ThomasNet Industrial Newsroom -

Battery Simulator emulates stacks used in electric vehicles.

info@productnews.com (ThomasNet News) — Wed, 18 Nov 2009 08:41:35 -0500

Model 41-752 is 6-cell battery simulator that provides up to 300 mA of current from each cell, with output voltage from each adjustable up to 7 V. Each cell includes sense lines to optimize regulation performance and can be configured to operate as current sink in battery charging circuit of up to 100 mA. Independently controlled channels allow cells to be set to different output voltages to simulate different charge and capacity states.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Battery Simulators | Battery Test Equipment

Sequencers/Monitors simplify power management.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:37 -0500

Respectively capable of simultaneously managing up to 12 and 8 supply voltages, MAX16065 and MAX16066 are flash-configurable sequencers/monitors that integrate ±2.5% accurate current monitoring/group sequencing as well as ±1% accurate voltage monitoring/sequencing. Internal ADC and nonvolatile fault registers store and read back fault data. Also provided, graphical configuration tool helps generate data to analyze fault data or test different configurations.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Sequencers | Power Monitors

Testing/Charging System helps monitor EMTA battery status.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:34 -0500

Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers

Search for suppliers of: Battery Changers | Battery Test Equipment

Wireless Monitoring System helps data centers save energy.

info@productnews.com (ThomasNet News) — Wed, 04 Nov 2009 08:43:16 -0500

Utilizing PhyNet(TM) non-disruptive IP-based wireless sensor network technology, Arch Rock Energy Optimizer-Data Center Edition measures both power and cooling system efficiency in data centers. Managers can baseline data center against ASHRAE benchmarks; identify factors that cause energy waste, hot spots, or other harmful conditions; and optimize available capacity for new servers based on actual electrical/cooling consumption of equipment.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers
Green & Clean

Search for suppliers of: Power Monitors | Wireless Monitoring Systems | Energy Management Monitors

Test Stand facilitates torque measurement.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Electric Test Stands | Torque Testers | Tension Testers | Tensile Strength Testers | Materials Testers | Test Stands | Torque Meters | Torque Measuring Instruments | Force Measuring Instruments | Force Measuring Gages

High-Voltage Module enhances CableEye M3U cable test system.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:21 -0500

Permitting testing for insulation resistance/dielectric breakdown, HVX hipot module checks for opens, shorts, mis-wires, and resistance limits. It applies selectable voltage from 10-1,500 Vdc or 10-1,000 Vrms AC to each connection group in cable. System produces reports for each cable showing parameters such as test voltage, leakage current, and more; denoting PASS or FAIL on top. Safety features include administrator login and automatic halt of test if current exceeds 1.5 mA.

This story is related to the following:
Test and Measuring Instruments
Computer Hardware and Peripherals
Sensors, Monitors and Transducers

Search for suppliers of: Wire Testers | Resistance Testers | Insulation Testers | Hi-Pot Testers | High Voltage Testers | Harness Testers | Dielectric Withstand Testers | Continuity Testers | Cable & Harness Testers | Electric Test Equipment

Optical Modulation Analyzer defines signals up to 100 Gbaud.

info@productnews.com (ThomasNet News) — Wed, 23 Sep 2009 08:35:02 -0500

Enabling characterization of amplitude- or phase-modulated signals, PSO-200 Optical Modulation Analyzer provides bandwidth suitable to allow constellation and eye-diagram analysis of signals with baud rates up to 100 Gbaud. Signals can be analyzed at up to 400 Gbit/sec when using 4-symbol modulation format such as DP-QPSK. Detailed amplitude and phase patterns can be obtained to offer pulse-shape analysis for transmitter optimization/troubleshooting.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Waveform Analyzers | Signal Analyzers

IC monitors battery voltage, current, and temperature.

info@productnews.com (ThomasNet News) — Thu, 10 Sep 2009 08:30:12 -0500

Suited for variety of handheld devices, Model STC3100 has built-in Coulomb counter to calculate battery charge, and stores data at 16-bit resolution for retrieval by system controller. Access is via I2C interface, enabling controller to create graphical representation of remaining battery-operating time. Device has 64-bit identifier for traceability, 32 bytes RAM for battery history storage, and 1 external pin for use as detector input or to drive LED indicator.

