ThomasNet Industrial Newsroom -

Surface-Mount, Portable Counter takes on-the-spot inventory.

info@productnews.com (ThomasNet News) — Wed, 21 Oct 2009 08:42:11 -0500

Supplied inside aluminum carrying case, MegaXP portable component counter can be used for incoming/outgoing order verification or off-premises inventory taking. It will count as fast as operator can turn hand crank, up to 10,000 cph, and employs rechargeable battery-powered sensor. In addition to RS-232 link to optional adhesive label printer, unit comes with built-in accessories compartment contains hand crank, battery charger, and shoulder strap.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Counters | Parts Counters

Quadrature Counter IC offers multi-mode programmability.

info@productnews.com (ThomasNet News) — Mon, 27 Jul 2009 08:30:20 -0500

Operating over voltage range of 3-5.5 V, 32-bit Model LS7366R with SPI decodes and counts quadrature clocks directly from incremental encoders, offering solution to position and displacement tracking at 40 x 106/sec line rate from encoder and count limit of 232. Unit can also operate with non-quadrature clock signals and provides various counting modes for signal conditioning. Programming and communications between IC and host controller are made with 4 instructions.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Integrated Circuits (IC) | Programmable Counters

Mold Counter monitors mold operation and validates data.

info@productnews.com (ThomasNet News) — Fri, 12 Jun 2009 08:30:46 -0500

Using non-resettable, mechanical, 7-digit counter, CounterView records accurate number of mold cycles, and relies on sensor that detects when mold has closed. Each mold cycle triggers display to increase or decrease counting mechanism based on user preference. CounterView also validates process monitoring data and assists mold maintenance procedures. Operating to 250°F, product is available in inch and metric standards and features glass-filled nylon housing.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Mechanical Counters

Digital Device functions as timer, counter, and tachometer.

info@productnews.com (ThomasNet News) — Thu, 26 Mar 2009 08:27:34 -0500

Series LCT216 features easy to read display that shows both desired set point and current process value, along with operating mode that control is functioning in. Unit also offers 14 pre-programmed timer functions, and counting functions include 1- or 2-stage counting along with batch, total, or dual counting modes. When used as tachometer, device is able to measure rotational speeds.

This story is related to the following:
Timers and Clocks
Test and Measuring Instruments

Search for suppliers of: Timers | Digital Tachometers | Counters

Totalizer calculates and displays flow rates/totals.

info@productnews.com (ThomasNet News) — Mon, 02 Mar 2009 08:30:26 -0500

Model RT20 calculates and displays flow rates and totals from flowmeters with pulse, sine wave, or frequency outputs. Available as battery operated or externally powered device, it features 6 digit LCD total, 8 digit cumulative, and 5 digit rate display. Housed in IP66/67 rated aluminum field- and panel-mountable housing, product also includes scaleable universal pulse or frequency inputs, scaled pulse output, non-volatile memory and reverse polarity protection.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers

Universal Counter offers multiple measurement functions.

info@productnews.com (ThomasNet News) — Tue, 17 Feb 2009 08:32:56 -0500

Featuring 12 digits of frequency resolution and 40 ps of time interval resolution, Model 1105 offers built-in statistics and math functions that may be used when analyzing display mean, min/max, delta, and standard deviations. Real-time DSP accelerates measurement, while scale and offset can be used to compensate for systematic occurrences. Measurement capabilities cover Rise/Fall Time, Phase, Event Count, Voltage Peak, Time Interval, Frequency (6 GHz), Pulse Width, and Duty Cycle.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Measuring Instruments | Testing & Recording, Electric Measuring Instruments | Counters

Time-to-Digital Converter offers 5 picosec timing resolution.

info@productnews.com (ThomasNet News) — Wed, 03 Dec 2008 07:46:31 -0500

Model U1050A-002 of U1050A line of Acqiris time-to-digital converters has measurement range of up to 20 sec and ratio of 1:4.109. Module can operate in either single-start or multi-start acquisition modes with timing information on all 13 independent channels encoded relative to common channel. Time measurement on unit can be based on either internal low jitter of less than 3 ps rms, high stability of ±2 ppm clock source, or external 10 MHz reference input.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Module Timers | CompactPCI Computer Boards | Digital Signal Converters | Event Counters

