Industrial Newsroom - Robotics

Embedded Microprocessor draws only 80 mW in active mode.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:35:07 -0500

ARM926EJ-S(TM)-based 400 MHz AT91SAM9G20 features multilayer AHB, peripheral direct memory access, and distributed memory architecture that, along with 6-layer bus matrix, enables multiple simultaneous data transfers between memories, peripherals, and external interfaces without consuming CPU clock cycles. External bus interface is clocked at 133 MHz for high-speed transfers to off-chip memories. High internal and external data bandwidth makes device suited for embedded networked applications.

This story is related to the following:
Robotics
Computer Hardware and Peripherals

Search for suppliers of: Microprocessors | Communications Processors

Robotic Bending Cell offers mid-level automation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2008 07:39:11 -0500

Combining PPEB or Easy-Form® Series CNC press brake with multi-axis Kuka robot, RoboCell handles small to medium-sized components in capacities of 80-110 ton bending force and 2.5 or 3.0 m table configurations. It can automatically load, form, and stack finished parts in unmanned process. Easy-Form® Laser system tracks parts during bending, providing real-time angle measurements. All functions are controlled through instructions from integrated off-line programming software.

This story is related to the following:
Machinery and Machining Tools
Robotics

Search for suppliers of: Forming & Bending Machinery | Bending Cell Robots

Collet Gripper handles delicate or rugged objects.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:55 -0500

Enabling collet to grip part on either O.D. or I.D., C-8800 Heavy-Duty 5C Collet Gripper can rapidly pick and place uniformly sized objects, and features pneumatically adjustable 360° clamping force for parts transfer. Unit can also function as workholding device for grinding, deburring, or polishing operations.

This story is related to the following:
Robotics
Material Handling and Storage
Machinery and Machining Tools

Search for suppliers of: Robotic Grippers | Collets

Simulation Software suits automated dispensing machines.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:21 -0500

Providing simulation of robot operations including 3D linear and arc interpolations, CSR E-Hub helps engineers develop and prove out dispensing programs for desktop robots ahead of use on production line machines. Program delivers realistic simulation and accurate positioning of robot with repeatability of ±0.01 mm for dispensing beads and dots. In addition to collision detection, software enables creation and import of customized parts, fixtures, and worktables with workcells.

This story is related to the following:
Software
Robotics

Search for suppliers of: Simulation Software | Robotics Software

Robotized CMM Arm accelerates laser inspection jobs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:18 -0500

Designed to hasten repetitive 3D inspection duties, RCA combines automation capability of traditional CMM with mobility and part accessibility of articulated arm. Internal 7-axis articulated arm and external skeleton driven by electric motors create measuring robot that drives Metris MMD laser scanner along programmed motion path. Due to encoder technology and carbon fiber axes, RCA intrinsically offers true absolute measurement accuracy within inspection volume of 4.2 m dia.

This story is related to the following:
Robotics
Test and Measuring Instruments

Search for suppliers of: Robotic Arms | Coordinate Measuring Machinery (CMM)

Inserter System doubles manual speeds 40-50 bpm.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Apr 2008 07:35:35 -0500

Designed to automatically place singular 3D objects into robag® 3 VFFS packaging equipment, system eliminates missed inserts and manual labor. Insert thickness range from 5 to 110 x 35 mm in any direction with weight capacity up to 25 g. Inserter reduces number of multiple inserts at speeds of 100 bpm and provides emergency shutoff to protect machinery in case of required shutdown. Unit can be added to most existing robag® 3 rotary jaw machines on site.

This story is related to the following:
Packaging Products & Equipment
Robotics

Search for suppliers of: Packaging Equipment | Inserters | Insert Loading Robots

Scara Robots are optimized for cycle time and payload.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Apr 2008 07:51:39 -0500

Comprised of 3 models, TH-A Series includes full-function TS Controller with PLC and multitask function. X-, Y-, and Z-axis positioning repeatability is ±0.01 mm, while C-axis positioning repeatability is ±0.004°. Built with sealed labyrinth structure, series offers rigid construction and vibration-free performance. Max payload mass for TH650A is 10.0 Kg, and max composite speed is 7.52 m/s. While TH850A and TH1050A carry 20.0 Kg max each, respective max speeds are 8.13 and 9.15 m/s.

