ThomasNet Industrial Newsroom -

Cordless Tool handles cutting, sawing, and sanding tasks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Sep 2008 07:36:16 -0500

Powered via 12 V Max Litheon(TM) battery system, PS50 Multi-X(TM) uses modular accessories to achieve multifunctional operation with tool change times down to 60 sec. Included adaptor enables use of Dremel, Fein, or Proxxon accessories. Weighing 2.2 lb, multi-purpose oscillating tool features 240° adjustable tool holder; variable speed dial (5,000-20,000 rpm); and ergonomically designed chassis that has soft grip surface with 6.88 in. circumference for optimal maneuverability.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Cutting Tools | Sanding Tools | Saw Tools | Cordless Tools

Sliding Compound Miter Saws measure 8½ in.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Sep 2008 07:45:37 -0500

Powered by 9.5 A motors and featuring no-load speed of 5,500 rpm, Models C8FSE and C8FSHE slide compound miter saws weigh 31 and 32 lb, respectively. With bevel range of 48° to left and 5° to right for precise compound cuts, they feature thumb-actuated positive stops to adjust miter angles of 15, 22.5, 31.6, and 45° to both left and right. Portable units can handle materials up to 2 9/16 in. high, such as crown molding lying flat and 12 in. deep in 90° cross cut.

This story is related to the following:
Portable Tools
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Wood Saws | Woodworking Table Saws | Electric, Portable Hand Saws

Pneumatic Hacksaw cuts pipe and structural steel up to 24 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:33 -0500

With blade stroke of 2 3/8 in., Model 5 1212 0050 will cut 24 in. dia pipe at 90° in one pass. Unit features 1.5 hp air motor that uses 51 cfm air volume at 90 psi air pressure. Certified to ATEX regulations EX 112 GcT5, saw can operate in hazardous atmospheres and environments classified as EX Zone 2. Portable tool uses range of heavy-duty blades from 8-37 in. long, which are available in HSS (M2) and HSS-SL with Molybdenum for cutting carbon steel, SS, and hard alloys.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws

Reciprocating Saw is cordless.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:39 -0500

Suited for cutting pipe, strut, threaded rod, steel studs, and other miscellaneous steel, Hilti WSR 36-A can also be used for cutting wood with nails, wood beams, treated lumber, plywood, wood composites, or plastics. With 36 V 3.3 Ah CPC Li-Ion battery, it features Active Vibration Reduction technology that reduces vibration by up to two-thirds. Including ergonomic operating controls and comfortable handling, it maintains control when cutting overhead and in difficult to reach areas.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wood Cut-Off Saws | Metal Cutting Saws | Reciprocating Sawing Machinery | Hand Saws | Cordless Tools

Corded/Cordless Tracksaws deliver clean, precise cuts.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Aug 2008 07:56:48 -0500

Corded DWS520 and cordless DC351 travel along anti-slip aluminum track for making clean, straight, and precise cuts. Zero-clearance track features anti-splinter edges, and its underside has 2 friction strips to grab material and keep track from moving. Powered by 1,300 W motor, both models feature straight plunge mechanism and 6 ½ in., 48-tooth woodworking blade with laser cut plate and precision ground teeth. Cutting depth on track is 2 1/8 in. @ 90º and 1 5/8 in. @ 45º bevel.

This story is related to the following:
Portable Tools

Search for suppliers of: Wood Saws | Electric, Portable Saws

Hole Saw utilizes diamond-edge blade.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:53 -0500

Designed for cutting tile, stone, and glass, LENOX DIAMOND(TM) Hole Saw features brazed diamond edge that minimizes grab that can occur when cutting hard materials. Also minimizing cutting pressure, edge eliminates damage or cracking of materials. Saw has wall thickness that prevents airborne dust particles and thin kerf width saves battery charge by not removing unnecessary material.

This story is related to the following:
Portable Tools

Search for suppliers of: Hole Saws | Hand Tools

Steel Beam Splitter shears wide flange into 2 T-shaped beams.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:02:06 -0500

Steel Beam Splitter can cut any beam up to 40 in. wide and up to 9/16 in. web thickness without need to straighten beams once they are split. Guide rail exit system leads beam out of cutting blades and keeps beam supported and centered while it exits shear. Main control is wired to accommodate preheat/quenching system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Rotary Shears | Beam Shears | Splitting Shearing Machinery | Metal Splitting Cutters

Ejector Blades come in more than 90 size combinations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:03 -0500

Made of M2 steel and through-hardened to 58-62 HRC for wear resistance, Inch Ejector Blades come in variety of thicknesses, widths, and lengths to fit individual needs of each project. Units feature one-piece construction with annealed heads, and are suited for electrical and electronics applications, such as cell phone covers or electrical connectors.

This story is related to the following:
Portable Tools

Search for suppliers of: Ejector Punches

End Mills are suited for aluminum materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Jul 2008 08:01:49 -0500

Allowing chatter free machining at high RPM and on heavy cuts, End Mills consist of 2 and 3 flute tools for roughing and finishing applications with large selection of corner radii and neck and flute lengths. For machining centers with coolant through spindle capabilities, flute tools with coolant through design directs coolant at cutting edge. Coolant provides lubricant, dissipates heat, and clears chips.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Cutting Tools | Aluminum End Mills | Roughing End Mills

Angle Grinder is suited for metal and concrete cutting.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jul 2008 07:41:33 -0500

Measuring 4½ in., Model W8-115 Quick Angle Grinder features cool flow technology with repositioned brushes for unrestricted airflow. It has 8.0 A motor with 800 W of power, 19.5 in./lb of torque, and no-load speed of 10,000 rpm. Weighing 6.2 lb, tool includes double lipped labyrinth sealed bearings, winding protection grid, epoxy coated windings, racket and dual grip zones for ergonomic handling, anti-vibration side handle, and Quick tool-less wheel change system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Metal Cutting-Off Machinery | Concrete Grinders | Electric Grinders | Portable Grinders | Cutting Tools | Grinding Tools | Power Tools

Cutter and Reamers handle stainless steel applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:19 -0500

Though specifically designed for use on stainless steel, Model 35S Tubing Cutter cuts copper, steel, and aluminum tubing. It features ergonomic X-CEL knob and roller bearings that minimize friction while optimizing cutting speed. Constructed of hardened steel, Models 227S and 223S inner-outer reamers include integrated measurement tools. Model 227S features 45 cutting edges to allow for inner reaming and outer deburring or beveling of ½-2 in. tubing, while Model 223S has 36 cutting edges.

