ThomasNet Industrial Newsroom -

Rate Indicator/Totalizer uses HART communications protocol.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Aug 2008 07:33:40 -0500

Compatible with Hoffer turbine flowmeters and other frequency producing flowmeters, HRT1 rate and total indicator features 20-point linearization, scaled pulse output, and 4-20 mA loop powered analog output. HART® protocol allows communication with processor via software or handheld communicator, enabling settings adjustment and diagnostic checks. Other features include rate, total, and grand total display as well as 2 optional alarm outputs configurable for rate and total.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers | Flow Indicators

Thermal Mass Flow Meter offers optional Profibus interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:41:13 -0500

Model XFM can be programmed remotely, stores calibration data for 1-10 gases and conversion factors for up to 32 gases, and has accuracy of ±1% of FS at calibration temperature and pressure. Automatic sensor zero offset adjustment can be activated locally (maintenance push button) or remotely (via digital interface). It features digital interface RS485 and RS232, programmable totalizer, high/low flow alarm limits, self-diagnostic tests, and 23 Volumetric Flow/Engineering Units.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Stainless Steel Flowmeters

Sight Glass is suited for use on pressurized oil tanks.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:07 -0500

Offered in variety of sizes with NPT threads from 3/8 to 1¼ in., inch size Brass Oil Level Sight Glasses have body made of brass, natural glass sight window, and optional reflector of heat resistant technopolymer plastic (Polysulfon). Scratch proof glasses are sealed with o-ring on periphery and not on face edge, so leak tightness is not affected by axial pressures.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Glasses

Plastic Sight Glasses are used to determine oil level.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Feb 2008 07:55:55 -0500

Designed for light-duty applications, Plastic Oil Level Sight Glasses are made of transparent, high-resistance polyamide with British Standard Pipe Parallel (BSPP) Thread. Each comes with unassembled, oil-resistant synthetic rubber gasket, and nylon plastic has max heat resistance of 194°F.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Glasses

Light/Sightglass Combinations suit hazardous locations.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Aug 2007 07:41:41 -0500

Available with standard nominal viewing diameters of 5, 6, 7, and 9 in., Series SLEX-100/NW and REX-100/NW provide illuminating and viewing through single port. Offering glare-free illumination, lighting units are explosion-proof UL-844 and C-UL/CSA C22.2 No. 137 listed. Series NW Circular Sightglasses are manufactured from ASME Section VIII acceptable metals, and have pressure ratings of 150 psig pressure and full vacuum at 300°F.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Inspection Lights | Explosion Proof Lights

Sight Flow Indicator features dual-window design

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jul 2007 08:04:37 -0500

Available with full ANSI pressure Class 150 rating, Series FIF optimizes on-the-spot viewing of pipeline contents. Solution features flanged ends per ANSI B16.5/B16.24 and may be configured with flapper, drip tube, or rotary flow indicators. Standard materials of construction include bronze carbon steel or 316 stainless steel; borosilicate glass lens material; and carbon steel or ductile iron lens retainers. Options include DIN flange connections and double window assemblies.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Flow Indicators

Circular Section Sightglass complies with ASME VIII.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jul 2007 07:59:32 -0500

Manufactured from ASME Section VIII-acceptable metals, Series NW Weld Pad Connection Circular Sightglasses are offered with nominal viewing diameters of 3, 4, 5, 6, 7, and 9 in. as standard for on-the-spot visual inspection of pipeline's contents. Lower flanges, constructed of carbon steel and stainless steel, can be supplied thicker if required to reinforce vessel opening. Products have standard ratings of 150 psig pressure and full vacuum at 300ºF.

This story is related to the following:
Test and Measuring Instruments

Indicator lets user monitor temperature or process value.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Apr 2007 08:30:26 -0500

Using PTC or NTC thermistor, Series TID offers temperature range from -58 to 302°F. Process values can be displayed from -999 to 999 counts using 4-20 mA signal from transmitter. Available with red, green, or blue display, process indicator has adjustable span and zero on 4-20 mA models.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Process Control Indicators | Temperature Indicators | Process Monitors

Meters and Controllers provide gas flow measurement.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jan 2007 07:09:12 -0500

Brooks® Model 4800 Series Mass Flow Meters and Controllers feature Micro Electro Mechanical System sensor to deliver response to changes in gas flow rate. Allowing gas to flow directly across sensor, compact, modular instruments provide measurement and control of air, N2, O2, Ar, He, H2, CO2, CO, N2O, CH4, CH3H6, and C3H8. Model 4850 mass flow controller uses PID algorithm to optimize control valve response, and match actual mass flow to changes in setpoint.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Gas Flowmeters | Mass Flow Controllers

Process Monitoring Indicator offers 2 msec sampling time.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Dec 2006 08:07:00 -0500

Series 2400 provides real-time monitoring and instantaneous reaction to changing process conditions, independently providing engineering measurements and constantly comparing programmable safety limits. It features 100,000 points of resolution, 0.1% FS accuracy, and 3 configurable alarms with failsafe function. Two universal inputs are configurable for pressure, force, temperature, displacement, and linear signals, and 2 auxiliary channels are provided for normalized voltage or current signals.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Process Monitors | Process Control Indicators

Pulse Input Flow Indicators offer batch controller mode.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Nov 2006 07:46:50 -0500

