ThomasNet Industrial Newsroom -

Universal Programmers enable IC testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:05:56 -0500

Supporting more than 6,000 and 8,000 devices, respectively, Models VP280 and VP380 are capable of handling devices such as PROM, PLD, flash microcontrollers, serial and parallel memory. They are also designed for IC testing, including TTL 74 series, CMOS Logic IC, plus DRAM and SRAM memory devices. Units interface with any laptop, PC, PS/2, or compatibles through USB port. Auto-run mode starts programming automatically upon detection of chip insertion.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: PROM Programmers | Univeral Serial Bus (UBS) Hubs | Universal Serial Bus (USB) Connectors

Memory Development Kit automates cryptic processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Jun 2007 07:43:41 -0500

Model AT88SC-DK1 provides development kit for CryptoMemoryÂ® AT88SCxxxxC series cryptographic memories, covering EEPROM densities from 1-256 Kbits. Included library eliminates need for developers to understand cryptographic processes and algorithms by completely implementing host cryptographic operations required for secure communication. Also included, daughter board adapts CryptoMemory to any existing embedded development environment with 2-wire interface.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: EPROM Programmers | Evaluation Boards

In-Line Programming Solution works with placement machines.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Oct 2006 07:49:54 -0500

Configured for and mounted directly onto Fuji NXT placement machine, ProLINE-RoadRunner(TM) programs flash memory and microcontroller devices and presents them to pick-point of Fuji NXT machine for placement onto circuit board. In-line automated programming feeder minimizes inventory cost while promoting quality standards required in lean and Six Sigma environments with its Just-in-Time programming capability.

This story is related to the following:
Computer Hardware and Peripherals
Material Handling and Storage

Search for suppliers of: Programmers (Excluding Programming Services) | In-Line Feeders

FPGA Programming Tool has 64 MB of internal memory.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Sep 2006 07:38:33 -0500

Silicon Sculptor 3 field-programmable gate array (FPGA) programming tool features high-speed USB 2.0 interface allowing connection of up to 12 programmers to single PC. Leveraging antifuse-based Axcelerator FPGA device, unit offers concurrent programming of highly dense parts. Device supports standard and ARM-enabled versions of ProASIC3 family and Actel Fusion Programmable System Chips.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Programmable Logic Devices | Programmers (Excluding Programming Services)

Device Programming System handles 1,400 devices/hr.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Oct 2005 07:06:13 -0500

Designed for OEM/ODM or programming centers producing small or large batches in high volumes, offline Model PS588 supports Windows XP(TM) and can accommodate up to 48 programming sites from FlashCORE(TM) line, or 12 Universal Optima programmers, to address any device mix. Auto Teach feature automatically finds center of device, facilitating process of setting precision placement of new device package.

This story is related to the following:
Computer Hardware and Peripherals
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Assembly Systems | EPROM Programmers

In-System Programming Solution is designed for production.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Dec 2004 07:44:49 -0500

Flexible, modular ImageWriterâ"¢ enables device programming on any board inside test fixture, helping electronics manufacturers manage production with multiple product configurations for single target board. It is based on open architecture that enables seamless integration with automated test and manufacturing systems and facilitates programming of devices already mounted on circuit board. Product can be controlled directly via ATE signal or from any process control software.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: EPROM Programmers

Device Programmer communicates via parallel or USB port.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Jul 2004 09:25:12 -0500

Universal Device Programmer, Model 866 comes with 48-pin ZIF socket, which eliminates need of adapter for any DIP device up to 48 pins. Buffer features include erase, random data fill, fill block, copy block, move block, swap block, buffer print, find text, replace text, 8-bit and 16-bit view modes, go to address, and checksum calculator. Model 866 is suited for anyone utilizing portable computer to test, repair, program, or re-program electronic device using memory IC.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Computer Testers | Integrated Circuit Testers | EPROM Programmers

Programmers integrate engineering/manufacturing processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2003 07:55:13 -0500

Model PS300FC, PS300, PS200, and PP100 automated programming systems are available with TaskLinkÂ® v5.0 and AH400 v5.0. TaskLinkÂ® v5.0 integrates programming operation throughout engineering, NPI, and manufacturing processes and supports programmable NAND Flash and microcontroller devices. AH400 v5.0 incorporates features such as machine and tape-out speed increases, serialization, and SPC reporting. Programming systems utilize FlashCORE programming architecture.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services)

Automated Programming System provides high throughput.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Dec 2002 07:45:05 -0500

