ThomasNet Industrial Newsroom -

Mold Counter monitors mold operation and validates data.

info@productnews.com (ThomasNet News) — Fri, 12 Jun 2009 08:30:46 -0500

Using non-resettable, mechanical, 7-digit counter, CounterView records accurate number of mold cycles, and relies on sensor that detects when mold has closed. Each mold cycle triggers display to increase or decrease counting mechanism based on user preference. CounterView also validates process monitoring data and assists mold maintenance procedures. Operating to 250°F, product is available in inch and metric standards and features glass-filled nylon housing.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Mechanical Counters

Totalizer calculates and displays flow rates/totals.

info@productnews.com (ThomasNet News) — Mon, 02 Mar 2009 08:30:26 -0500

Model RT20 calculates and displays flow rates and totals from flowmeters with pulse, sine wave, or frequency outputs. Available as battery operated or externally powered device, it features 6 digit LCD total, 8 digit cumulative, and 5 digit rate display. Housed in IP66/67 rated aluminum field- and panel-mountable housing, product also includes scaleable universal pulse or frequency inputs, scaled pulse output, non-volatile memory and reverse polarity protection.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers

Time-to-Digital Converter offers 5 picosec timing resolution.

info@productnews.com (ThomasNet News) — Wed, 03 Dec 2008 07:46:31 -0500

Model U1050A-002 of U1050A line of Acqiris time-to-digital converters has measurement range of up to 20 sec and ratio of 1:4.109. Module can operate in either single-start or multi-start acquisition modes with timing information on all 13 independent channels encoded relative to common channel. Time measurement on unit can be based on either internal low jitter of less than 3 ps rms, high stability of ±2 ppm clock source, or external 10 MHz reference input.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Module Timers | CompactPCI Computer Boards | Digital Signal Converters | Event Counters

Rate Indicator/Totalizer uses HART communications protocol.

info@productnews.com (ThomasNet News) — Wed, 27 Aug 2008 07:33:40 -0500

Compatible with Hoffer turbine flowmeters and other frequency producing flowmeters, HRT1 rate and total indicator features 20-point linearization, scaled pulse output, and 4-20 mA loop powered analog output. HART® protocol allows communication with processor via software or handheld communicator, enabling settings adjustment and diagnostic checks. Other features include rate, total, and grand total display as well as 2 optional alarm outputs configurable for rate and total.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers | Flow Indicators

Electronic Hand Tally has 5-digit display.

info@productnews.com (ThomasNet News) — Thu, 27 Mar 2008 07:53:56 -0500

Powered by replaceable internal battery and measuring 3.65 x 2.20 x 0.80 in., Series L17 Electronic Hand Tally counts both up and down and can be reset with push of button. Audible sound option to signal counting can be turned on and off, and battery will last approximately 2 yr with sound turned off.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Counters | Hand Tally Counters

Time-to-Digital Converter features 6 stopwatches.

info@productnews.com (ThomasNet News) — Wed, 01 Aug 2007 07:44:31 -0500

Suited for time measurement applications, Model TC890 records multiple events or hits on each of 6 input channels, with timing resolution of 50 ps and mean dead time between sequential pulses on same input of less than 15 ns. Precision time measurement is achieved with less than 3 ps rms jitter and ±2 ppm stability. Running at full speed, instrument offers 25 million events/sec data-throughput. It enables event counting or histogram creation for data and spectra comparison.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Digital Signal Converters | Event Counters

Panel Meter displays rates or totals up to 6-digits.

info@productnews.com (ThomasNet News) — Thu, 08 Feb 2007 07:00:13 -0500

Laureate Model VF programmable panel meter and process signal totalizer is UL-listed, and displays rates or totals from transducers with 4-20 mA, 0-1 mA, or 0-10 V process signal output. Suited for flow and non-flow applications, unit converts analog signal to frequency, which is converted to rate with accuracy of ±0.02% of full scale at 25 readings/sec. Adaptive filter reduces variations due to noise while responding to actual changes in signal level.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Totalizers | Panel Meters | Analog-to-Frequency Converters

Counters use input/output boxes for added capabilities.

info@productnews.com (ThomasNet News) — Tue, 30 Jan 2007 07:15:04 -0500

Compatible with manual machine tools up to 3 axes, ND 780 DRO uses Model IOB 49 to provide 2 additional functions, depending upon application. When milling application is active, switching functions can be executed, and when turning application is active, IOB 49 makes it possible to machine with constant cutting speed. For machines with up to 6 axes, POSITIP 880 uses IOB 89 for 8 additional switching inputs and 9 switching outputs. Both IOBs are rail-mounted in electrical cabinet of machine.