This story is related to the following:
Robotics

Search for suppliers of: Material Handling Robots

Microprocessors can be customized for any unique set of I/O.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Apr 2008 07:37:41 -0500

Both NS9215 and NS9210 integrate 2 independent high-speed controllers that are programmable as FIMs (Flexible Interface Modules), which provide different hardware interfaces based on needs of product or application. Based on ARM926EJ-S core capable of operating at speeds up to 150 MHz, products also feature on-chip 256-bit AES accelerator that provides secure network communication with SSL/TLS and IPsec protocols. Digi Dynamic Power Control(TM) is also included.

This story is related to the following:
Robotics

Search for suppliers of: Microprocessors

Kit adds web and data security to embedded applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:16 -0500

Comprised of RCM4300 RabbitCore® with 512 MB miniSD(TM) card, prototyping board, accessories, and development tools, Secure Embedded Web Application Kit helps design engineers develop code for secure web pages and data exchanges. Product utilizes Dynamic C® IDE, incorporating editor, compiler, and in-circuit debugger. Included security application sample programs facilitate implementation of solid embedded system that uses SSL/TLS secure data transmission technology.

This story is related to the following:
Robotics
Software
Test and Measuring Instruments

Search for suppliers of: Microprocessors | Software Development Tools | Evaluation Boards

Measuring Arm features accuracy to 0.0006 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Apr 2008 07:42:26 -0500

INFINITE 2.0 Measuring Arm includes TESA Kinematic probes, ergonomic wrist with integrated USB digital camera, probe holster, and WiFi with wireless range up to 200 ft, even through walls. Suited for mobile measurement, inspection, and reverse engineering on shop floor or in metrology lab, 6- and 7-axis arm is available in measuring ranges from 4-12 ft. System includes infinite-rotating grips located at elbow and forearm and rechargeable Li-Ion battery.

This story is related to the following:
Test and Measuring Instruments
Robotics

Search for suppliers of: Coordinate Measuring Machinery (CMM) | Robotic Arms

Collision Detector alerts drivers to dangerous conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:10 -0500

Using radar technology based on Safe Braking Distance, FrontAlert(TM) Collision Alert System (CAS) detects hazards in vehicle's path and alerts driver of potential collision via 3.5 in. LCD interface. Green light indicates system is active, and yellow light indicates detected object (no action needed). Red light and alert tone tell driver to take caution, decelerate, brake, or take safe evasive action to avoid collision. Alerts stop once corrective action has been taken.

This story is related to the following:
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Robotics

Search for suppliers of: Traffic Alert & Collision Avoidance Systems | Anti-Collision Sensors

CCD Cameras are designed for laser beam profiling.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Mar 2008 07:37:47 -0500

USB 2.0 Silicon CCD Cameras, Models SP503U and SP62OU, are designed for laser beam measurement applications and capture wavelengths from 190-1550 nm in both continuous wave and pulsed mode. Model SP503U has resolution of 640 x 480 pixels, while Model SP620U has resolution of 1600 x 1200 pixels. Characteristics include automatic or manual gain control, up to 64 dB dynamic range, and photodiode synch. Both cameras include USB 2.0 interface, beam analysis software, and multiple mounting options.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Vision Systems Sponsored by: Keyence Corporation of America - The Internet Resource for Machine Vision Solutions
Robotics

Search for suppliers of: CCD Cameras | Cameras

Mobile Robot suits material handling applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Mar 2008 07:38:52 -0500

Employing Industrial Mobile Robotics technology, vision-guided Model GT3 moves through manufacturing, warehousing, and distribution operations utilizing stereo cameras to build 3D map of environment. It then uses map and its own reasoning ability to navigate predetermined path to complete assigned transport task. Designed to free up skilled employees, GT3 pulls carts, delivers palletized materials, and positions supplies without wire guides, magnets, or lasers.