This story is related to the following:
Sensors, Monitors and Transducers
Electronic Components and Devices

Search for suppliers of: Battery Monitors | Integrated Circuits (IC) | Battery Monitoring Systems

Energy Controller is designed for small food retail stores.

info@productnews.com (ThomasNet News) — Thu, 03 Sep 2009 08:37:47 -0500

Reducing operating costs through energy savings as well as reduced maintenance and food loss, AK-CS controls and monitors all major energy-using systems. It monitors energy use with kWh meter installed on main power service and uses Echelon® communications link coupled with modular I/O boards or stand-alone smart controllers. Via central EIS, retailer can look at energy usage across all store locations and create energy baselines for each facility/system.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers
Green & Clean

Search for suppliers of: Controls | Energy Management Monitors | Energy Management Controls

Supply Monitor integrates adjustable watchdog, reset timers.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:31 -0500

Supplied in 4 x 3 mm, 16-lead MSOP, LTC2939 six-channel supply monitor with processor supervisory functions can be configured for low-voltage applications down to 1.2 V. One of 16 preset or adjustable voltage threshold combinations can be selected, all of which maintain ±1.5% accuracy from -40 to +125°C. Along with power supply glitch immunity, features include 3-state watchdog input as well as reset and watchdog timeout periods that are adjusted using single external capacitor.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Integrated Circuits (IC) | Power Monitors

Transducers provide DC current monitoring.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Available for differential and ground fault current monitoring, space flight Series S 767 and military grade Series 913 B provide isolated analog output directly proportional to input magnetically. Featuring ½ in. aperture, Series S 767 operates on 22-36 Vdc power with response time of 50 ms. Series 913 B, designed with ¾ in. aperture, operates from 24-32 Vdc power with response time of 1 ms. Both chassis-mount series feature 0 to +5 V output and accuracy of 1% FS.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Electronic Detectors | Current Sense Transformers | Current, Voltage, Power Transducers | Current Sensors | AC Current & DC Output Sensors | Sensors | Current, Voltage & Power Measurement Instruments | Voltage Detectors | Inductive Detectors | Ground Fault Detectors | Current Indicators

Force Measurement Module features plug and play operation.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 07:43:36 -0500

With rugged aluminum housing, RG smart load cell is designed for integration in to assembly systems, weighing systems, and process automation and testing automation applications. It is controlled by commands sent from PC/PLC thru its RS-232 connector. Device has ASCII command library that allows for functions including peak force recall, set points, data averaging, data filtering, and calibration. Module is offered in capacities of 2-200 lb.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Tension Testers | Torque Measuring Instruments | Electric Test Stands | Torque Testers | Tensile Strength Testers | Materials Testers | Torque Meters | Force Measuring Instruments | Force Measuring Gages

AC Current Detectors come in clamp-on and pass-thru models.

info@productnews.com (ThomasNet News) — Thu, 16 Jul 2009 14:34:44 -0500

Designed to compare AC input to fixed or adjustable current threshold, Series 870 and ACS-3 provide isolated switch or relay output that is activated as required. Housed in metal case and operating from -20 to +71°C, Series 870 features SPDT relay output with 10 A contacts, frequency from 47-63 Hz, and ¾ in. dia aperture. Series ACS-3, operating from -50 to +65°C, is housed in plastic case with solid state switch output, frequency from 6-100 Hz, and response time of 200 msec.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Current Sense Transformers | Current, Voltage, Power Transducers | Current Sensors | AC Current & DC Output Sensors | Sensors | Current, Voltage & Power Measurement Instruments | Voltage Detectors | Inductive Detectors | Ground Fault Detectors | Clamp-On Harmonic/Transient AC Current Monitoring Sensors | Current Indicators

High-Bandwidth Chassis complements PXIe digital instruments.

info@productnews.com (ThomasNet News) — Wed, 08 Jul 2009 08:33:32 -0500

Suited for automated test applications, 32-channel PXI Express (PXIe)-based digital instruments NI PXIe-6544/45 are selectable-voltage digital waveform generator/analyzers respectively supporting clock rates to 100 and 200 MHz. Latter also provides typical streaming rates of 660 MBps. With 3U form factor, 8-slot PXIe chassis (NI PXIe-1082) offers 7 PXIe peripheral slots, up to 1 GBps per-slot bandwidth, and 4 GBps total system bandwidth.

