ThomasNet Industrial Newsroom -

Perforated Barrier blocks up to 97% of radiant heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:20 -0500

Solar-SNAP(TM) Radiant Heat Barrier employs built-in spring steel battens every 24 in. to secure it in place without harming roofing components and prevent drooping. Available with 16 and 24 in. widths in 500 ft rolls, heavy-duty barrier fits effortlessly in between the trusses on underside of roof decking and can also be easily removed and reinstalled for inspection, cleaning, and repair. It directs water toward eaves to shield ceiling and insulation from damage in case of leaks.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Heat Resistant Materials | Radiant Barriers

Nylon Flash Tape is suited for metal and composite bonding.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:32 -0500

Withstanding temperatures up to 350°F, Scapa 815 3.2 mil thick tape is designed to mask and hold tools, forms, and parts for metal and composite bonding, and is also used for masking PCB contacts during conformal coating. It consists of high temperature nylon backing, single coated with rubber adhesive that eliminates potential for silicone contamination. Non-silicone tape withstands autoclaving if necessary.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing
Safety and Security Equipment

Search for suppliers of: Bonding Tapes | Heat Resistant Tapes | High Temperature Tapes | Nylon Tapes

Fume Protection Tape is designed for PCB masking.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Aug 2008 07:41:02 -0500

Scapa 519 heat-resistant, non-silicone fume protection tape masks printed circuit boards during solder stripping and nickel/gold plating of finger contacts. It protects large areas of PCBs from chemical fumes and splashes. Product consists of conformable polyester film, single coated with rubber adhesive that removes cleanly and offers controlled adhesion. Chemically resistant tape has high-strength backing and withstands temperatures as high as 250°F.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Safety and Security Equipment

Search for suppliers of: Adhesive Tapes | Printed Circuit Board (PCB) Tapes | Polyester Tapes | Heat Resistant Tapes

Polyamide-Based Compounds withstand heat in electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:42 -0500

Xtreme LNP(TM) Starflam(TM) compounds withstand high temperatures encountered in lead-free soldering processes. Based on technology that forms chemical bonds between PA macromolecules under E-beam radiation, they are available in 2 grades featuring non-brominated, non-chlorinated flame retardants, suited for contactors, connectors, and circuit breakers. They are also available in 2 non fire-resistant grades for under hood automotive applications or parts in HVAC equipment.

This story is related to the following:
Materials and Material Processing
Safety and Security Equipment

Search for suppliers of: Heat Resistant Materials | Electronic Compounds

High-Temperature Materials are self-lubricating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:35:09 -0500

Metcar grades M-199 and M-201 high-temperature mechanical materials are designed to function without lubrication in dry and dust-prone environments. Able to operate in temperatures between 400-750ºF, they have high electrical conductivity, high load capacity and wear resistance, are homogenous, and provide continuous lubrication. Bearings manufactured from materials are self-lubricating, non-galling, dimensionally stable, and have high compressive strength.

This story is related to the following:
Materials and Material Processing
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Safety and Security Equipment

Search for suppliers of: Heat Resistant Materials | High Temperature Bearings

Safety Device is made of 3 layers of ballistic Dupont Kevlar.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:24 -0500

Including predetermined outlet openings at top and bottom that allow high-pressure gases and small insulator fragments to escape in event of any insulator failure, ABB Kevlar Wrap & Strap Safety Device ensures substation safety. Compatible with virtually any insulator design, it eliminates need to remove high-voltage leads prior to installation. Busing blanket protects employees from blasts and resulting fragmentized porcelain working on or near electrical equipment.

This story is related to the following:
Safety and Security Equipment
Explosives, Armaments and Weaponry

Search for suppliers of: Ballistic Blankets | Electrical Blast Blankets | Electricians' & Linemen's Blankets | Safety Equipment & Supplies

Mechanical Materials withstand temperatures to 700°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Mar 2008 07:38:03 -0500

Consisting of carbon/graphite Antimony impregnated materials, Metcar grades M-343 and M-346 operate in difficult environments where oil and grease lubrication cannot be used due to temperature limitations. Products are designed for medium to high loads and are suited for bearings and thrust washers in both dry and submerged environments. Offering lubricating qualities and wear resistance, materials are completely homogenous and provide continuous lubrication.