This story is related to the following:
Robotics

Search for suppliers of: Mobile Robots | Material Handling Robots

Inspection System monitors spot welding electrodes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 18 Mar 2008 07:34:23 -0500

Weld Tip System (WTS) for robotic spot welding inspects spot welding electrodes and ensures that face diameters and general appearance meet acceptance criteria. It incorporates CURE® technology (Concurrent Universal Recognition Engine) memory processing architecture and is suited for all welding cells.

This story is related to the following:
Test and Measuring Instruments
Robotics
Welding Equipment and Supplies

Search for suppliers of: Inspection Systems | Robotic Welding Equipment | Spot Welding Electrodes

Vertical Order Picker offers 4 lift height options.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Mar 2008 07:36:41 -0500

Featuring 24 V, 3-phase AC-drive technology, Model EKS 110 enables operators to pick stocked items from 1st, 2nd, or 3rd level of racking. Truck offers lifting capacity of 2,200 lb, and can pick up pallets or crates both longitudinally and crosswise. With L version, platform and load section can be raised up to 118 in. allowing items to be picked from heights up to 15 ft. Auxiliary lift, or Z version, allows forks to be positioned at ergonomically correct height for operator.

This story is related to the following:
Material Handling and Storage
Robotics

Search for suppliers of: Order Picking Trucks | Order Pickers

Scara Robot has 900 mm arm length with 20 Kg max payload.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Mar 2008 07:41:24 -0500

Designed with minimal parts for reduced maintenance concerns, YK900XG uses long-life grease and features directly connected (belt-less) motor and reduction system for Z and R axes. Absolute type resolver is used for position detector, eliminating need for return-to-origin action, and positioning accuracy is +0.02 mm for XY axes. Piping and wiring can be designed in compact layout, and special controller is available to facilitate execution of complicated operations.

This story is related to the following:
Robotics

Search for suppliers of: Material Handling Robots

Error Proofing System aids assembly of threaded fasteners.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Mar 2008 07:41:22 -0500

Utilizing position monitoring technology, Tool Position System (TPS) keeps track of assembly tool location and can set specific control parameters for each fastener. It is available for articulating arms from 10-4,000 Nm, and sequence of XYZ fastener positions can be programmed to ensure assembly to specifications. Along with 5 or 10 in. color touchscreen HMI, other features include socket tray option, PLC with built-in power supply, Teach mode, and part pattern storage.

This story is related to the following:
Robotics
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Assembly Robots | Tool Monitors

SCARA Robots work with Micro PowerDrive controllers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Feb 2008 07:51:29 -0500

Available in 168 models ranging from 450-1,000 mm in reach, G-Series combines smart motion control technology with high rigidity arm design to achieve optimum speed and precision with minimal vibration. Robot arms are available in standard, Class 10 Clean, or IP54/65 configurations as well as tabletop, wall, or ceiling mount versions. Vision Guidance, DeviceNet, Profibus, Ethernet IP, and Microsoft .NET support are optional.

This story is related to the following:
Robotics

Search for suppliers of: Robotic Arms | Assembly Robots

Arc Welding Robot suits push-pull aluminum welding.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Feb 2008 07:25:24 -0500

Featuring bus communication interface to control lift arc start and end, TAWERS-Aluminum MIG can detect when current is flowing and retracts to take pressure off wire, resulting in reliable arc ignition. It uses 3 motor system to ensure accurate wire feed, and features syncro-weaving function and servo feeder for real-time parameter adjustment from thick to thin materials. Product can also use high voltage touch sensing through aluminum oxide, which prevents wire bending.

This story is related to the following:
Robotics
Welding Equipment and Supplies

Search for suppliers of: Arc Welding Robots | Welding Robots

Rib Gripper is designed for internal fascia mold removal.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:37:32 -0500

Model GRZ 32EC-30 Actuated Rib Gripper removes automotive bumper fascias from "A" side of mold. Featuring 30 mm stripper stroke that has adjustment capabilities by increasing or decreasing cylinder pin to fit any size application. Gripper and cylinder assemblies are mounted on bearing rail to help support load of part being pulled from mold. Unit has custom mounting bracket to allow perpendicular or parallel mount to accommodate for specific application.

This story is related to the following:
Robotics
Material Handling and Storage

Search for suppliers of: Robotic Grippers