This story is related to the following:
Electronic Components and Devices
Mechanical Components and Assemblies
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Waveform Generators | Electronic Equipment Chassis | Waveform Analyzers

Tensile Tester features self-tightening grip.

info@productnews.com (ThomasNet News) — Tue, 23 Jun 2009 08:27:42 -0500

Offering capacity of 1,200 lb, Wedge Grip features hardened serrated steel jaws that are opened with ergonomic spring loaded knob and rack-and-pinion type mechanism. Jaws ride on rollers instead of sliding along surface of housing, preventing jamming. Additional features include thru slot for samples of unlimited width, and optional swivel adapter that provides proper sample alignment in pull testing applications.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Test Systems | Force Measuring Gages | Force Measuring Instruments | Torque Meters | Materials Testers | Tensile Strength Testers | Torque Testers | Electric Test Stands

Power Monitors feature Bluetooth to PC/PDA interface.

info@productnews.com (ThomasNet News) — Fri, 19 Jun 2009 08:27:47 -0500

Featuring 600/800 V CAT IV rating, handheld PowerSight(TM) PS2500, PS3500, and PS4500 facilitate wireless operation from either PC or PDA. Using PowerSight Manager software, operator can view waveforms, take waveform snapshots, and save data, all while working at safe distance from meter and without need for NFPA 70E-prescribed safety gear.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Power Monitors

Dynamic Current Loggers provide 8,000 samples/sec.

info@productnews.com (ThomasNet News) — Fri, 12 Jun 2009 08:30:45 -0500

Designed for current and voltage measurements in automotive hybrid or electrical powertrain systems, KLARI-MOD SC 1000V Series offer 16-bit resolution and 1,000 V safety isolation between measurement circuitry and data output. Modules can be adapted to meet changing measurement requirements via use of different shunts or voltage probes. Data output is available via CANbus or RS232 serial interface.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Data Loggers & Data Logging Equipment | Voltage & Current Monitors

Waveform Digitizer offers high-speed DAQ for various systems.

info@productnews.com (ThomasNet News) — Thu, 21 May 2009 08:28:57 -0500

Featuring up to 2 Gpoint waveform memory on each channel, WDM 5044 Waveform Digitizer provides 4 GHz bandwidth in 4-channel mode and 6 GHz bandwidth in 2-channel mode. Unit is designed in displayless rack-mount format, incorporates FPGA-based processing engine, and utilizes high-speed PCI Express cabled interface. It includes Matlab drivers as well as WDM 5000 Signal Explorer software utility providing control, display, and waveform export capability.

This story is related to the following:
Software
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Digitizers | Data Acquisition Systems | Waveform Analyzers

Miniature Test Connectors offer metric thread options.

info@productnews.com (ThomasNet News) — Tue, 05 May 2009 08:30:04 -0500

Capable of sealing outside diameters down to 0.015 in., ME001 Series is designed for leak testing of infusion set and drug delivery devices. Connectors have 0.84 in. OD to mount in limited space locations, and pneumatic actuation, which is suited for soft touch control of delicate components.

This story is related to the following:
Sensors, Monitors and Transducers
Electronic Components and Devices
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Health, Medical and Dental Supplies and Equipment

Search for suppliers of: Test Connectors | Miniature Connectors | Metric Connectors | Medical Connectors

Temperature/Voltage Instrument offers 48-channels.

info@productnews.com (ThomasNet News) — Fri, 17 Apr 2009 08:38:15 -0500

Measuring voltage and temperature with accuracy of 0.2°C, EX1000A-TC utilizes LXI Class A technology to enable distributed measurements and synchronization of multiple instruments. Cold junction compensation techniques provide stable reference junction, minimizing temperature errors and allowing connection to any thermocouple type. Unit also provides signal conditioning and can convert raw measurements directly into engineering units.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers

Search for suppliers of: Temperature Measurement Equipment | Measuring Instruments | Current, Voltage & Power Measurement Instruments