This story is related to the following:
Lubricants
Safety and Security Equipment
Mechanical Components and Assemblies

Search for suppliers of: Heat Resistant Materials | Carbon-Graphite Mechanical Parts | High Temperature Lubricants | Graphite Lubricants

Welding Cloth features hazardous fluid resistant coating.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Mar 2008 07:37:38 -0500

Bulldog Red(TM) welding blanket and welding curtain damage control cloth has weldshed coating that stops hazardous fluids from being absorbed into cloth when toxic or flammable fluids are present. Abrasion- and spark-resistant cloth has service temperature of up to 1,000°F, does not conduct electricity, and is resistant to chemicals and weld spatter. It is OSHA-compliant and is available in 38 or 60 in. rolls at 50 yd in length.

This story is related to the following:
Safety and Security Equipment
Welding Equipment and Supplies

Search for suppliers of: Welding Blanket High Temperature Cloth

Glass Fibers offer lightweight ballistics protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Mar 2008 07:49:41 -0500

Offering Vehicle Armor Composite Solutions for protection against IED and EFP threats, Featherlight(TM) glass fibers withstand severe threat levels, while Quicksilver(TM) glass fibers offer stiffer, lighter composite parts than E-glass reinforcements. Composites can be deployed in both structural and nonstructural components on suite of vehicles, enabling lightweight, fire-retardant, and load bearing structures to compete with steel and aluminum solutions.

This story is related to the following:
Materials and Material Processing
Safety and Security Equipment
Explosives, Armaments and Weaponry

Search for suppliers of: Armor Plates | Heat & Flame Resistant Fiber | Fiberglass Materials

EPDM Tapes are resistant to water/chemicals/ozone/oxidation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Nov 2007 07:40:52 -0500

Medium-density P9100 and soft-density P9200 closed cell EPDM tapes meet needs of maintenance and construction crews for weather stripping, dust-proofing, sound dampening, and thermal insulation. Tapes are single-coated with professional-grade acrylic adhesive that has removable liner. Featuring temperature range of -65 to +200°F, they can be ordered in standard thicknesses of 1/6 to ½ in. and in lengths up to 100 ft.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Safety and Security Equipment

Search for suppliers of: Insulating Tapes | Duct Sealing Tapes | Adhesive Tapes

Aerogel Insulation Product is based on nanotechnology.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Sep 2007 08:05:48 -0500

Capable of adding R-value to wood- and steel-frame buildings, Spaceloft® Insul-Cap(TM) can add up to R4.0 to standard wall framing. Made of 3/8 in. thick strip of flexible aerogel blanket, it can fit between framing and sheathing without altering standard construction. Product is applied in strips with peel-and-stick adhesive backing or staples, and can be customized to fit on headers, rim joists, corners, rafters, window flashing, and other hard to insulate areas.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Thermal Insulation | Insulating Materials

HCS-Coated Optical Fiber enables flexible termination.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 24 Aug 2007 07:45:06 -0500

Resistant to moisture and rated to 125°C, 62.5 micron (core) optical fiber with HCS® (Hard Clad Silica) fiber coating is available cabled and pre-terminated or can be field-terminated with ST® and SMA connectors using OFS crimp and cleave process. Fiber, cable, and connector system features 200 micron cladding, withstands environments with high pull forces, and is suited for high-bandwidth (over 200 MHz-km @ 850 nm) communication.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Safety and Security Equipment

Search for suppliers of: Optical Fibers | Heat & Flame Resistant Fiber

Removable Insulation Blankets target underground mines.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:15 -0500

Featuring stainless steel liner, MineWrap(TM) Mark III Blankets prevent oil leaks from coming into contact with insulation material, minimizing risk of fire. Outer surface is reinforced stainless steel foil, covered with stainless steel mesh to withstand demanding conditions of underground mining such as rock falls. Used on diesel-powered equipment, blankets protect personnel from burns, lower ambient temperature, maximize heat retention, and shield heat-sensitive components.