This story is related to the following:
Display and Presentation Equipment
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Electronic Counters | Digital Readout Systems

Flow Indicators suit analog signal applications.

info@productnews.com (ThomasNet News) — Tue, 21 Nov 2006 07:49:54 -0500

Accepting all standard process signals such as 4-20 mA, 1-5 V, and 0-5 V, Series FIV flow rate/totalizer/batch controllers feature 7-segement LED display that provides 4½ digits of flow rate and 6 digits of total. For applications requiring more than display of rate or total, meters can be equipped with 2 relays and 4-20 mA retransmission output. Relays can also be used for alarming based on flow rate or for batch controlling based on flow total.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Flow Indicators | Flow Controls | Flow Totalizers | Batch Controllers

Dual Channel Counter suits industrial process monitoring.

info@productnews.com (ThomasNet News) — Mon, 13 Nov 2006 07:44:32 -0500

Designed for pulse rates from 0.05 Hz-1 MHz, UL-rated Laureate Model FRR counter can add, subtract, divide, and multiply 2 independently scalable pulse or AC input channels. Universal dual-channel signal conditioner accepts magnetic signals from 12 mV-250 Vac as well as signals from proximity switches with PNP or NPN output, TTL or CMOS logic, and contact closures. Built-in isolated 5, 10, or 24 Vdc excitation supply for powering proximity switches and other sensors is included.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Electric Counters | Binary Counters | Process Monitors

Digital Counter is suited for lab and plant use.

info@productnews.com (ThomasNet News) — Mon, 13 Feb 2006 07:04:27 -0500

With display that reads to 99,999, water-resistant Digital Counter features O-ring-sealed and shock-resistant ABS plastic case. Counter is electronic, with solid-state construction that eliminates gear and miscount problems. Tactile click buttons provide positive action, and fail-safe design eliminates accidental reset. Measuring 2 5/8 x 1 2/3 x 5/6 in., battery-powered unit weighs 1 oz and provides over 2 years of continuous operation.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Counters

Laser Copy Counters are suited for fine sheet counting.

info@productnews.com (ThomasNet News) — Tue, 18 Oct 2005 07:05:29 -0500

Programmable SCATEC-10 and SCATEC-15 sensors, designed for non-contact counting, can also be used in applications involving lap or shingle stream counting. Both include keypad, LCD display, additional connector, and retro-reflective device that counts separated sheets. Able to be connected to computer for remote control and programming, products come with ScaDiag software and can detect sheets down to 0.1 or 0.15 mm at rates to 1.5 million copies/hr.

This story is related to the following:
Machinery and Machining Tools
Printing and Duplicating Equipment
Test and Measuring Instruments

Search for suppliers of: Printing Counters | Counting Machinery | Electronic Counters | Programmable Counters

Timers and Counters offer programmable operation.

info@productnews.com (ThomasNet News) — Mon, 19 Sep 2005 07:27:58 -0500

Multifunctional EZM-4450 (1/16 DIN), EZM-7750 (1/8 DIN), EZM-4950 (1/8 DIN), and EZM-9950 (¼ DIN) can count up on 1 or 2 channels or subtract one from the other. Equipped with two 6-digit displays and on-board sensor power supply, products accept NPN, PNP, encoder, or dry contact input signals; have 2 set points, and communicate via RS-232 serial communication (MODBUS) or optional RS-485. Time range is programmable from 0.01 sec to 999.99 hr.

