ThomasNet Industrial Newsroom -

Immersion Ultrasonic Testing Service provides flaw detection.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:51 -0500

Using ultrasonic immersion detector, Elektron® Ultrasonix operator can ultrasonically check products to Aerospace Material Specification AMS 2154. Automatic ultrasonic flaw detection within immersion tank removes inherent operator error, enabling repeatable checking of material cleanliness. Supported by K-scan data acquisition and analysis software, machine is custom-built to check both round billet and flat plate or extrusions. Scanning envelope accommodates parts up to 3,000 x 1,000 x 450 mm.

This story is related to the following:
Services
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Inspection Services | Ultrasonic Flaw Detectors | Ultrasonic Testing Services

Ultrasonic Flaw Detectors offer phased array imaging.

info@productnews.com (ThomasNet News) — Mon, 08 Dec 2008 07:46:28 -0500

Designed with horizontal case and sunlight-readable VGA display, EPOCH 1000 Series features 6 kHz max pulse rate frequency with single-shot measurements, tunable square wave pulser, digital receiver, and digital filter sets for signal-to-noise clarity. Phased array imaging allows simultaneous inspection of multiple focal laws and various angles in single scan. Detectors are suited for inspections in oil, gas, and petrochemical as well as power generation, aerospace, and manufacturing.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Detectors | Flaw Detectors

Ultrasonic Flaw Detectors offer flexibility as needs change.

info@productnews.com (ThomasNet News) — Mon, 25 Aug 2008 07:37:28 -0500

Available in 3 upgradeable models, Phasor Flaw Detectors are suited for applications ranging from corrosion monitoring to defect detection and sizing. Portable phased array Phasor XS provides highest resolution and probability of inspection, while mid-level Phasor 16/16 Weld combines phased array and conventional capability and produces full color image scans that can be stored as jpg for remote analysis. Phasor CV offers conventional, single-channel ultrasonic flaw detection.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Detectors | Flaw Detectors

Eddy Current Flaw Detectors feature color display.

info@productnews.com (ThomasNet News) — Thu, 07 Aug 2008 07:46:49 -0500

Phasec 3 is single-frequency instrument for crack and corrosion detection and conductivity and coating measurements, while Phasec 3s adds dynamic rotating inspection capability and Phasec 3d adds dual-frequency capability to 3s for inspection at 2 different depths. Devices feature ¼ VGA TFT display with choice of 8 color combinations to differentiate between stored and active signals. Units have onboard memory for 200 setups and 200 traces, USB connectivity, and battery life up to 6 hr.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Flaw Detectors | Surface Defect Detection Systems

Flaw Detector incorporates EC and ECA technologies.

info@productnews.com (ThomasNet News) — Wed, 09 Jul 2008 07:42:24 -0500

OmniScan® MXE flaw detector offers eddy current (EC) and eddy current array (ECA) technologies used to detect surface and slight subsurface defects in metallic structures. Included MXE v2.0 software offers interface with step-by-step Wizard Assistance Menu that accelerates calibration and setup of application parameters. Alarm features offer flexible setup conditions, and other features include raster scan function as well as seamless switch between EC inspection and ECA inspection.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Flaw Detectors

Handheld Ultrasonic Flaw Detector weighs 2.12 lb.

info@productnews.com (ThomasNet News) — Fri, 09 Nov 2007 07:41:39 -0500

Capable of withstanding wide range of weather conditions and difficult inspection environments, EPOCH LTC comes in IP67-rated sealed case. EN 12668-1 compliant digital ultrasonic flaw detector features square wave pulser, selectable digital filtering, 1-110 dB gain range, peak memory, 0.001 in. measurement resolution, one gate with programmable alarm, and multicolor transflective LCD with full VGA resolution that offers readability from bright sun light to complete darkness.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Flaw Detectors | Ultrasonic Detectors

Composite Inspection Instrument optimizes data viewing.