Rate Indicator/Totalizer uses HART communications protocol.

info@productnews.com (ThomasNet News) — Wed, 27 Aug 2008 07:33:40 -0500

Compatible with Hoffer turbine flowmeters and other frequency producing flowmeters, HRT1 rate and total indicator features 20-point linearization, scaled pulse output, and 4-20 mA loop powered analog output. HART® protocol allows communication with processor via software or handheld communicator, enabling settings adjustment and diagnostic checks. Other features include rate, total, and grand total display as well as 2 optional alarm outputs configurable for rate and total.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Flow Totalizers | Flow Indicators

Wireless Pulse Counter replicates utility meter outputs.

info@productnews.com (ThomasNet News) — Mon, 04 Aug 2008 07:51:58 -0500

Designed for energy management, submetering, building systems monitoring, and demand response applications, wireless pulse counter replicates pulses of up to 4 m and has transmission range of up to 3,500 ft. It supports both alkaline and lithium batteries for extended battery life in extreme temperature environments. Device resists RF interference with frequency agility, which enables unit to change frequencies rapidly whenever it encounters interference.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: Wireless Transmitters | Pulse Counters

Electromechanical Hour Meters have totally sealed housings.

info@productnews.com (ThomasNet News) — Fri, 20 Jun 2008 07:38:30 -0500

Offered in variety of totally sealed SAE and NEMA 4X, 12 compliant housings in both ac and dc voltages, Models 722/732 Electromechanical Hour Meters operate in any environment. Rugged unit is suited for use in variety of industrial ac/dc applications, such as control panels, generators, and outdoor power equipment.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Hourmeters | Electromechanical Counters

Optical Detection System records vehicle passenger counts.

info@productnews.com (ThomasNet News) — Fri, 02 May 2008 07:58:09 -0500

Providing means for statistical or data interpretation, PCN-1001 performs bi-directional detection and counting of passengers in public transportation vehicles. Non-contact stereoscopic vision detection, along with interpretation algorithm, result in counting accuracy over 97% across all lighting conditions. Parallel operation of multiple counters in daisy-chained configuration is possible, and counters can work together in real-time with overlapping areas and active detection.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Traffic Counters | People Counters | Automatic Counters

Electronic Hand Tally has 5-digit display.

info@productnews.com (ThomasNet News) — Thu, 27 Mar 2008 07:53:56 -0500

Powered by replaceable internal battery and measuring 3.65 x 2.20 x 0.80 in., Series L17 Electronic Hand Tally counts both up and down and can be reset with push of button. Audible sound option to signal counting can be turned on and off, and battery will last approximately 2 yr with sound turned off.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Counters | Hand Tally Counters

Light Grid Sensors can detect 2 mm sized objects.

info@productnews.com (ThomasNet News) — Thu, 27 Mar 2008 07:53:55 -0500

Suited for part counting and leading edge detection on conveyors, HLG Light Grid Sensors are through-beam style switching light grids that do not need any external controller box. Units come in rugged aluminum housing which can withstand punishing industrial environments. Cable synchronization provides quick setup and product detection, while teach-in automatic sensitivity adjustment allows for detection of translucent objects and wrappings for precise detection.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Parts Counters | Through-Beam Sensors

Signal Level Meter covers 46-860 MHz frequency range.

info@productnews.com (ThomasNet News) — Mon, 11 Feb 2008 07:41:54 -0500

Designed for CATV system maintenance, Model GAO2002 measures 160 x 130 x 65 mm, weighs 368 g including battery, and offers more than 6 hr operating time. Signal level meter supports Level, V/A, Tilt, and Trunk Level testing as well as testing 2 channels at same time. It features level measurement range of 20 dBµV to 50 dBV with accuracy of ±2 dB and 0.5 dB resolution, 20 dBµV to 50 dBV carrier-to-noise (C/N) option range, and voltage input range of 1-100 V (ac/dc) with ±2 V accuracy.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Frequency Meters

Signal Level Meter is designed for CATV system maintenance.