This story is related to the following:
Test and Measuring Instruments
Timers and Clocks

Search for suppliers of: Electronic Timers | Electronic Counters

Tally Counter is offered in add/subtract version.

info@productnews.com (ThomasNet News) — Fri, 04 Mar 2005 07:38:02 -0500

Electronic 4-digit Hand Tally provides audible beep, which can be turned on or off, to signal each count and help prevent miscounts. Manufactured from impact-resistant plastic, counter features all-electronic components, with no moving parts to wear. Unit is suited for applications where items need to be counted and recorded, such as occupancy, inventory control, attendance monitoring, traffic recording, and lab work.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Counters

Hour Meters and Event Counters are Palmâ"¢ compatible.

info@productnews.com (ThomasNet News) — Fri, 22 Oct 2004 07:57:10 -0500

Designed to MIL-M-7793/14, solid-state, panel-mount DDS200 Series lets users monitor and store warranty or maintenance data. Model DDS200 records time that power has been applied up to 99,999.99 hr, while Model DDS201 Event Counter records number of times power has been applied for at least 5 sec up to 9,999,999 counts. Both can be interrogated using DDR-1 Palmâ"¢-based reader, which allows user to take reading, log and store information, and synchronize files with desktop computer.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Event Counters | Hourmeters

Electric Counter features 8-digit display.

info@productnews.com (ThomasNet News) — Wed, 01 Sep 2004 07:58:04 -0500

Tamper-proof Series E8B provides 1,500 counts per minute and life count of 10 million. Voltage may be applied to count coil continuously without causing damage. Connecting with 22 AWG leads from bottom of counter, unit may be panel, base, rear, or PC mounted. Operating temperature is -25 to 65°C. Counter is UL, CSA, and CE recognized, and is interchangeable with 6-digit counter E6B.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electric Counters

Electronic Counter is suited for inventory control.

info@productnews.com (ThomasNet News) — Tue, 20 Jul 2004 07:43:37 -0500

Manufactured from impact-resistant plastic, Model E2 electronic 4-digit Hand Tally counter has no moving parts and produces audible beep that signals each count in order to prevent miscounts. Product is suited for any application where items need to be counted and recorded. Specific uses include inventory control, attendance monitoring, traffic recording, and lab work.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Counters | Hand Tally Counters

Hand-Held Event Timer synchronizes with GPS timing.

info@productnews.com (ThomasNet News) — Fri, 09 Jul 2004 07:37:05 -0500

GPS Synchroniser units connect to equipment that provides logic output in order to give time stamp to events using GPS timing as reference. Units can be used individually to derive absolute independent event time or in groups to compare timing of different remote events. Products feature backlit display and store results in 512 last in/first out non-volatile buffer that can then be read out using RS-232 serial cable. Time resolution is 1 microsecond, and accuracy is ±2 microseconds.

This story is related to the following:
Test and Measuring Instruments
Timers and Clocks

Search for suppliers of: Event Counters | Timers

Battery-Powered Flow Totalizer offers multi-year operation.

info@productnews.com (ThomasNet News) — Mon, 21 Jun 2004 07:53:53 -0500

Signet 8150 uses standard lithium batteries, suitable for remote or mobile installations where access to line power is limited. Unit is offered with 3 totalizers; 2 are resettable for long and short term monitoring and third is permanent. Four-button keypad and intuitive software allow menu-driven operation, while security access code prevents unwanted changes. LCD displays flow rate and total flow volume simultaneously. Integral and panel-mounted styles are available.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers

Ratemeter/Totalizer includes setup and monitoring software.

info@productnews.com (ThomasNet News) — Tue, 17 Feb 2004 07:51:24 -0500

Model BATRT-M features 5 digits of rate and 8 digits of total. Instrument can be powered from internal battery, external DC supply, or 4â�"20 mA output loop, and accepts magnetic pickup, DC pulse, and switch-closure inputs. Software lets users create, save, open, download, upload, and print setup information for instrument, as well as view rate and total on PC. BATRT-M is rated for -22 to +158°F operation with accuracy of 0.01% of reading ±1 count.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Totalizers | Ratemeters