Configured for high-volume, tape-to-tape device programming, PS Infinityâ"¢ Flash programming system tests, programs, and verifies up to 5000 devices per hour. With FlashCORE architecture, system incorporates automated inline, automated offline, and manual programmers. Bundled with high speed handler, unit has 2 configurations that can be implemented to program up to 3000 or 5000 devices per hour.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services)

Programmer offers choice of 4 or 8 programming sites.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Oct 2002 08:38:56 -0500

Universal, multi-socket ProWriterâ"¢ supports gang and set programming for wide range of device types, with support for programmable logic, memory devices, and microcontrollers. Sites can be linked using standard parallel cables to provide up to 48 programming sites, all controlled from one computer. Hands Free feature allows programming to start as soon as device has been inserted into socket and locked into position.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: PROM Programmers | EPROM Programmers

Device Programmer offers in-circuit serial programming.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Oct 2002 08:39:25 -0500

PC Compatible Model 844A has 3,628 device library and offers 40-pin DIP Zero Insertion Force Socket (both 300 and 600 mil). It also provides 1.8 V low-voltage device compatibility and Windows control program with pull-down menus. Able to perform Read, Blank Check, Program, Verify, and Erase commands, Model 844A also includes Buffer features such as Random Data Fill, Copy/Move/Swap Block, Buffer print, Find/Replace Text, and 8- and 16-Bit view modes.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services) | EPROM Programmers

Programming System accommodates up to 12 programmers.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Sep 2002 07:52:34 -0500

Series P300FCâ"¢ automated programming system features FlashCOREâ"¢ technology. It is designed to program high density Flash Memory devices at near theoretical minimum times. System supports standard 4-socket adapters used by ProLINE-RoadRunnerâ"¢ and FlashPAKâ"¢ programmers. It brings benefits of network control and advanced programming architecture to automated Flash programming environments, assuring that programming is current, secure, traceable, and failsafe.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services)

Flash Memory Programmer keeps up with changing needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Sep 2002 07:52:31 -0500

ProLINE-RoadRunnerâ"¢ with Variable Capacity Option removes unprogrammed Flash memory devices from tape, uses FlashCOREâ"¢ archtiecture to program up to 4 devices in parallel, then delivers programmed parts to pick-up point of placement machine. It is available in 1, 2, and 3 site derivative versions and for Universal, Siemens, Fuji, and Assembleon SMT equipment. Derivative versions are field expandable.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services)

Module System speeds drive programming.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Apr 2002 09:15:50 -0500

Electronic Programming Module (EPM) System consists of memory chip that plugs into front of SC Series drive and hand-held EPM Programmer. Programming changes can be made from drive's front keypad, PC, or by plugging drive's EPM into EPM Programmer. Drive profiles can be copied from EPM into Programmer memory. Using EPM Programmer's backlit 16-character LCD display, operator can label and store up to 30 files for later review, editing, or transfer.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: EPROM Programmers

Device Programmer works in field without computer.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Mar 2002 07:48:14 -0500

Model 869 programs, tests, repairs, or re-programs any electronic device using memory IC either connected to computer, or in field without computer. Universal Stand Alone Device programmer has 4,322 device library, which supports PROMs, EPROMs, PLDs, and Microcontrollers. Test capabilities include IC test for TTL and CMOS Logic ICs and Device Insertion Tests. Windows-compatible software interface has pull-down menus and pop-up dialogue boxes.

This story is related to the following:
Computer Hardware and Peripherals
Services

Search for suppliers of: Computer Programmers | Programmers (Excluding Programming Services) | PROM Programmers | EPROM Programmers

Programming System programs high-density Flash Memory.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Feb 2002 07:44:42 -0500

FlashPAK(TM) provides benefits of network control and programming architecture to manual Flash programming environments. Tabletop system has 4 sites for simultaneous programming of up to 4 fine-pitch Flash Memory devices at near theoretical minimum programming times. TaskLink(R) for Windows(R) Supervisor Software monitors FlashPAK work cell, keeping updates on job status, operator performance, device yield and programming data.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Programmers (Excluding Programming Services)

Device Programmer works on 2,500 different devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2001 16:20:28 -0500

Model 848 has library of 2,500 devices and line of socket adapters to interface with almost any IC including PLCC, SOIC, TSOP, DIP, TQFP, SSOP, PSOP, or QFP. It is suitable for anyone who tests, repairs, programs or reprograms any electronic device using a memory IC, including EPROM, EEPROM/Flash, serial EPROM, microcontroller, and PLD systems. It comes with 32-pin ZIF socket that eliminates need for adapter for any DIP device up to 32 pins.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: EPROM Programmers