ThomasNet Industrial Newsroom -

Particle Size Analyzer automates sieve analysis process.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:36 -0500

Using ASTM approved 8 in. round test sieves, full or half-size height, GRADEXÂ® 2000 can analyze individually loaded as well as multiple samples staged for continuous testing. It shakes and taps samples by using preset test configurations, classifies and weighs each sieve fraction, calculates and stores weight values, and reports data to PC. With 5,000 g balance capacity and 0.1 g balance resolution, unit is suited for processing dry granular materials.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers | Particle Size Testers

Phosphate Analyzer offers 0-15 ppm accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:18 -0500

Navigator 600 Phosphate analyzer features comprehensive on-board diagnostics and predictive maintenance functions, offering 3 months of unattended operation. It comes in single or multi-stream configurations, enabling sequential monitoring of up to 6 streams, and can be programmed for continuous or sampled measurements. Remotely manageable unit offers output signals of 4-20 mA, Ethernet, and optional Profibus DP V1, and comes with 2 GB removable SD card.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Process Analyzers | Particulate Analyzers

Gap-Free Classifier eliminates metal contact.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:14 -0500

Vibroscreen Gap-Free Classifier offers non-metallic material contact surfaces and quick-cleaning features designed to eliminate contamination of ultra-pure products. This 60 in. dia unit is configured with 3 screening decks for removing oversize particles and de-dusting material, while separating on-size material into 2 size fractions. Other features include gap-free screen frames, quick-release U clamps, radius corners, domed lid, and continuous ground and polished welds.

This story is related to the following:
Chemical Processing and Waste Management
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Test and Measuring Instruments

Search for suppliers of: Separating Machinery | Screening Machinery | Classifiers

Particle Size Probe supports pharmaceutical regulatory compliance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Apr 2008 07:45:44 -0500

Parsum IPP-70 is offered with Option 1, which allows for provision of Installation/Operational Qualification (IQ/OQ) documentation together with verification kit for checking measurement accuracy, while Option 2 offers unit with polished contact surfaces and includes material traceability documentation. Suited for pharmaceutical applications, probe delivers size and velocity measurement for particles, granules, and pellets from 50-6,000 microns in dia.

This story is related to the following:
Test and Measuring Instruments

Particle Characterization System features sample dispersion unit.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Mar 2008 08:14:15 -0500

With software-controlled dry powder sample dispersion unit that offers safe handling of hazardous substances, Morphologi G3 delivers statistically significant data through rapid analysis of particles, with little or no user intervention. Measurements are made in enclosed sample carrier, minimizing environmental exposure and ensuring safe material handling, especially when measuring pharmaceutical actives or toxic materials.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Classification | Particle Size Analyzers

Ambient Particulate Monitor has touchscreen user interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Dec 2007 07:51:24 -0500

TEOM Series 1405 comes in 4 models providing ome to three PM measurements, PM-10, PM-2.5 (Fine), and PM-Coarse (PM-10-2.5), and FDMS option is available to account for volatile and semi-volatile fraction. Each model is delivered with network-ready configuration with user interface that allows access to system and TEOM data, settings, and instrument conditions. System's default data output consists of a running 1 hr and 24 hr average mass concentration updated every 6 minutes.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Particulate Particle Monitors | Air Quality Analyzers | Ambient Air Analyzers | Particulate Analyzers

Particle Size Analyzer captures and processes data.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 Nov 2007 07:42:55 -0500

Designed to measure spray particle size distributions, Spraytec(TM) includes software with ensemble averaging feature, which enables researchers to detect time-points in repeat spray actuations where atomization process is most variable. Third party software interface allows other measurement systems to run SOPs and to download results remotely. Facility to convert from volume- to number-based particle size distributions enables comparison of data with measurements from other methods.

This story is related to the following:
Software
Test and Measuring Instruments

Search for suppliers of: Data Collection Software | Particle Size Analyzers

Particle Size Analyzer enables mobile operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 Nov 2007 07:42:40 -0500

Built for single person operation, InsitecÂ® Voyager can be dismantled for transportation and assembled without hand tools. Laser diffraction-based unit is suited for dry streams with particles ranging from 1-1,000 microns. Able to measure particle size up to 4 times/sec, analyzer can be operated at- or on-line, providing continuous stream of real-time data. Device is suited for production facilities with multiple lines for commissioning, optimization, and troubleshooting.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers

Particle Size Analyzer operates anywhere it is required.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Nov 2007 07:54:07 -0500

Built for single-person operation, InsitecÂ® Voyager enables mobile particle size analysis within process environment. This laser diffraction-based particle size analyzer accommodates dry streams with particles from 1-1,000 microns. It measures particle size up to 4 times per second, providing continuous stream of real-time data for optimal control and understanding. Offering multiple communications options, solution can be operated at- or on-line.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Sizing Instruments | Particle Size Analyzers

Particle Analyzer delivers fully automated operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Oct 2007 07:57:26 -0500

Offering range of options for visualization and data analysis, MorphologiÂ® G3 provides microscope-quality images and statistically significant particle size and shape information. Analytical tool produces 20 different parameters describing size and shape for every particle measured, and software control of dispersion parameters ensures reproducible dry powder dispersions. Features include automated dry sample dispersion device, enclosed sample handling, and interactive scattergram.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers

Particle Imaging/Analysis System is designed for mobility.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Oct 2007 07:47:41 -0500