info@productnews.com (ThomasNet News) — Fri, 01 Feb 2008 07:44:58 -0500

With 160 x 130 x 65 mm size and less than 600 g weight, Model GAO1001 simultaneously supports 2-channel Level, V/A, Tilt, and Trunk Level testing. It features operating time of more than 6 hr, frequency range of 46-864 MHz, tuning resolution of 50 kHz, and ±50 ppm accuracy. Shockproof device has level measurement range of 30-120 dBV with accuracy of ±2 dB at 25°C and 0.5 dB resolution, and voltage input range of 1-100 V (ac/dc) with ±2 V accuracy and 1 V resolution.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Electronic Meters | Frequency Meters

SMD Parts Counting System facilitates year-end inventories.

info@productnews.com (ThomasNet News) — Tue, 27 Nov 2007 07:54:08 -0500

Comprised of motorized surface mount parts counter, bar code reader, and laser label printer, 2000 Pro will process 7 or 13 in. reel containing 5,000 taped parts with pitches of 2-32 mil in approximately 90 sec. System cuts time-consuming task of inventory tallies by providing almost immediate read-outs and printouts. Users can detect shortages by scanning bar code on reel, verifying count, then printing new bar code identity label with current quantity, date, and time.

This story is related to the following:
Automatic ID
Computer Hardware and Peripherals
Labels, Tags, Signage and Equipment
Machinery and Machining Tools
Test and Measuring Instruments

Search for suppliers of: Barcode Readers | Counting Machinery | Parts Counters | Laser Printers | Label Printers

Parking Equipment counts number of vehicles entering/exiting.

info@productnews.com (ThomasNet News) — Thu, 15 Nov 2007 07:49:16 -0500

Red Storm can detect when a vehicle enters, exits, or moves from level to level in any parking facility, and incorporates signs that display available spaces in real time. Fully scalable, upgradeable, wireless differential counter can be configured to fit layout of any parking facility and and accommodate any traffic flow. Installation package includes 4 sensors/zone, one Red Storm control unit/zone, and optional signs including Overspeed, Caution Vehicle Exiting, and Car Coming signs.

This story is related to the following:
Display and Presentation Equipment
Test and Measuring Instruments
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Directional, Stop & Warning Automotive Signals | Traffic Counters

Digital Counter includes key-chain and wrist-strap.

info@productnews.com (ThomasNet News) — Mon, 12 Nov 2007 07:49:19 -0500

Key-Chain/Wrist-Strap/Carabiner Digital Counter features display count to 99,999, 2 yr constant use battery, water-resistant O-ring sealed with shock-resistant ABS plastic case, button click for count confirmation, and recessed no accident reset. Weighing less than 1 oz, it has diameter of 1-7/8 in. and is ½ in. wide.

This story is related to the following:
Test and Measuring Instruments

Large Digit Displays can be viewed from up to 160 ft away.

info@productnews.com (ThomasNet News) — Fri, 09 Nov 2007 07:41:37 -0500

Available for analog, pulse, and serial data signals, G04 Series Large Digit Meters, Counters, Timers and Serial Input Displays come with oversize 4.0 in. digits for long distance viewing in any plant or outdoor environment. Number of digits is 5 for analog or rate signals for readings from -19999 to 99999, and up to 7 for totalizing or for use as serial input remote display with readings from -1999999 to 9999999. Elapsed timer and time-of-day clock configurations are also available.

This story is related to the following:
Display and Presentation Equipment
Test and Measuring Instruments
Timers and Clocks

Search for suppliers of: Digital Timers | Electronic Displays | Digital Meters

Signal Level Meter covers 5-870 MHz range.

info@productnews.com (ThomasNet News) — Wed, 07 Nov 2007 07:47:57 -0500

Offering features suited for professionals in CATV industry, DS1151 (B) Super Signal Level Meter is capable of measuring and displaying amplitude at predefined frequency or carrier. Peak-hold level measurement feature in LEVEL and SPECTRUM mode can detect occasional disturbance, and unit is capable of testing analog, digital (QAM), and FM channels. It also supports C/N measurement, voltmeter functions, spectrum analysis, auto test, and data logging.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Data Loggers & Data Logging Equipment | Frequency Meters