ThomasNet Industrial Newsroom -

Receivers support up to 500 wireless transmitters.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Feb 2008 07:34:07 -0500

Equipped in compact unit suitable for residential and small commercial security installations, in-line receivers, models 1100DI and 1100XI allow for wireless capability. Suitable for harsh RF environments, high power receivers, models 1100DH and 1100XH increase coverage by offering greater transmission and higher sensitivity for reliable performance in industrial locations. Models provide two-way, supervised communication using 900 MHz frequency hopping spread-spectrum technology.

This story is related to the following:
Communication Systems and Equipment
Controls and Controllers
Safety and Security Equipment

Search for suppliers of: Security Equipment & Supplies | Alarm Control Panels | Surveillance Receivers

IR Receivers suit noisy environments and short burst codes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Feb 2008 07:57:20 -0500

Available in 5 series and 3 pin configurations, AGC3 IR Receivers offer resistance to ESD, shielding against EMI, and immunity against ambient light, making them suited for remote control, data transmission, and light barrier applications. Units include photo detector and preamplifier circuit, mounted within 3-pin epoxy-encapsulated module. Specified for operation from 2.5-5.5 V with transmission range of 45 m, RoHS-compliant modules consume 0.35 mA and feature carrier frequency of 30-56 kHz.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

Infrared Receiver Modules are made for portable systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Oct 2007 07:43:15 -0500

Series TSOP85... infrared receiver modules utilize dual lens and photodiode construction to deliver sensitivity and range to remote control, data transmission, and light barrier applications. Surface mountable module offers broad supply voltage range of between 2.7-5.5 V, and 7 standard carrier frequencies ranging from 30-56 kHz. Device is capable of operating with short-burst transmission codes, at data rates of up to 4,000 bps, and measures 3.3 mm high, and 2.74 mm wide.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

UHF ASK/FSK Receiver ICs suit TPMS and RKE applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 18 Sep 2007 07:48:04 -0500

Supplied in SSO20 package, ATA5723, ATA5724, and ATA5728 can be used to cover respective ranges of 313-317 MHz, 432-436 MHz, and 868-870 MHz. Products support Manchester as well as Bi-phase coding signals and provide logarithmic RSSI output. Manufactured using RF BiCMOS process, solutions offer receiving selectivity optimized via integrated image rejection mixer with 30 dB rejection; -113 dBm sensitivity; as well as integrated IF filter, low-phase-noise VCO, PLL, and loop filter.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Integrated Circuits (IC) | Frequency Shift Keying (FSK) Receivers

IR Receiver Modules feature frequencies from 30-56 kHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Nov 2006 07:53:03 -0500

Housed in Minicast package and available in 3 and 5 V versions, IR Receiver Modules are designed as drop-in replacements for standard small-size modules in remote control applications. Each device includes photo detector and preamplifier circuit, mounted within 3-pin epoxy-encapsulated module with semi-cylindrical lens. Package provides filtering of noise signals from sources such as fluorescent lighting, while internal metal shield maintains immunity against EMI.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

IR Receiver Modules offer pulse-distance coding up to 35 m.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Nov 2006 07:53:03 -0500

Designed to address class of coding protocols using pulse-to-pulse or presence of pulse timing methods, TSOP18238, TSOP19238, TSOP14838, and TSOP12238 devices are specified for operation at 5 V and feature carrier frequency of 38 kHz. Each incorporates photo detector and preamplifier circuit, mounted within 3-pin, epoxy-encapsulated module with integrated lens. Internal AGC circuit provides immunity against optical noise, while internal metal shield protects against EMI.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

DVR replaces VCRs in security system applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Oct 2004 08:13:19 -0500

With on-board networking capabilities for integration into networked systems, self-contained Model WJ-HD220 provides 8 channel inputs plus camera control functionality. It offers 120 Gb recording capacity, pre-alarm screening, time lapse recording, as well as playback and monitoring capabilities. Featuring coax control up to 3,000 feet using Panasonic VD2 for dome camera pan/tilt/zoom operations, DVR also provides electronic zoom with multi-screen or spot monitoring.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Safety and Security Equipment

Search for suppliers of: Security Equipment & Supplies | Digital Video Recorders (DVRs) | Surveillance Receivers

SMD IR Receivers offer variable supply voltage of 2.7-5.5 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Apr 2004 07:53:35 -0500

Miniature, multi-function, Series TSOP36xxx combines photo detector and preamplifier in single package to enable design of remote control systems. Units operate with short burst transmission codes and data rates up to 4,000 bit/s with 7 standard carrier frequencies from 30â�"56 kHz. Automatic Gain Control suppresses ambient light disturbances, and epoxy package doubles as IR filter. With metal shielding, devices are protected against electrical field disturbances.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

IR Receiver Modules have -40 to +90Â°C temperature range.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Oct 2003 08:00:15 -0500

Designed for remote control systems in automotive applications, TSOP48xxxxAM miniaturized, multi-functional IR receiver modules integrate photo detector and preamplifier in one package with internal metal shielding and Automatic Gain Control circuitry. Devices measure 6 x 6.95 x 5.6 mm and include internal band filter that allows PCM frequency operation. Specified for supply voltage of 4.5â�"5.5 V, modules are available in 7 carrier frequencies from 30â�"56 kHz.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

IR Receiver Modules are immune to ambient light disturbances.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2003 07:46:20 -0500

Capable of operating over distances up to 114.8 ft on supply voltages as low as 2.7 V, TSOP3xxxx multi-function IR receiver modules combine PIN diode and preamplifier in one epoxy package measuring 6.95 x 6 x 5.6 mm. Integrated Automatic Gain Control circuitry suppresses light-source disturbances, internal metal shielding protects against electrical field disturbances, and internal band filter allows PCM frequency operation. Maximum data rate is 4,000 bit/s.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Infrared Receivers

Receiver/Transmitter may be battery powered.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 Aug 2002 07:43:09 -0500

Receiver/Transmitter is designed for camera security systems. Multiple antenna inputs for receiver offer true diversity allowing for continued image quality. Broadcast video and audio are available in ISM license free bands. Units are available in UHF and 900 MHz areas as well.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Video Transmitters | Surveillance Receivers