ThomasNet Industrial Newsroom -

Fireproof Boxes protect electrical systems in emergencies.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2008 07:43:20 -0500

With halogen-free duroplastic construction that eliminates potential for metal-induced short circuits, Altech® fireproof enclosures can sustain flame protection up to 90 minutes in accordance with DIN 4102 Part 12, and offer ingress protection (water leaks) to IP 54 or IP 66. Rugged and shock-resistant units are available in wide range of sizes with 3-, 5-, or 8-pole terminal blocks, depending on model. All versions are self-extinguishing and can be lead sealed.

This story is related to the following:
Material Handling and Storage
Safety and Security Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fire Retardant Boxes | Fire Extinguishers | Corrosion Resistant Enclosures | Electric Enclosures

Fire Protection Valves handle pressures to 350 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jul 2008 07:41:20 -0500

Featuring nylon-coated finish and EPDM-encapsulated disc for good closure during shut downs, GD6765-8N grooved butterfly valve is gear-operated for slow-close functionality to protect piping from water shock. It is UL-/ULC-listed to 350 psi water working pressure and UL-listed for indoor/outdoor use. Additionally, F697-0 Class 250 iron body gate valve is rated to 300 psi and carries FM/NYC MEA approvals. Grooved double door silent check valve, KG900-W 350, is also available.

This story is related to the following:
Safety and Security Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Butterfly Valves | Double Door Check Valves | Gate Valves | Grooved Valves | Fire Protection System Valves | High Pressure Valves

Electric Proportioners feature hybrid heaters.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2008 07:45:38 -0500

Suited for polyurethane foam and polyurea applications, Reactor E-Series Proportioners include circulation valves with long lasting seals, temperature control board that facilitates component change-outs, and heat transformer that does not require tap settings. With hose heat circuit breaker module, need for in-rush limiter is eliminated.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Foam Proportioning Equipment

Flame Retardent protects flexible foams.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jan 2008 07:33:26 -0500

ANTIBLAZE® 117HF halogen-free flame retardant is formulated for use with flexible foams used in furniture and automobile seats. Offered as alternative to halogen-based flame retardants, high-efficiency, non-scorching product is non-persistent and non-bioaccumulative, per U.S. Environmental Protection Agency criteria.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire & Flame Retardants

Flame Retardants feature halogen-free formula.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Nov 2007 07:45:45 -0500

Based on Phosphine Oxides, Songflame YA 010 and YA 020 are designed to be reactive with resin backbone, principally epoxies, to give long term stability, while being environmentally safe, non-toxic, and non-corrosive. Based on Phenol/Bi-phenol polyphosphate, Songflame TP100 boosts thermal strength properties in resin matrix and is suited for variety of thermoplastic resins, particularly Polycarbonate, Polycarbonate blends with ABS, and wide range of Polyesters.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire & Flame Retardants

Spark Detection Systems minimize risk of fire in conveyors.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Oct 2007 07:50:07 -0500

Intended for pneumatic conveying systems in production facilities, CC7000 Series Spark Detection and Extinguishing Systems use sensors to detect smallest spark's infrared radiation. Sensors send signal to control console, which displays, analyzes, and stores all events. When alarms or trouble messages occur, countermeasures can be automatically initiated. Extinguishing assemblies release atomized water spray to immediately extinguish any sparks or embers.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Spark Detection & Extinguishing Systems

Flame Retardant has formula with thermal stability.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Sep 2005 07:11:07 -0500

Suited for use in high- and low-density polyethylenes, AmpShield 1199 can be used at temperatures to 550°F in non-FDA extrusion processes and has minimal effect on resin tensile and elongation properties. Material imparts flame resistance to polyethylene matrix at addition rates as low as 12%, but 18-20% is recommended to ensure enough is present to prevent polymer ignition. Polyolefins with proper letdown ratio of this masterbatch achieve V-2 rating or better.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire & Flame Retardants

Prepackaged Fire Control System offers simple installation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Jun 2005 07:48:11 -0500

Self-contained Pre-Pac®, pre-engineered to meet or exceed all applicable codes, requires contractors to hook-up unit to water and electricity at job site. Horizontal split case and vertical turbine models have discharge pressures of 40-390 psi and capacities of 150-4,500 gpm. Also available, vertical in-line and end suction models feature discharge pressures of 40-150 psi and capacities of 50-750 gpm.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems | Fire Protection Systems | Fire Fighting Equipment & Supplies

Fire Suppression System provides 1,200 lb of agent.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Dec 2004 01:00:00 -0500

Agent Delivery Cylinder, Model FM-200R can provide 24 hr suppression protection for areas up to 40,000 cu-ft. During fire, system allows for maximum of 1,200 lb to be distributed through fixed piping network for protection of facility's most critical assets. Clean, colorless gas extinguishes fire in seconds and leaves no residue or damage.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Extinguisher Cylinders | Fire Suppression Systems

Fume Hood Fire Suppression System activates instantly.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Nov 2004 08:16:39 -0500

Fire suppression system provides fire protection at all major points of air flow inside fume cabinet. It features canister of fire suppression agent and flexible polymer detection tubing that can be routed anywhere inside cabinet. Upon exposure to 212°F flame, tubing ruptures and releases 1-50 lb of fire suppressant into fume hood. Self-contained system requires no electricity or external power, but can turn off power or signal alarm.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems

Fire Suppression Hood is suited for use in restaurants.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Feb 2004 07:49:09 -0500

Self-contained Amerex® Zone Defense(TM) restaurant fire suppression system incorporates discharge nozzles equally spaced over entire length of Greenheck kitchen hood. Pneumatic Linear Detection device, located behind filters, runs entire length of hood and activates automatically at pre-determined temperature. Features include overlapping spray of wet chemical agent and 34 in. deep x length of hood zone of protection.