info@productnews.com (ThomasNet News) — Mon, 01 Oct 2007 07:47:44 -0500

BondMaster 1000e+ is optimized to detect internal defects or delaminations in composite structures used for aerospace, marine, automotive, or manufacturing applications. In addition to sonic pitch-catch, mechanical impedance analysis, and resonance technologies, portable multimode instrument offers dual RUN2 displays that let operator monitor waveform data and flying dot display. Options are available for color and monochrome LCD or electroluminescent display.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Analytical Instruments | Flaw Detectors | Bonding Testers

Ultrasonic Flaw Detector suits aerospace inspections.

info@productnews.com (ThomasNet News) — Fri, 11 May 2007 08:38:43 -0500

To promote effective scanning of composite components and structures, Phasor XS is available with ultrasonic, phased array transducer that features 90% hard water acoustic material and 10% water gap. Portable instrument, compatible with various probes, can operate in conventional and phased array flaw-imaging modes. Latter allows detector to drive arrays with up to 64 elements, using any 16 of them to form virtual probe.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Flaw Detectors

Ultrasonic Detector offers phased array flaw imaging.

info@productnews.com (ThomasNet News) — Mon, 11 Dec 2006 07:59:09 -0500

When used in phased array mode, portable Phasor XS offers up to 64 channels, and operator can electronically multiplex multi-element probe to achieve control over angle of inspection, amplitude, and depth-of-focus of each ultrasonic beam. Inspection image is presented as full color, sector B-scan on TFT screen, providing comprehensive data in real-time. In conventional mode, Phasor XS uses standard ultrasonic probes for traditional inspection, such as corrosion and thickness measurement.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Detectors | Flaw Detectors

Flaw Detectors feature rugged construction.

info@productnews.com (ThomasNet News) — Thu, 26 Oct 2006 07:45:38 -0500

Building on Model 123W, which is used for training organizations, Sitescan Models 150S and 250S have DAC, AVG, AWS, and API sizing techniques. Model 150S includes software features designed to optimize operator accuracy, including advanced measurement modes, full screen waveform display, and automated calibration function.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Flaw Detectors

Flaw Detector suits non-destructive testing applications.

info@productnews.com (ThomasNet News) — Tue, 30 May 2006 08:20:39 -0500

Masterscan 350M and 380M feature acquisition systems with resolution and signal to noise ratio suited for ultrasonic testing. Along with direct daylight-visible, transflective color display, products feature keypad and user interface with full screen A-scan and menu navigation systems as well as drop down menu lists. Suited for single-channel system applications and portable scanners, 380M also has interface trigger, backwall echo attenuator, and high PRF.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Flaw Detectors

Ultrasonic Tester features 32 test channels.

info@productnews.com (ThomasNet News) — Mon, 23 Jan 2006 07:05:41 -0500

Designed for flaw detection as well as measurement of wall thickness and OD of tubes and pipes, Echomac® FD-4 also reports ID dimensions, ovality, eccentricity, and wall variations. It is suitable for on-line or off-line inspections of tubes, bars, or plates, and utilizes EchoHunter software to configure each channel for any combination of thickness and flaw detection. System also features color printing of setups, waveforms, or strip chart recordings.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Ultrasonic Thickness Test Equipment | Ultrasonic Flaw Detectors

Portable Flaw Detector is sealed to IP 66 standards.

info@productnews.com (ThomasNet News) — Fri, 06 May 2005 08:19:50 -0500

Protected against ingress of dust and strong jets of water, ultrasonic USM 35X is used for inspection tasks from flaw detection to corrosion measurement. Unit provides rotary knobs for setting gain and function values, and operator can select required dB step width, freeze displayed A-scan, or switch A-scan to full screen size by means of direct access keys. Software allows operation to meet Japanese weld inspection standard Z3060-2002.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Flaw Detectors

Ultrasonic Inspection System examines joining technologies.

info@productnews.com (ThomasNet News) — Wed, 30 Mar 2005 08:43:48 -0500

Portable, PC-based USLT 2000B is operated as conventional flaw detector, displaying A-scans as well as DAC and DGS curves. Up to 4 selectable measurement values, such as sound path, projection distance, and depth and echo amplitude can be shown in measurement line. Battery-operated unit is available with optional software to allow saving, managing, and evaluation of inspection results for planning, control, and documentation of inspection process.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Inspection Equipment | Ultrasonic Flaw Detectors

