ThomasNet Industrial Newsroom -

Device Server measures 55 x 30 x 24 mm.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Sep 2008 07:36:09 -0500

Requiring 3.3 V power source to operate, NET232 jr features RJ45 Ethernet port on one side and short RJ45 serial cable on other side. Serial-to-Ethernet adapter includes built-in webserver as well as notification capability upon triggered events. Device is set by default to obtain IP address automatically if user has DHCP service running on network. If static address is needed, user can access web configuration and make changes required.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

RJ45 Ethernet Connectors offer tool-free installation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:35:01 -0500

Featuring built-in strain relief and full shielding for each cable assembly, 2-piece RJ45 Ethernet Connectors can terminate 4-8 wires and do not require any cable stripping or crimping for tool-free installation. Full 8-wire termination of 22-26 AWG conductors result in 10GIG performance, in addition to 10/100 and GigE. Each connector comes with color wire diagram so technicians can wire connector for TIA-A, TIA-B, and Profinet wiring types.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RJ-45 Connectors | Ethernet Adapters

Interface Module suits machine vision and instrument control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:19 -0500

Offering 2 Gigabit Ethernet ports with up to 1,000 Mb/s transfer speeds per port, NI 8234 features x4 PCI Express interconnect, providing up to 1 Gb/s bandwidth for real-time data streaming from single PXI Express slot. Compatible with GigE Vision camera interface for machine vision applications, NI 8234 delivers high-speed image transmission for standard cabling at distances up to 100 m. Module is also suited for LAN and LXI instrument control applications using dedicated private networks.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Ethernet Adapters

Adapter connects drives to PROFINET IO/Modbus TCP network.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:36 -0500

By facilitating and accelerating connectivity of ABB drives to PROFINET IO or Modbus/TCP network, RETA-02 Ethernet Adapter makes it possible to send control commands as well as motor speed/torque reference to drive. It also enables sending of process actual value or process reference to drive's PID controller and lets users read status information and actual values from drive, change drive parameter values, and reset drive fault. Adapter snaps into drive in seconds.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

Single-Port Injector meets IEEE 802.3at specifications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 14 May 2008 07:48:36 -0500

Delivering 33.6 W of power on single Ethernet port, Model POE36U provides fully compliant detection, disconnect, and voltage control. Adapter is Gigabit-compatible and incorporates diagnostic LEDs as well as overvoltage, over-current, and short-circuit protection. Featuring layer 1, 2 finger classification, device is suited for IP telephones, wireless network access points, Bluetooth access points, access controls, security cameras, IP print servers, and biometric sensors.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Ethernet Adapters | Power Supplies

Dual 10GBASE-KR PHY upgrades backplanes to 10 GbE rate.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:09 -0500

Designed on 65 nm CMOS process, BCM8073 dual serial 10GBASE-KR-to-XAUI backplane PHY enables 10, 2.5, and 1 Gigabit Ethernet on existing backplane infrastructures. It extends life of existing systems that use 4 lanes to carry 10 Gbps (XAUI) data rates by providing 4X bandwidth improvement per channel. Featuring DSP-based architecture with fully adaptive datapath, 1.2 W solution can drive over 40 in. of FR-4 with 3 backplane connectors.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Integrated Circuits (IC) | Ethernet Adapters

Ethernet to Instrument Interface complies with VXI-11.3.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:17 -0500

Model 8055 adapts GPIB instruments to Ethernet-based test systems, enabling access to these newly made VXI-11.3 instruments from any computer with NIC interface or over TCP/IP network. Used as external box or mounted inside instrument, VXI-11.3 compliant server enables instruments to be controlled by programs running in Windows and UNIX/LINUX OS. It supports reverse channel Service Request messages, as well as supporting multiple clients as part of its standard firmware.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Networking Accessories | Ethernet Adapters | Remote Access Servers

Ethernet Adapters help offload network TCP processing.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Apr 2008 07:44:22 -0500

T3 Unified Wire Adapters are 10 GbE units that utilize TCP/IP offload engine (TOE) technology supporting Microsoft® TCP Chimney architecture, which allows Windows® OS to offload network TCP processing from CPU to network controller. They also free up memory bandwidth for processing of applications. Product addresses performance acceleration requirements of CIFS, iSCSI, and general networking applications.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

Magnetic Jacks suit high-speed communications applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:41:09 -0500

Available with or without LEDs, Magnetic Jacks offer current ratings of 1.5 A and voltage ratings of 150 Vac. RJ45 connectors are most commonly used for 10/100 and 1000Base-T Ethernet applications. Additional uses include networking routers, switching hubs, set-top boxes, printers, and networking adapters/LAN cards.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RJ-45 Connectors | Ethernet Networking Accessories | Ethernet Adapters

RJ45 Ethernet Module connects 8 data lines.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Mar 2008 08:19:40 -0500

Fulfilling Cat 5e requirements, shielded Han RJ45 Ethernet Module comes in male and female parts, both protected by plastic collar. Female module is designed as gender-changer with two RJ45 jacks, while male module accepts standard or overmolded RJ45 patch cords.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RJ-45 Connectors | Category 5 Connectors | Ethernet Adapters

Mezzanine Card delivers 10 GbE unified wire connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:43 -0500

