ThomasNet Industrial Newsroom -

Digital Pressure Test Gauges expand functionality via software.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:37 -0500

BetaGauge PI and BetaGauge PI Reference Class gauges are offered with BetaLOG(TM) software, which can be used to configure operation for ad-hoc or download mode to deliver complete data logging flexibility. Enabling simultaneous recording of temperature and pressure, gauge/software combination supports data logging runs from seconds to several weeks covering all data or specific points of interest. BetaGauge PI supports multiple data sets that can be mixed between modes as needed.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Digital Pressure Gages | Industrial Data Logging Software | Test Pressure Gages

Test Stand facilitates torque measurement.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Electric Test Stands | Torque Testers | Tension Testers | Tensile Strength Testers | Materials Testers | Test Stands | Torque Meters | Torque Measuring Instruments | Force Measuring Instruments | Force Measuring Gages

Gauging Platform provides accurate, real-time measurement.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:55 -0500

With up to 2,000 measurement profile points and Hi-Res sensor, IPlus! measures weight or thickness in cast film extrusion, sheet extrusion, nonwovens, vinyl calendering, and extrusion coating applications. Operator interface facilitates use of this measurement and control system, which incorporates sensor technology and software. Optionally, AutoDie Profile Control's (APC) non-linear mapping capabilities help reduce scrap or non-conforming product.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Thickness Measurement Equipment | Thickness Testers | Thickness Measuring & Testing Instruments | Thickness Gages

Force Gauge has ergonomic design.

info@productnews.com (ThomasNet News) — Thu, 01 Oct 2009 08:42:43 -0500

Available in 0.5-200 lb capacities with 200% overload rating, ergonomic DART 2.0 FGV-XY offers onboard statistical calculations for max, min, average, and standard deviation data. USB port and 1,000-point memory allow for data exporting in real-time or after testing is complete. System, further equipped with RS-232C and analog outputs, offers 1,000 Hz sample rate and accuracy to 0.2%. Built-in Hi-Lo Comparator enables go-no go testing.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Force Measuring Gages

Surface Finish Gage features Bluetooth wireless drive unit.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:55 -0500

Capable of taking surface finish measurements up to 4 m from evaluation unit, portable MarSurf® M 300 can take measurements in any position, and has measuring range of up to 350 µm. It offers measurement cut-off length selections of 0.08-2.5 mm, surface parameters conforming to ISO, ASME, JIS, and other standards, and can store up to 40,000 measurement results and 30 profiles. Unit includes PHT 6-350 probe, height adjustment bracket, and power supply with 3 plugs for 90-264 V input.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Surface Finish Gages

Five-Axis CMMs offer automated surface finish measurement.

info@productnews.com (ThomasNet News) — Tue, 29 Sep 2009 08:30:39 -0500

REVO® 5-axis machines are available with SFP1 surface finish probe option, which allows surface finish inspection to be fully integrated within CMM measurement routines. With measurement capability of 6.3-0.05 Ra, probe lets CMM users automatically switch between part scanning and surface finish measurement; analysis is contained in one report. Probe incorporates C axis that allows probe tip to be automatically orientated to any angle to suit part.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Coordinate Measuring Machinery (CMM) | Surface Finish Gages

Measurement System records spot weld force.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:09 -0500

Storing all information in Tablet PC or laptop for each recording, Bluetooth-enabled weld probe lets technicians follow schedule of maintenance for each welder via GUI. Sensor links up with PC upon power-up, and each clamping force measurement is stored automatically, along with date, time, and designation of welder. Upon completion of each measurement, technician is directed to next welder on list. When audit rounds are complete, technician may print/save audit data for QC.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers
Welding Equipment and Supplies

Search for suppliers of: Force Measuring Instruments | Force Measuring Gages | Welding Force Gages

Hook Style Depth Gauge also measures thickness.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:39 -0500