This story is related to the following:
Safety and Security Equipment

Tapes handle high-temperature industrial applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jan 2007 07:09:09 -0500

Pyro-Tape 682-Series tapes are for use in plasma spray masking, heat protection, and abrasion-, chemical-, and electrical-resistance applications. Able to withstand temperatures to 500°F, 682-PM is for plasma spray masking, 682-HR is heat reflective tape for components and pipes, and 682-CR is non-stick and corrosion-resistant. Type 682-DS is double-sided tape, while 682-ER is used for electrical insulation. Used to provide abrasion-resistance, 682-AR functions at up to 200°F.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Safety and Security Equipment

Search for suppliers of: Masking Tapes | Insulating Tapes | Heat Resistant Tapes | Plasma Spray Tapes | Electrical Tapes | Double-Faced Tapes | Corrosion Resistant Tapes | Abrasive Tapes

Adhesive Film is UV- and heat-resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Sep 2006 08:07:17 -0500

Consisting of non-woven tissue, Dublfilm S711RW UV adhesive tape is double-coated with heat-resistant acrylic adhesive and supplied with #60 kraft release liner. Flexible tissue carrier provides dimensional stability, and tears by hand. Suited for image mounting and framing, high speed splicing, and general purpose bonding, tape laminates to variety of substrates and performs in wide range of temperatures. Tape is designed with universal core to fit all ATG applicators.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Safety and Security Equipment

Search for suppliers of: Adhesive Film | Splicing Tapes | Mounting Tapes | Heat Resistant Tapes | Double Coated Tapes | Bonding Tapes | Adhesive Tapes

Refractory Sheet Board contains no asbestos or RCF fibers.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Sep 2006 07:26:37 -0500

Consisting of reinforcing fibers tightly bound in alumina ceramic matrix, RS-1200 provides thermo-mechanical and electrical insulation in applications with temperatures up to 2,372°F. Completely inorganic composite can be readily machined to tight tolerances with conventional carbide tooling.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Insulating Refractories

Refractory Sheet suits applications in excess of 1,650°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Aug 2006 08:17:06 -0500

Consisting of medium-density, fiber-reinforced ceramic composite material with greater than 99% Alpha-Alumina purity, Type RS-99 is suited for Solid Oxide Fuel Cells and setters for P/M and MIM sintering applications. Fired density of 130 lb/ft³ allows it to be machined to tight tolerances with standard tooling. Type RS-99M is highly plastic moldable sheet. Type RS-99W can be moistened with water and molded into desired shape, while Type RS-99R is prefired and unaffected by moisture.

This story is related to the following:
Materials and Material Processing
Safety and Security Equipment

Search for suppliers of: Ceramic Refractories

Refractory Sheet Board suits high-temperature applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Aug 2006 07:11:17 -0500

Consisting of combination of strong reinforcing fibers tightly bound in alumina ceramic matrix, Type RS-1200 provides thermo-mechanical and electrical insulation in applications with temperatures up to 2,372°F. Product is completely inorganic and contains no asbestos or RCF fibers. It can be machined to tight tolerances with conventional carbide tooling.

This story is related to the following:
Materials and Material Processing
Safety and Security Equipment

Search for suppliers of: Insulating Refractories | Ceramic Refractories

Pump Material suits continuous high-temperature operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Aug 2006 08:14:47 -0500

AVT butterfly and ball valves are available in abrasion- and corrosion-resistant material, AVT525, which is rated for continuous operation at temperatures to 356°F. Material exhibits no creep or thermal degradation and is immune to external corrosive attack, liner porosity and permeation problems, and galvanic reactions. It has low magnetic signature and is firesafe API607-certified. Valves suit applications such as steam systems, evaporator units, and exhaust gas systems.

This story is related to the following:
Safety and Security Equipment

Search for suppliers of: Heat Resistant Materials

Wedge Material protects power generator stator coils.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Aug 2006 08:23:38 -0500

NP342LS low-shrink material for Class B generators functions at up to 130°C and features strengths of 23,000 psi flexural, 12,700 psi tensile, and 37,000 psi compressive. Wedge can withstand impact force during installation as well as centrifugally and magnetically induced stresses during operation. Designed with non-abrasive phenolic-cotton composite, material can be machined to tight tolerances and provides 1.7% absorption rate.

This story is related to the following:
Chemical Processing and Waste Management
Safety and Security Equipment

Search for suppliers of: Phenolic Materials | Heat Resistant Materials