ThomasNet Industrial Newsroom -

Water-Borne Epoxy Coating creates fast-drying floor finish.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jul 2008 07:41:21 -0500

With mix ratio of 4A:1B, Monomid(TM) Epoxy Flooring System forms cleanable, high-gloss finish. It offers 5 mils DFT in one coat when applied over Monomid Clear Sealer and can be applied over various other primers for application on steel. Solution supports addition of anti-slip aggregate or sand and also offers moisture resistance. In 3 hr at 77ºF, coating dries to touch to form abrasion- and chemical-resistant finish. Use is suited for industries requiring low odor and VOC levels.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Epoxy Flooring | Epoxy Finishes | Epoxy Coatings | Epoxy Building & Construction Coatings

Solar Reflective Coating is suited for green building market.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:39 -0500

Flurospar® SR is used to coat aluminum windows, curtain walls, shutters, awnings, louvers, wall panels, and other building components. Spray-applied, factory cured coating is formulated with solar reflective pigments that keep building components cool. Available in white, black, green, blue, brown, and red, eco-friendly and mar-resistant coating minimizes need for touch-up/repainting. Pearlescent effects are also available in Flurospar SR Classic II formulation.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Aluminum Paints | Architectural Paints | Multicolor Paints | Reflective Paints | Wall Paints | Architectural Coatings | Building & Construction Coatings | Environmental Coatings | Paint Base Coatings

Interior/Exterior Primer imparts corrosion protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:36 -0500

Water-reducible alkyd primer, Aquacron 835, is suited for industrial use on bare metal surfaces where corrosion resistance is needed. It can be top coated with water reducible alkyd enamels or solvent-based enamels in field after thoroughly dried and contains no heavy metals. Along with less than 1 lb of organic HAPS/gallon of solids, low-odor primer features 2.8 lb/gal VOC-compliant formulation compatible with tap water reduction.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Primers | Industrial Primers

Water Reducible Enamel works on metal surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:36 -0500

Formulated for accelerated drying times, Aquacron 880 Series interior/exterior enamel is intended for industrial use on bare or primed metal surfaces. Low-odor solution contains no heavy metals, comes in range of colors and gloss, and has no recoat window. Water can be used for reduction and clean-up, and product can be formulated to 2.8 VOC (less water) compliance.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Enamels | Water Based Enamels

Polyester Urethane Enamel protects steel surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:36 -0500

Applied directly to cleaned or blasted steel, Spectracron 380 promotes surface protection and color/gloss retention. This 2-component exterior-grade enamel has blended VOC of 3.5 lb/gal max and imparts resistance to chemicals, abrasion, and impact. There are no hazardous air pollutants or SARA 313 constituents, and various colors and glosses are available. Poly-Iothane HS can be applied directly to cleaned or blasted steel as well as over 2K epoxy or polyurethane primers.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Corrosion Resistant Enamels | Steel Enamels

Epoxy Primer is designed for wet-on-wet spray application.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:36 -0500

Promoting corrosion resistance over cleaned and treated steel, Spectracron 560 suits short wet-on-wet application windows when topcoated with Spectracron 2K polyurethane enamels; polyurethane topcoat can be applied directly over this primer 10-15 minutes after application. Formulated with VOC less than or equal to 3.5 lb/gal and less than 0.17 lb HAPS/gal, this 2-component, chrome-free primer adheres to cleaned G90 galvanized steel and aluminum as well as fiberglass substrates.

This story is related to the following:
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Epoxy Primers | Corrosion Inhibitors | Industrial Primers

Primer protects bare metal surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:35 -0500

Suitable for interior and limited exterior applications, Aquacron 833 can be field top coated with water reducible alkyd enamels or solvent-based enamels after thoroughly dried. Low-odor product contains no heavy metals, is VOC-compliant, and has less than 1 lb of organic HAPS/gal of solids. Applications include metal fabrication, structural steel, industrial machinery, cabinets, racking, and shelving.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Industrial Primers

Urethane Coating targets exterior applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2008 07:38:59 -0500

Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Urethane Coatings | Chemical Resistant Coatings

Primers are offered in latex- and oil-based versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:27 -0500

Developed for painting contractors, low VOC ZAP Interior/Exterior Latex Primer blocks typical household stains caused by wax crayons, pencil, pen, china markers, ketchup, mustard, and grease. ZAP Interior Oil-Based Primer blocks difficult-to-remove stains including those from smoke, fire, water damage, and tannin bleed, and seals in odors such as nicotine, fire/smoke damage, and pet odors. Both provide mildew resistant finish, require one-coat application, and typically dry in 1 hr.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Industrial Primers

Semisolid Primer optimizes anaerobic adhesive performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Apr 2008 07:51:43 -0500

Loctite® QuickStix(TM) 7088(TM) Primer enhances performance and accelerates cure of anaerobic machinery adhesives used in threadlocking, thread sealing, gasketing, and retaining applications. Featuring environmentally friendly formulation free of solvents and VOCs, product is recommended for use on plated, anodized, and galvanized parts as well as inactive metals. It may also be used on cold metals and assemblies that feature large gaps or deep threads.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Primers