Featuring particle imaging and analysis tools, Portable FlowCAMÂ® automatically takes Hi-Res, digital images of individual particles/cells in fluid and measures parameters in real-time. Images and data are saved, along with time and date of collection, for further analysis. On-site customization lets users target specific cells/particles while omitting non-target cells/particles by adjusting mode of operation, magnification, flow rate, and other settings.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers

Water Sample Test Kit determines particulate contamination.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Sep 2007 07:43:51 -0500

Patch Test Kit offers necessary tools for determining levels of water and solid particulate contamination present in fluid samples. Along with Schroeder vacuum pump, kit features membrane patch that collects residual dirt for examination under microscope. Sample can be compared to photos of known contamination levels in included Contamination Handbook for visual assessment. Included water sensing device consists of aluminum mixing vessel with built-in LCD and microprocessor.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Particulate Detectors | Particulate Analyzers

Homogenization Laboratory performs material analysis.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Jun 2007 07:44:25 -0500

Process Test Laboratory solves particle size reduction challenges by using wet-mix process systems for high- and low-shear mixing of emulsions and dispersions. Able to be scaled-up to any production requirements, system provides complete product testing for purpose of manufacturing specific products that require precise homogenization. In-line dynamic wet mixers or colloid mills are employed to match application for particle size reduction, deagglomeration, and blending needs.

This story is related to the following:
Test and Measuring Instruments
Services
Food Processing and Preparation

Search for suppliers of: Homogenizers | Particle Size Testing Services | Particle Sizing Instruments

Automated Analyzer measures particle size/shape in toners.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Jun 2007 07:48:38 -0500

Sysmex FPIA-3000 measures particles from 0.8-300 microns and provides size and shape information for each. Using CCD camera, system produces images of each particle and provide scattergram of shape index versus particle size within 2.5 min. Camera captures 60 images/sec and analyzes them in real-time. To ensure largest area of particle is oriented toward camera and all particles are in focus, sheath flow cell transforms particle suspension into narrow or flat flow.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers

Particle Analysis System images plastic resin particles.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Apr 2007 07:47:06 -0500

Able to detect particles from .5 Âµm to 5 mm in size, FlowCAMÂ® takes full-color digital images of every individual plastic flake, granule, and powder in sample to verify and document that batch or shipment of material meets quality specifications. System measures size, length, width, shape, and fluorescence as well as intensity, transparency, color, and roughness. FlowCAM saves each particle image with corresponding data set in spreadsheet and interactive scattergram format.

This story is related to the following:
Test and Measuring Instruments

Particle Size Analyzer automates sieve analysis process.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Jan 2007 07:10:03 -0500

Using ASTM-approved 8 in. round test sieves, PC-controlled GRADEXÂ® 2000 analyzes individually loaded samples and multiple samples staged for continuous testing. System shakes and taps samples with same stroke and frequency as manual shakers. It classifies and weighs each sieve fraction, calculates and stores weight values, and reports data in format compatible with Windows-based QC/SPC software. GRADEX 2000 has balance capacity of 5000 g and balance resolution of 0.1 g.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Size Analyzers

Particle Analyzer features 23 measurement parameters.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Dec 2006 07:46:57 -0500

FlowCAMÂ® particle analyzer images every particle in discrete fluid sample or continuously in process. Each image is saved in full color with corresponding data set in spreadsheet format or in interactive scattergram for review and analysis. Measurement parameters include intensity, transparency, color, ESD volume, ABD volume, compactness, roughness, and elongation, along with particle length, width, aspect ratio, and other traditional measurement parameters.

This story is related to the following:
Test and Measuring Instruments
Vision Systems Sponsored by: Keyence Corporation of America - The Internet Resource for Machine Vision Solutions

Search for suppliers of: Particle Size Analyzers | Digital Imaging Systems

Separation System is used for protein and bipolymer analysis.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Dec 2006 07:43:42 -0500

Based on asymmetrical Flow Field-Flow Fractionation, Eclipse system requires only one pump to generate all 3 required flow rates. Samples can be separated according to hydrodynamic radius in selected channel by interacting with cross-flow permeating through bottom wall. Developed for pharmaceutical industry, unit can characterize antibody preparations with respect to aggregation and identify impurities/contaminants at lower detection limit.

This story is related to the following:
Chemical Processing and Waste Management
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment

Search for suppliers of: Particle Size Analyzers | Separators | Laboratory Equipment & Supplies

Separation System is developed for pharmaceutical industry.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Nov 2006 07:43:57 -0500

As alternative to column chromatography for analysis of protein, biopolymer, and colloidal materials, Eclipse is based on asymmetrical flow field-flow fractionation (AF4). System requires only one pump to generate all 3 flow rates required for analysis, and samples can be separated according to hydrodynamic radius. Eclipse characterizes antibody preparations with respect to aggregation and detects low limits of impurities or contaminants.

This story is related to the following:
Chemical Processing and Waste Management
Test and Measuring Instruments

Search for suppliers of: Separators

Particle Sizer features fully automatic operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Oct 2006 07:48:49 -0500

Suited for measuring particle size distribution of powder and latex, Easysizer 2.0 performs all measuring steps automatically after initial parameter setup. Shock- and dust-proof machine, which measures 650 x 465 x 375 mm, is offered with multiple sample feeding systems and features 0.1-500 Âµm measuring range with 1% repeatability. Along with pre-set measurement modes, self-diagnostic unit has 54 detectors and 2.0 mW, 0.6328 Âµm He-Ne laser light source.

This story is related to the following:
Test and Measuring Instruments

Search for suppliers of: Particle Sizing Instruments