, GAO800 Optical Power Meter can test optical fiber power loss, continuity, and evaluate line transmission quality. It features storage and page up/down functions, adapters supporting FC, ST, and SC ports, 100 groups of memory and record management, auto shut off, and LCD with backlit display. Functions include relative power test in unit of dB, multi-wavelengths test, and absolute power test in units of dBm/µW.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Testers | Power Meters

Power Meter handles core CWDM test and measurement needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:39 -0500

Model OCC-55 Smart Optical Channel Checker is designed for CWDM system installation, upgrades, and troubleshooting. It operates in 1,260-1,620 nm range, and can analyze all 18 CWDM wavelengths in terms of individual power level and display measurement results in bar-graph or tabular mode. CWDM analyzer deploys USB interface that, when used in combination with OFS-355 software, provides customized reports which can be downloaded from OCC-55 to any PC.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Network Analyzers | Power Meters

Universal Power Alert indicates presence of stored energy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:25 -0500

Hardwired to circuit breaker or main disconnect, UPA-130 Universal Power Alert reduces risk of electrical arc flash by pre-verifying electrical isolation from outside of control panel. Redundant circuitry allows unit to be powered by same voltage it indicates. Designed to fit 30 mm knockout, NEMA 4x (IP66)-rated, 8-detector unit visually alerts operators to presence of any dangerous AC or DC potentials occurring between any combinations of 4 input lines.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Power Monitors

Compositive Power Meter tests optical networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:10 -0500

Featuring laser exploration and processing technology, GAO800 can be used to identify fiber, test fiber loss, check fiber continuity, and evaluate transmission quality of fiber chain. Also used for linearity and non-linearity tests, tester has 850, 980, 1,310, and 1,550 nm wavelength calibration points as well as storage and page up/down functions for test figures. Additional functionality includes relative power, multiwavelength, and absolute power tests.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Power Meters | Fiber Optic Testers

Optical Power Multi Meter offers ±5% accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:24 -0500

With 800-1,600 nm wavelength range, Model GAO801 Optical Power Multi Meter performs absolute power test in units of dBm or W, relative power test in units of dB, as well as loop and auto bi-directional test. InGaAs detector features -45 to +25 dBm optical power test range, 0.1% linearity display, and 0.01 dBm logarithm display. Powered by 9 V/160 mAh battery, it has memory capacity of 50 data items, high contrast backlit display, and adapters supporting FC, ST, and SC ports.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Multimeters | Optical Instruments | Power Meters

Power Monitor Sensor is designed for Linux products.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:53 -0500

Suited for use with Linux products including AKCP securityProbe units, Power Monitor Sensor is multifunctional power meter capable of measuring voltage, current, and energy usage in Watts on single-phase power line. It can work with 110 or 220 V supply voltages, with power sensor resolution of 0.1 A for measurements of rms current and 1 V for rms voltage. User can be alerted on sensor exceeding predefined threshold with various notification options.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Power Monitors | Power Meters | Multifunction Meters

Power Meter includes data logging capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:37:21 -0500

Designed for large-scale deployment within electrical distribution system, panel-mounted Shark 200® offers revenue meter functionality combined with data logging, communication, and field upgradeable I/O capability. Configurable unit includes 2 MB flash memory and 100BaseT Ethernet option, which allows user to connect to web page to view real-time readings.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Power Meters | Data Loggers & Data Logging Equipment

Optical Power Meter determines fiber performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:42 -0500

Using laser exploration and processing technology, GAO800 tests can perform linearity and non-linearity tests for optical network maintenance, equipment research, and development. It features 850, 980, 1,310, and 1,550 nm wavelength calibration points as well as digital storage and page up/down functions for test figure. Solution can identify fiber, test fiber loss accurately, check fiber continuity, and evaluate transmission quality of fiber chain.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Testers | Power Meters

Optical Power Meter accelerates multiport device testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jan 2008 07:45:34 -0500

Designed to optimize all steps of characterizing optical multi-port components, models N7744A and N7745A are available with 4 or 8 power-sensor channels. Minimum averaging time is 1 µs, and sample rate of 1 MS/sec enables time-resolved measurement of transient signals. Equipped with LAN, USB, and GPIB interfaces, solutions separate connecting task from measurement task to facilitate device connectivity, high-speed measurement DAQ, and data transfer for post-processing.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Power Meters

Channel Checker is designed for DWDM networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Dec 2007 07:30:15 -0500

Available in C-band or L-band models, Model OCC-56 Smart Optical Channel Checker facilitates channel routing verification in ROADM networks and troubleshooting DWDM systems. Fiber field test solution features support for 50, 100, or 200 GHz channel spacing, result storage capacity on external thumb drive, and tabular display. Weighing 1.1 lb, selective power meter is compatible with TLS-55 tunable laser source.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Power Meters | Network Analyzers

Power Meters offer Ethernet connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Dec 2007 07:51:18 -0500

Available with web-enabled Ethernet communications card, PowerLogic® PM800 Series includes 3 models with modules for power quality analysis, alarming, data logging, and digital and analog I/O. Transparent Ready® Ethernet port offers access to 3-phase energy and power quality data using standard web browser, e-mail, or power and energy management software. To detect risks to reliability, meters can measure harmonics and capture current and voltage sags and swells.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Power Meters

Wireless Sensor offers string-level PV solar monitoring.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Nov 2007 07:42:22 -0500

SensiNet® Green Solution includes SensiNet DC Voltage and Current Smart Sensors which perform string-level monitoring of Photovoltaic (PV) solar power generating systems. Housed in NEMA-4 compliant custom enclosures for outdoor use, sensors work with other SensiNet components including Temperature and Humidity sensors, Mesh Repeaters, Gateways, and services software to provide comprehensive system for power metering of commercial solar electric systems.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Wireless Sensors | Power Monitors | Commercial & Industrial Solar Power Systems | Solar Energy Equipment

Digital Meters suit utility and commercial applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Aug 2007 07:42:27 -0500

As first line of defense against power problems, Models IQ 250 and 260 can monitor energy usage or power quality for building, section of building, or single load. Units integrate into web-based Power Xpert® Architecture, which measures, monitors, connects, and manages power systems. Providing view of all power, communications, and management systems via Modbus, meters are accessible through existing Ethernet networks with web-based reporting using Power Xpert Gateway.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: Power Meters | Digital Meters | Energy Meters

Current, Voltage, Power Monitor features I²C interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jul 2007 07:43:35 -0500

Model INA209 high-side measurement, bi-directional current/power monitor IC offers 1% accuracy over -40 to +85°C temperature range with 100 µV maximum offset. Enabling monitoring and control of current, voltage, and power, device monitors drop across shunt resistor, senses shunt bus voltage from 0-26 V, and offers full scale readings as low as ±40 mV. I²C interface includes timeout to prevent bus lock-up and high speed mode to enable communications up to 3.4 MHz.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Application Specific Integrated Circuits (ASIC) | Voltage & Current Monitors | Power Monitors