Suited for any flow application involving pulse signal, FIP Series flow rate/totalizer/batch controllers accept pulse, open collector, TTL, or square wave inputs and provide power to drive sensor. Meters display flow rate and total on 7-segment LED display that provides up to 4½ digits of rate display and 6 digits of total display. They can be equipped with one 4-20 mA retransmission output and 2 relays, which can also be used for alarming or batch controlling.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flowmeters | Flow Indicators

Flow Indicators suit analog signal applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Nov 2006 07:49:54 -0500

Accepting all standard process signals such as 4-20 mA, 1-5 V, and 0-5 V, Series FIV flow rate/totalizer/batch controllers feature 7-segement LED display that provides 4½ digits of flow rate and 6 digits of total. For applications requiring more than display of rate or total, meters can be equipped with 2 relays and 4-20 mA retransmission output. Relays can also be used for alarming based on flow rate or for batch controlling based on flow total.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Flow Indicators | Flow Controls | Flow Totalizers | Batch Controllers

Transmitter includes FOUNDATION(TM) fieldbus technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Apr 2006 08:12:45 -0500

Rosemount® 3095 MultiVariable(TM) Transmitter delivers 4 measurements from 1 device, including pressure, differential pressure, temperature, and fully compensated mass flow. Mass flow function block applies measured pressure and temperature to perform real-time flow compensation for all flow variables that could contribute to flow errors, including density, discharge coefficient, gas expansion factor, bore of differential producer, and velocity approach.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Transmitters | Mass Flowmeters

Hydraulic System Analyzer indicates flow and pressure.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Oct 2005 07:09:43 -0500

Style K Hydraulic System Test Analyzer offers choice of aluminum constructed meters for pressures up to 3,000 psi or stainless steel meters for pressures up to 5,000 psi. Available for 3/8-1½ in. NPT or SAE port sizes, product is capable of handling operating temperatures up to 240ºF and flow rates to 150 gpm with ±2.5% of range accuracy.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Indicators | Pressure Indicators | Hydraulic Testers

Sight Flow Indicators offer in-line viewing of pipelines.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Jun 2005 08:01:19 -0500

Provided with flanged ends per ANSI B16.5 and B16.24, Series FIF is rated at 150 psig and may be configured with flapper, drip tube, or rotary flow indicators. Units are available in ½â�"20 in. sizes with bronze, carbon steel, or 316 steel body; carbon steel or ductile iron lens retainer; carbon steel fasteners; neoprene or Teflon® gaskets; and borosilicate glass lenses. Options include DIN flange connections and double window assemblies.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Flow Indicators

Oil Level Sight Glass comes with natural or ESG glass.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 May 2005 09:09:36 -0500

Oil Level Sight Glass is made of aluminum with NBR synthetic rubber seal, natural glass sight glass, and heat-resistant, technopolymer plastic reflector. Scratchproof sight glass offers leak-tight seal that is not affected by axial pressure. Seal resists heat to 212°F, and sight glasses are available in metric pipe and BSPP parallel threads. ESG Glass Oil Level Sight Glasses use ESG glass and Viton rubber seal for heat resistance to 356°F.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Glasses

Visual Flow Indicators meet sterile-service needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Feb 2005 07:42:22 -0500

Sterile Full View Flow Indicators provide operators with 360° view of process fluid. Installed in new systems or as retrofit component, units are designed for pressures up to 150 psig and come in 11 sizes with standard hygienic clamp connections or optional orbital weld connections. Providing internal transition between electropolished stainless steel heads, O-rings, and precision bore glass window, units can be cleaned-in-place, sterilized-in-place, and autoclaved.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sight Flow Indicators | Flow Gages | Indicating Gages | Flow Indicators

In-Line Sight Glasses target sanitary applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 13 Dec 2004 07:54:17 -0500

Sanitary Sight Glasses meet process requirements of food, dairy, pharmaceutical, and beverage plants. End-cap style sight glasses are available in Lexan® or acrylic material for use with any style of sanitary clamp. In-line sight glasses adapt to bevel seat, buttweld, I-line, John Perry, or Q-line type ends. These glasses use Pyrex® glass with white buna gaskets, resisting bacterial growth. Models are offered in tube OD sizes ranging from 1â�"6 in.

This story is related to the following:
Test and Measuring Instruments
Food Processing and Preparation

Search for suppliers of: Sight Glasses

Indicator resists contamination during washdowns.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Dec 2004 07:52:38 -0500

Model E1010 Indicator comes with NEMA 6/4X rating and enables sophisticated weighing, checkweighing, counting, and process control performance. Rugged package is impervious to moisture and dust and resistant to high-pressure washdown.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Process Control Indicators | Weight Indicators

Testing Instrument has 1â�"6,000 scc/m flow range.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Oct 2004 07:57:16 -0500

Designed for mass flow leak detection, Sentinel F-21 utilizes solid-state mass flow sensor to respond to flow changes. Dual tandem regulators ensure constant pressure source for reliable readings, and 32-point calibration lends to accuracy of flow measurement. Other offerings include dual pressure testing capability and self-test feature. Unit can store up to 1,000 test results for output to printer or computer.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Mass Flow Monitors | Leak Detectors | Flow Rate Testers