IP67-rated Digimatic Hook Style Depth Gage features hook positioned perpendicular to end of main scale, enabling depth gage jaws to securely affix to lips or other projections. Dustproof, chipproof, and coolantproof protection promotes .0005 in. resolution and ±.0015 in. accuracy at depth range of .4-8.4 in. Featuring stainless steel construction with hardened and micro-lapped measuring faces, gauge has mounting holes in base, and wider extension bases are available.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Depth Gages | Hook Gages | Stainless Steel Gages | Thickness Gages

Tire Pressure Monitoring System is totally self-initializing.

info@productnews.com (ThomasNet News) — Mon, 24 Aug 2009 08:27:40 -0500

Using one directly integrated antenna, direct-measuring TPMS will detect and report any tire pressure loss as small as 70 mbar within 10 sec during journey or as soon car is started after being parked. Automatic localization of tire pressure sensors enables drivers to change wheels containing TPMS technology. Adaptive auto-learn capability detects wheels' sensor positions and eliminates need for manual learning procedure. New set of tires can be localized within 2-3 min.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
Green & Clean

Search for suppliers of: Tire Pressure Monitoring Systems | Rubber & Tire Sensors | Pressure Sensors | Tire Pressure Gages

Wireless Radar Gauge meets ISA100.11a standard.

info@productnews.com (ThomasNet News) — Wed, 19 Aug 2009 08:35:11 -0500

Capable of capturing wide range of tank measurements, FlexLine Wireless Radar Gauge transmits collected data via OneWireless(TM) network to control rooms, helping process manufacturers to monitor tank levels and prevent hazardous incidents in their plants and terminals. Gage can also track temperature, pressure, water, and overfill, eliminating need for multiple gauges and transmitters. Product meets accuracy and security standards of Dutch Weight and Measurement (W&M) authority.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Wireless Tank Level Indicators | Tank Pressure Gages | Tank Level Gages | Radar Gages

DP Gauges signify when pumps and filters need servicing.

info@productnews.com (ThomasNet News) — Fri, 14 Aug 2009 08:29:59 -0500

Available with 4.5 or 6 in. dial, PDT Differential Gauge Series indicates pressure drops, which may signify when filtration in pumps or other equipment needs to be changed or serviced due to clogging. Rated ±1% ASME Grade 1A, gauges feature brass or stainless steel internal system and single aluminum micrometer pointer to indicate pressure difference. Pressure sources are measured by 2 independent but matched Bourdon tubes, housed within aluminum case.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Differential Pressure Gages

Air Gaging Column eliminates need for PC.

info@productnews.com (ThomasNet News) — Thu, 13 Aug 2009 08:28:47 -0500

Designed for high-production, tight tolerance parts, MRA Air/Electronic Column integrates measurements and SPC data without PC. System features 12 in. touch screen and 4 bays that allow electronic cards or air-electronic cards to be inserted. With each card able to host 4 measurements, MRA can simultaneously measure 16 air, 16 electronic, or any combination of both signals. Operating from 110 V, 19 in. rack-mountable device includes Ethernet, USB, serial, and digital I/O ports.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Gages | Air Gages

Dimensional Gage performs pneumatic measurement and matching.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 08:30:01 -0500

Providing high accuracy measurement of precision ID and OD of workpieces, Matchscan MS500 Basic suits applications such as fuel injector assemblies, cam and crank bores in engine blocks, where precision fit is essential for correct part function. It includes 17 in. touch screen computer, CMZ32 software for automatic measurement with multi-language capabilities, and SPC32 software for statistical control of measurement processes. Unit can also perform sub-micron part classification.