Urethane Topcoats meet stringent VOC requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Mar 2008 07:35:33 -0500

With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Topcoat Coatings | Chemical Resistant Coatings | Urethane Coatings

Primer/Surfacer suits spray and roll-on applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Dec 2007 07:44:26 -0500

Featuring hide and self-leveling characteristics, ProRoc ® Level V Wall and Ceiling Primer/Surfacer is polyvinyl alcohol product that creates smooth wall finish and takes Level 4 wall finish to Level 5 without need to putty or skim coat. It meets American Society for Testing and Materials (ASTM) and Gypsum Association (GA) specifications for Level 5 finishes.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Wall Coatings | Primers | Surfacers

Clear Urethane Coating is ANSI/ESD-S20.20 compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 Nov 2007 07:42:03 -0500

Licron Crystal(TM) is permanent static dissipative coating that adheres to metal and plastic surfaces, operates from 0-100% humidity, and maintains 107-109 <font face='Symbol'>W</font> resistivity. It can convert standard bumpers, bins, tools, and other surfaces into ESD-safe products. Applications include electronic assembly work stations, bins, carts, and trays, packaging for sensitive components, production conveyors and bumpers, and static protection for electronic devices.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Clear Coatings | ESD Coatings | Aerosol Coatings | Protective Coatings | Urethane Coatings

Waterborne Primer is designed for wood and composite uses.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Oct 2007 07:47:05 -0500

One-Pass Primer low VOC waterborne primer covers most substrates like radiata pine, MDF, hardboard, dark-stained poplar, sugar pine, and yellow pine. Features include suitability for both indoor and outdoor use and wide range of color choices. Primer can be applied via various spray methods, including roll coat, curtain coat, vacuum coat, or fancoat, and can be top-coated with high quality latexes.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Paints

Urethane Mortars protect floors from harsh conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Oct 2007 08:11:19 -0500

Applied by roller, MORTARTHANE(TM) SL is self-leveling, durable floor topping that withstands repeated exposure to hot oil or steam without pitting or cracking. It is packaged in premeasured components in 5 gal unit covering 32 sq ft at 3/16 in. deep. MORTARTHANE(TM) HF is trowel-applied and packaged in 5 gal units covering 18 sq ft at ¼ in. deep. Both thermal shock-resistant resurfacers meet USDA, FDA, and OSHA standards.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Floor Resurfacers | Urethane Coatings

Coating withstands extreme exterior exposures.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Oct 2007 07:46:56 -0500

Providing lasting color and gloss retention, FluoroKem Fluoropolymer Urethane Finish is graffiti, chemical, and abrasion resistant, and meets AWWA performance standards. Product has VOCs less than 340 g/l and can be applied by brush, roll, or spray to primed steel, galvanized steel, or aluminum. Applications include convention centers, water tanks, casinos, and other highly visible areas.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Urethane Coatings | Fluoropolymer Coatings

Sealer utilizes nanotechnology to offer inter-coat adhesion.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Oct 2007 07:57:52 -0500

Type SCS-002-SP Sealer Prime incorporates active silanol group and nanoparticulate that provides chemical interaction and bonding to ensures topcoat adhesion. It also maintains color integrity during erecting new or rehabbing older structures. Available in 5, 55, and 275 gal containers, sealer produces waterproof, UV resistant, and highly adhesive clear priming treatment in 1 or 2 coats, depending upon porosity of material.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Acrylates | Water Based Adhesives | Industrial Primers | Sealers

Aerosol Touch-Up Paint matches existing powder coatings.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Sep 2007 07:45:53 -0500

Intended for industrial finishers, POWDURA® Color Selector Touch-Up program facilitates touch-up process for powder coated products. Coatings are supplied in 12 oz spray-cans and can be used over POWDURA Powder Coatings. While standard products are available in 25 Sherwin-Williams colors, any of 100+ additional colors can be ordered by referencing POWDURA Color Selector color card.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Aerosol Touch-Up Paints

Primer meets federal standards for HAPS emissions.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Sep 2007 07:45:53 -0500

Designed to optimize appearance of high-gloss acrylic and alkyd topcoats, KEM®-FLASH 500 Primer creates dense, uniform base that promotes topcoat holdout. It provides resistance to salt spray, humidity, and corrosion, and forms strong bond when applied to properly prepared aluminum, steel, iron, and galvanized surfaces. Applied with airless, air-assisted, or HVLP spray methods, primer is suited for off-road vehicles, construction machinery, and farm equipment.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Primers

Alkyd Glazes feature HAPS-compliant formula.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Sep 2007 07:45:53 -0500

Suited for use with catalyzed coatings, KEMVAR® Glazes can be applied by brush or spray, and are available in Van Dyke Brown, Natural, and White. Products are formulated for optimal adhesion between coats and even over unsanded pigment base coats. Offering 10 min of open time, glazes can be coated with sealers and are suited for color and accenting details of cabinetry and other interior woodworking.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Alkyd Coatings