Designed to enable server networking, storage networking, and clustering on HP BladeSystem c-Class, S320EM-BS 10 GbE Unified Wire expansion card has PCI Express interface. T3-based Unified Wire Accelerator offloads TCP/IP, iSCSI iWARP, classification, virtualization, and traffic management processing from host system, can transparently run InfiniBand applications, and offers sockets acceleration capability. It consumes 14.5 W under line rate full duplex traffic using standard frames.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

Ethernet Storage Adapter supports SFP+ optical modules.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jan 2008 07:07:34 -0500

Model S310E-SR+ 10 GbE Storage Accelerator allows use of passive SFP+ copper cables to connect servers to switch within rack, and SFP+ SR or LR optics to connect top-of-rack switch to core. Single-port 10GBASE-SR 10 GbE adapter features PCI Express host bus interface optimized for storage and unified wire applications. On-board hardware offloads TCP/IP, iSCSI, and iWARP RDMA processing from its host system to free up host CPU cycles.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

Mini-Board Ethernet-enables USB devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Nov 2007 07:54:45 -0500

Equipped with built-in ARM7 controller, UHC122-based Model ASRB-USB network-enables USB devices such as printers and barcode scanners. USB-to-Ethernet Gateway Module is built on WIZnet's fully-hardwired TCP/IP stack chip W3150A+. Featuring USB Type A socket and auto-sensing 10/100 Mbps Ethernet interface that supports DHCP, RoHS-compliant device is powered by 5 V and is designed to overcome 5m/15 ft USB cable length limitation.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Gateways | Universal Serial Bus (USB) Adapters | Ethernet Adapters

Single Port PoE Adapter provides up to 80 W of power.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Nov 2007 07:47:56 -0500

Model POE80U is designed for powering satellite receivers, video conferencing systems, access points, LCD displays, security cameras, kiosks, and computer workstations. Gigabit-compatible device incorporates diagnostic LEDs and features single-source 4-pair power current sharing. Voltage detection, disconnect, and control is included and unit offers overvoltage, overcurrent, and short-circuit protection.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Supplies | Ethernet Adapters

Serial-to-Ethernet Server enables flexible operability.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 Nov 2007 07:48:02 -0500

Suited for applications involving serial devices where control is needed, JNIOR-310 Ethernet-I/O Platform allows any RS232/RS422/RS485 serial device to communicate via Ethernet. Collection of digital and analog data as well as serial device communications on one platform with one IP address delivers operational flexibility. With this solution, data from serial device can be monitored, and digital output relays can be switched based on that serial data.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Ethernet I/O Devices | Ethernet Adapters | Communication Adapters

GigE to Fiber Optic Converter extends Ethernet connections.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:07:21 -0500

Combining 1,000 Mbps speed of Gigabit Ethernet (GigE) with EMI/RFI noise immunity and electrical isolation of fiber optic cable, EKI-2741 Series Gigabit Industrial Ethernet Media Converters enable GigE connections spanning up to 70 miles. All units include Link Fault Pass-through, which allows cable breaks or power failures to be signaled to attached devices. Supplied in DIN-rail mount metal chassis, series features dual 12-48 Vdc power inputs and 3,000 V power line surge protection.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Converters | Ethernet Adapters

Processor Module is designed for WSN gateway applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Aug 2007 07:54:16 -0500

DIL/NetPC ADNP/9200 connects Ethernet LANs to wireless sensor networks (WSNs). In addition to Ethernet, UART, SPI, SSI/I2C, and USB, miniature module also supports IEEE 802.15.4, ZigBee, Bluetooth, IEEE 802.11 WLAN, and other WSN wireless standards. There are 20 universal GPIO signals available and two 10/100 Mbps Ethernet LAN interfaces with separate MAC and PHY layer that function completely independently from each other. Expansion sandwich layer is used for WSN integration.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Devices | Ethernet Adapters

Unified Wire Adapters suit Gigabit Ethernet networking.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Jun 2007 07:41:03 -0500

Powered by T3 technology, Models S302E, S304E, and S302X multi-port 1 GbE adapters with PCI-Express and PCI-X are optimized for storage accelerator applications. Unified wire adapters enable convergence of storage, clustering, and server networking applications onto single unified fabric. Capable of driving active CX4 cables, Model S320E-CX 2-port 10 GbE storage accelerator comes with PCI-Express host bus interface and CX4 copper connection.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Communication Adapters | Ethernet Adapters

Ethernet Adapter suits IBM BladeCenter enterprise servers.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 May 2007 08:20:12 -0500

Enabling server networking, storage networking, and clustering on single platform, Model S320em-bc dual-port, 10 GB Ethernet adapter has PCI Express interface optimized for storage applications. T3-based card offloads TCP/IP, iSCSI, and iWARP RDMA processing from host system, freeing up host CPU cycles for other applications. Consuming only 16 W, unified wire accelerator can run InfiniBand applications on Ethernet, and offers integrated traffic manager and classification engine.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Ethernet Adapters

Ethernet Adapters are based on IEEE 802.3an interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Feb 2007 07:02:48 -0500

Featuring dual-speed, auto-negotiating 1 GbE/10GbE port, Models S310e-BT and N310e-BT enable 10 Gb transmission and support PCI-Express host bus interface. Storage adapter Model S310e-BT is powered by TeraPHY(TM) TN1010 transceiver and T3 ASIC, which fully offloads TCP/IP, iSCSI, and iWARP RDMA processing from host system. With N310e-BT offload server adapter, enterprises can connect servers and storage systems directly to 10GbE backbone switching infrastructure using RJ-45 connectors.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Ethernet Adapters | Adapter Cards