This story is related to the following:
Portable Tools

Search for suppliers of: In-Line Tubing Cutters | Hand Reamers

Hand Tools include integrated voltage sensor.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:34 -0500

Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Portable Tools
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Multi-Function Hand Tools | Hand Tools | Electricians' Tools | Wire Strippers | Screwdrivers | Electricians' & Linemen's Pliers | Voltage Detectors | Utility Knives

Inserts are designed for machining stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 May 2008 07:39:18 -0500

KC9225(TM) inserts reduce chip hammering and built-up edge conditions, preventing insert damage in applications demanding continuous to lightly interrupted cuts at high cutting speeds. Deformation resistance combined with sharp cutting edges makes units suitable for machining austenitic stainless steels, when machining at speeds in excess of 550 sfm. Applications include medical and food industries, flange manufacturing, chemical industry, and oil and petrochemical businesses.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Portable Tools

Search for suppliers of: Machine Tool Inserts | Stainless Steel Inserts | Cutting Tools

Hole Saws are cryogenically hardened .

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 May 2008 07:36:02 -0500

Featuring Matrix II bi-metal construction and precision-ground tooth geometry, Ice Hardened(TM) hole saw is suited for metal and wood cutting in wide variety of HVAC, electrical, plumbing, and maintenance/repair applications. It features positive rake angle for fast cutting, radiused tooth back that helps reduce stress on teeth, and deeper gullets that quickly remove chips. Including 49 models, hole saw comes in variety of diameters as well as kits that range from 10-28 pieces.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wood Cut-Off Saws | Hole Saws | Metal Cutting Saws

Nibbler cuts in 4 directions.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Apr 2008 07:40:14 -0500

Nibbler N500-8 operates in reverse and in 4 directions, enabling users to move tool horizontally toward them or vertically from top to bottom. Weighing less than 9 lb, it features 1,400 W motor and operates in tight spaces. Device can cut through sheet metal up to 0.197 in. thick and SS 0.125 inches thick with working speed of 4.9 fpm. It can also cut through workpieces with 90° bends and double sheeting, such as tanks, containers, and guard rails.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Metal Cutting Tools | Portable Electric Nibblers

Combination Scissors feature 2-in-1 cutting blade.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Apr 2008 07:40:10 -0500

Measuring 6.5 in. long, Model 11080 features soft grip handle and stainless steel blades with HRC 54 hardness. Notched blade prevents material from slipping, and scissors can cut through aluminum and copper sheets up to 0.5 mm thick, plastic plate and PET up to 1.0 mm thick, and braided wire up to 1.5 mm dia. U-type blade holds items such as copper wire, cabtire cord, and various types of cotton braided and insulated cords, up to 1.5 mm dia, firmly in place to produce clean cut.

This story is related to the following:
Portable Tools

Search for suppliers of: Stainless Steel Scissors

Battery-Powered Tool cuts steel in 4-5 sec.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:20 -0500

ETS12 can be used to cut mild steel products such as bolts, threaded rod, solid hasp and cable hasp one-time locks, and shipping container seals. When cut is complete, ram automatically retracts to be ready for next cut, with 100 cuts per battery charge. Compact tool is 14 3/8 in. long with cutting head that rotates 350° and includes 2 batteries. Charger and molded carrying case is also included.

This story is related to the following:
Portable Tools

Search for suppliers of: Cutting Tools | High Speed Steel Cutting Tools

Gas Saw offers high-performance for deep cuts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:04 -0500

Hilti DS-HS 80 V2 Hand-Held Gas Saw features carburetor setting for handling acceleration, along with narrow tool body and tall motor for balance and minimized vibration. It includes starter assembly, cool running motor, and tank geometry that optimizes fuel intake. Reversible steel flanges allow stocking of multiple blade types. Selection of diamond blades for variety of applications and base materials are available.

This story is related to the following:
Portable Tools

Search for suppliers of: Electric, Portable Hand Saws

Insert Grade is suited for steel turning.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Apr 2008 07:44:52 -0500

Providing high metal removal rates and process stability in steel turning applications, Model GC4205 offers roughing to medium- and semi-finishing, and is designed for applications where high cutting temperatures are generated. It includes option for turning hard materials with HB greater than 270, and allows cutting speeds of more than 800 fpm. Unit features improved crater wear and plastic deformation resistance.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Machine Tool Inserts | Cutting Tools | Turning Tools

Threading Tool is offered in 0.5 and 0.625 in. insert sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Mar 2008 07:38:48 -0500

CoroThread 266 threading tool is suited for oil, gas, and mechanical engineering industries. It features iLock insert locking system that simplifies tool set-ups, eliminates potential insert movement during machining, provides repeatability, and disperses cutting forces with no pressure points, reducing strain on both tool and insert. Capable of minimizing machining vibration, threading tool comes with E-tolerance of 0.0004 in. axially and 0.02 in. radially.

This story is related to the following:
Portable Tools

Search for suppliers of: Cutting Tools | Threading Tools