This story is related to the following:
Safety and Security Equipment
Food Processing and Preparation

Search for suppliers of: Fire Suppression Systems | Kitchen Equipment

Fire Suppression System installs on vertical carousels.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Oct 2003 08:16:16 -0500

Pneumatically-operated Fire Suppression System features tube system installed near high-risk fire areas in vertical carousel that operates as detection and suppression device. If controls or motor overheat, high temperature causes tubing nearest hot spot to burst, releasing pressurized fire suppression agent directly on source of heat, extinguishing hot spot and minimizing collateral material and equipment damage.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems

Control Panel controls release of extinguishing agents.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2003 07:45:09 -0500

Simplex® 4004R Suppression Releasing Panel suppresses fires in computer rooms, petrochemical and power plants, and high-risk locations. Product controls release of extinguishing systems such as Inergen®, FM-200, preaction, water spray deluge, and carbon dioxide. Capable of handling one or two hazard areas, product also provides emergency notification using horns or strobes. Panel can capture detailed history of all trouble, alarm, and releasing events.

This story is related to the following:
Controls and Controllers
Safety and Security Equipment

Search for suppliers of: Fire Alarm Systems | Power Plant Fire Protection Systems | Fire Suppression Systems

Vehicular Fire Protection System uses suppresing powder.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Dec 2002 07:43:11 -0500

FIRE Panel(TM) helps prevent fires caused by rear-end collisions by encasing vehicle's fuel tank with custom-formed, 3D, polymer panel that contains fire-suppressing powder. Unaffected by low-speed accidents, system's shape wraps around sides of fuel tank to provide additional protection during skewed angle collisions. Upon impact, panel shatters, releases powder, and renders space around tank inert, preventing ignition of fuel or suppressing fire.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Protection Systems | Fire Suppression Systems

Suppression System extinguishes engine compartment fires.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Oct 2002 08:39:29 -0500

Firetrace® Fire Suppression System requires no electricity or external power. Polymer tubing can be routed anywhere within engine compartment. When exposed to open flame, tubing ruptures, dispensing entire contents of cylinder containing fire-suppression agent such as FM-200®, C02, dry chemical powders, and foam. System is totally self-contained and helps prevent extensive vehicle damage. It is suitable for enclosed spaces within vehicles of 250 ft³ or less.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems

Fire Suppression System protects flammable liquid storage cabinets.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Aug 2002 07:40:28 -0500

Firetrace® Automatic Fire Suppression System is totally self-contained and features flexible, polymer tubing which can be routed anywhere within cabinet up to 250 cu ft. It is armed with 3 to 20 lbs of fire suppression agent such as FM-200®, CO2, dry chemical powders, or foam. When detection tubing is exposed to flame, it automatically ruptures to form nozzle and dispenses all of fire suppression agent. System requires no electricity or external power.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems

Fire Suppression System continuously protects heavy equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Jul 2002 07:59:11 -0500

Fire Suppression System is fully operational without electricity or external power source. Designed to instantly detect and extinguish open flame at source, system is totally self-contained and dispenses suppression agent to extinguish fire. Flexible polymer tubing ruptures when exposed to open flame. System is available with cylinders containing various suppression agents including FM-200®, CO2, dry chemical powders, and foam.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems

Check Valves are UL listed and FM approved.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Jun 2002 08:31:17 -0500

Check Valves, in 1½ and 2 in. sizes, can be installed horizontally or vertically. They are rated up to 250 psi water working pressure and include tapped opening for system draining. Both 1½ in. and 2 in. are UL and ULC listed in threaded or grooved styles, and are FM approved in the grooved configuration as both single check valves and anti-water hammer check valves.

This story is related to the following:
Safety and Security Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Check Valves | Fire Protection System Valves

Fire Extinguisher protects electrical apparatus.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 May 2002 07:47:45 -0500

Electrical Fire Suppression System can detect fire inside enclosure and instantly release clean suppression agent to minimize damage to components and circuitry. It works inside mission-critical electrical enclosures and control panels such as PLCs, MCCs, and switch gear. Flexible polymer tubing that ruptures when exposed to flame can be routed anywhere within cabinet to automatically dispense suppression agent to extinguish fire.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Protection Systems

Fire Suppression Systems protect without electricity.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Feb 2002 08:56:50 -0500

Self-contained Automatic Fire Suppression Systems instantly detect and extinguish fire inside equipment, enclosed spaces, or cabinets up to 250 cu ft. They incorporate flexible, polymer tubing that ruptures and dispenses customer-selected suppression agent when it is exposed to flame. FM-200® or CO2 clean agents are non-conductive and leave no residue. Dry powders and foams are used for fuel sources or exposed flammable liquids.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Fire Suppression Systems