This story is related to the following:
Test and Measuring Instruments
Electronic Components and Devices

Search for suppliers of: Measuring Instruments | Electronic Equipment & Devices | Precision Gages | Geometry Measuring Gages | Dimensional Gages | Diameter Gages

Force Measurement Module features plug and play operation.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 07:43:36 -0500

With rugged aluminum housing, RG smart load cell is designed for integration in to assembly systems, weighing systems, and process automation and testing automation applications. It is controlled by commands sent from PC/PLC thru its RS-232 connector. Device has ASCII command library that allows for functions including peak force recall, set points, data averaging, data filtering, and calibration. Module is offered in capacities of 2-200 lb.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Tension Testers | Torque Measuring Instruments | Electric Test Stands | Torque Testers | Tensile Strength Testers | Materials Testers | Torque Meters | Force Measuring Instruments | Force Measuring Gages

Gauges measure low range differential pressure.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:47 -0500

Constructed with aluminum housing, acrylic lens, and silicone diaphragm, Series 6000 features DP ranges from 0-0.25 in. H2O to 0-20 psid. Bi-directional models are available in 0.25-0-0.25 in. H2O to 15-0-15 in. H2O. SWP is -20 in. Hg to 15 psig with 35 psig rating for 0-10, 0-15, and 0-20 psid ranges. Operating from -20 to 140°F, gauges offer accuracy from ±2-4%, depending on DP range.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Differential Pressure Gages

Thickness Gauge features automatic substrate recognition.

info@productnews.com (ThomasNet News) — Mon, 03 Aug 2009 08:32:29 -0500

Offering measuring range to 120 mil for Fe and NFe substrates, one-handed byko-test 4500 requires no cable or calibration when changing from ferrous to non-ferrous substrates. It has integrated, non-wearing ruby probe tip to protect probe and surface of measured area. Ready to use instrument comes with carrying case with zero plates, calibration certificate, operating instructions, and batteries.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Coating Thickness Gages

Master Gauges meet needs of pressure instrument testing.

info@productnews.com (ThomasNet News) — Thu, 30 Jul 2009 08:33:27 -0500

Type 1082 master gauges feature 0.25% FS accuracy in ranges from vacuum through 10,000 psi and are available in 4½, 6, and 8½ in. dia versions. External zero adjuster, temperature compensation, and Monel® wetted parts ensure precision and media compatibility. Suited for field calibration, 3 in. Type 1084 pocket test gauges cover ranges to 1,000 psi with 0.5% FS accuracy.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Vacuum/Pressure Combined Gages | Test Pressure Gages | Master Gages

OEM Panel-Mounted Spring Gage weighs 0.99 lb.

info@productnews.com (ThomasNet News) — Tue, 28 Jul 2009 08:27:34 -0500

Measuring 7 x 1.4 x 3.5 in., Tiger CNC mounts directly on control panel of spring coiling machine. Digital gage allows spring manufacturers to sort springs directly through coiler's electronics without requiring separate computer interface. Unit is available with 2 software packages: Tiger and Super Tiger.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Sorting Gages

Pressure Gage is resistant to vibration and heat.

info@productnews.com (ThomasNet News) — Fri, 24 Jul 2009 08:29:59 -0500

Constructed with 316 stainless steel body, Mini-Siphon Type 910.24 is designed to replace old pigtail and coil siphon. Thermal barrier protects pressure gauge from harmful steam, hot vapors, and liquids, while 316 stainless steel inner chamber reduces pressure surges and water hammer. Mounted vertically or horizontally, product has ½ in. NPT male to ½ in. NPT female connection. Max media pressure and temperature ratings are 6,164 psi and 840°F, respectively.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Pressure Gages

Functional Load Tester offers multi-handset capability.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:35:58 -0500

Enabling TD-LTE infrastructure equipment vendors to test performance of TD-LTE base stations under loaded conditions, TM500 TD-LTE Multi-UE accelerates infrastructure equipment development programs. Unit replicates multiple TD-LTE handsets in single test mobile, simplifying complex tasks such as functional network testing with multi-UEs and performance measurement of resource scheduling algorithms. System also offers handset configuration and measurement capabilities.

This story is related to the following:
Test and Measuring Instruments
Computer Hardware and Peripherals

Search for suppliers of: Communications Testers | Load Measuring Instruments | Network Analyzers