Ultrasonic Flaw Detector offers software for defect sizing.

info@productnews.com (ThomasNet News) — Wed, 23 Mar 2005 09:29:27 -0500

Suited for oil and gas sector, Model USM 35, with optional software, provides defect sizing in line with API 5UI recommendations. For operation, user finds crack, adjusts gain to 80% amplitude, presses USM freeze key, and moves probe to produce envelope curve. Software measures and remembers each amplitude peak and carries out time-of-flight calculations for each measurement to provide code-compliant sizing of flaw.

This story is related to the following:
Sensors, Monitors and Transducers
Software

Search for suppliers of: Inspection & Testing Software | Flaw Detectors | Ultrasonic Detectors

Ultrasonic Flaw Detector handles range of inspection tasks.

info@productnews.com (ThomasNet News) — Wed, 23 Mar 2005 09:29:25 -0500

Model USM 32 is available in basic USB 32B version with max range of 55.9 in. in steel for standard applications, and USB 32L version with max range of 393.7 in. in steel for inspecting large components. Two spin-and-set rotary knobs allow rapid setting of gain and function values. Measuring 4.5 x 3.4 in., color LCD offers choice of color schemes and A-scan resolution of 320 x 220 pixels. Li-Ion batteries allow 10 hours of continuous use.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Detectors | Flaw Detectors

Refrigerant Monitors come in transportable versions.

info@productnews.com (ThomasNet News) — Fri, 18 Feb 2005 07:44:55 -0500

Chillgard RT detects down to 1 ppm over range of 0â�"1,000 ppm, and features up to 8 detection points. Photoacoustic infrared sensing enables detection of individual refrigerant with high specificity. Available in single-point diffusion and 4-point pumped models, Chillgard LS complies with ANSI/ASHRAE 15-1994 and provides low-level monitoring. Chillgard LE comes as single-point diffusion unit, single-point pumped unit for monitoring from remote location, or 4-point pumped unit.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Refrigerant Leak Detectors | Refrigerant Leak Monitors

Monitoring Systems detect 400 and 500 series refrigerants.

info@productnews.com (ThomasNet News) — Tue, 28 Sep 2004 07:46:34 -0500

Utilizing photoacoustic IR sensing technology, Chillgard L Series Monitors comply with ANSI/ASHRAE 15-1994 requirements for refrigeration monitoring. Offered in single-point diffusion and 4-point pumped models, Chillgard LS Monitors have water-resistant plastic enclosure and can detect R11, R12, R22, R123 and R134A refrigerants, as well as 400 and 500 series. Chillgard LC Control Module works with Chillgard LS gas sensor modules to provide remote signaling and control.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Refrigerant Leak Detectors | Refrigerant Leak Monitors

Flaw Detection System uses volumetric grid scanning.

info@productnews.com (ThomasNet News) — Tue, 08 Jun 2004 07:54:17 -0500

Featuring UT probes, CCD video camera for V-Scan grid positioning, and industrial notebook PC with software, ShafTest® portable ultrasonic system provides repeatable in-situ testing of shafts and axles. Software highlights cracks and provides tools to plot ultrasonic cross-sections through shaft at any depth chosen by operator. System requires only shaft-end access, avoiding equipment disassembly or multiple setups and scans in confined situations.

This story is related to the following:
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Flaw Detectors

Inspection System detects small web defects in real-time.

info@productnews.com (ThomasNet News) — Fri, 28 Nov 2003 08:45:50 -0500

FLAW SCAN SYSTEM detects 0.3mm² defects on 2 m wide webs, running at 200 m/min. It contains embedded hardware and software with i2S technology for real-time defect detection on continuous web products. Features include real-time display and roll-map, statistical analysis of defect content, and power defect classification tool. Programmable alarm settings are offered for each defect class. Applications include paper, nonwovens, plastic films, metal-foil manufacturing.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
Textile Industry Products