ThomasNet Industrial Newsroom -

Side Stream Assembly measures corrosion/process parameters.

info@productnews.com (ThomasNet News) — Mon, 06 Jul 2009 08:34:07 -0500

Ensuring piping assets are monitored against underprotection from corrosion damage, Cosasco® Side-Stream Assembly monitors parameters such as metal loss, corrosion rate, erosion rate, pressure, temperature, flow, and bacterial activity. Multiple 1 in. tees are included, which can be configured with Microcor® corrosion/erosion rate measuring, Corrater® LPR and galvanic measuring, Bio-probes, and process parameter measuring systems. Corrosion/process data is provided within minutes.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Corrosion Detectors | Corrosion Measurement Instruments

Measurement System maximizes corrosion inhibitor efficiency.

info@productnews.com (ThomasNet News) — Wed, 03 Jun 2009 08:28:51 -0500

Configured to meet specific requirements, Side-Stream Assembly can measure metal loss, corrosion/erosion rates, pressure, temperature, flow, and bacterial activity in pipelines. It includes multiple 1 in. tees, each configured with choice of monitoring technologies, and provides data within minutes. Flexible and adaptable configuration does not require plant shutdown for installation, and design enables system to be moved to other test locations.

This story is related to the following:
Test and Measuring Instruments
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Measuring Instruments | Corrosion Detectors | Pipe Assemblies

Wireless Transmitter provides corrosion monitoring.

info@productnews.com (ThomasNet News) — Mon, 27 Apr 2009 08:33:45 -0500

Available with Hazardous Area Certification, Microcor® Wireless Transmitter provides corrosion rates in any process media at speeds approaching real time. Unit uses high-resolution metal loss measurement, providing 18-bit resolution and operating from -40 to 70°C. Transmitter works as node in self-organizing network to ensure consistent delivery of data. In event temporary obstruction blocks direct connection, network automatically reroutes signal to adjacent device.

This story is related to the following:
Test and Measuring Instruments
Communication Systems and Equipment
Sensors, Monitors and Transducers

Search for suppliers of: Corrosion Detectors | Wireless Transmitters | Corrosion Measurement Instruments

Tester determines passivation of stainless steel.

info@productnews.com (ThomasNet News) — Wed, 19 Nov 2008 07:42:52 -0500

With no size limitation to test piece, Model 2026 Passivation Tester measures corrosion tendency of stainless steel surfaces. Unit detects surface free iron through galvanic process, which is measured as voltage. Measurement can be repeated over surface of test part and at sensitive spots, such as seams and welds. In addition to all chromium containing stainless steels, Model 2026 is suited for use with precipitation-hardened steels such as 17-4, 15-5, and 17-7.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Corrosion Testers

Corrosion Monitoring System provides online operation.

info@productnews.com (ThomasNet News) — Thu, 13 Nov 2008 07:43:46 -0500

Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop, users can access data systems for configuration and graphical interface remotely.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Corrosion Measurement Instruments | Corrosion Detectors

Monitor determines external pipeline corrosion rates.

info@productnews.com (ThomasNet News) — Mon, 20 Oct 2008 07:44:47 -0500

Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to extend range of soils in which measurements can be made.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Soil Testing Equipment | Corrosion Measurement Instruments | Corrosion Testers | Corrosion Detectors

Portable PEC Test Instrument detects sub-surface corrosion.

info@productnews.com (ThomasNet News) — Thu, 18 Sep 2008 07:40:17 -0500

Featuring TFT color screen, 1 Gb memory, and 80 Gb hard disk, Pulsec uses pulsed eddy current (PEC) to deliver diagnostic imaging and depth resolution needed when inspecting multi-layer aircraft structures. Non-destructive tester has 6 hr battery life, weighs 13 lb, and is suited for inspecting difficult to reach places on aircraft. It can also detect cracks and offers on-board, real-time analysis and data recording/storage as well as export capabilities.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Corrosion Testers | Eddy Current Testers

Environmental Condition Monitor detects corrosive conditions.

info@productnews.com (ThomasNet News) — Tue, 23 Aug 2005 10:26:38 -0500

Providing constant surveillance of atmospheric environment, Model ECM(TM) allows rapid detection of humidity, temperature, and differential pressure, permitting corrective action before damage to sensitive equipment occurs. Utilizing 2 thin-film sensors, unit displays corrosion rate using indicator lights that correspond to ISA classifications of environments for copper and silver. Analog and/or digital outputs provide remote alarming, display, and recording.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Corrosion Detectors | Environmental Monitoring Systems

Test Cabinet offers temperature range of -30 to +90°C.

info@productnews.com (ThomasNet News) — Tue, 20 Jan 2004 07:33:36 -0500

Model CCX Advanced Cyclic Corrosion Cabinet with 90°C option features temperature-resistant materials for dispersion towers and connectors, temperature-resistant fiberglass shell and gel coat, fiberglass cover with tempered-glass viewing window, and insulation around exposure zone. Unit replicates stresses that result in degradation including salt-saturated air and salt spray, high humidity, condensation, sunlight, and temperature variations.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Test Cabinets | Corrosion Testers

Corrosion Detection Transmitters offer real-time monitoring.

info@productnews.com (ThomasNet News) — Wed, 31 Dec 2003 07:45:03 -0500

Corrosion Detection Transmitters allow user to monitor, online, effectiveness of corrosion inhibitors, and to detect and correct corrosion issues through preventive maintenance. They feature 2-wire, loop-powered, 4â�"20 mA signal with HART protocol. Suited for direct or remote mounting, transmitters can be located in general-purpose and hazardous locations. Probes are available in various styles and materials so they satisfy most applications.

This story is related to the following:
Test and Measuring Instruments