ThomasNet Industrial Newsroom -

Lightweight Coating creates polished/cut granite appearance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:22 -0500

Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Acrylic Coatings | Finishes

Sealer and Finish suit high-impact sports hardwood floors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Feb 2008 07:55:14 -0500

Drying in as little as 2 hr, polyurethane Valsport WP-4.1 Fast Dry 350 Sanding Sealer is formulated to seal bare wood floors and produce optimum clear surface for finish coats. Valsport WP-8.1 Sports Floor 350 Finish is clear and ages to naturally golden amber while protecting wood. Both durable oil-modified urethanes have VOC levels of less than 350 g/L and can be used individually with compatible products or together as complete wood finishing system.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Floor Sealers | Gymnasium Floor Finishes

Finishing Solution forms Verdi green finish on surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Dec 2007 07:44:27 -0500

Intended for copper, brass, and bronze surfaces, PATINA GREEN(TM) liquid achieves 2 different types of finishes. For bright green or mint green finishes, product can be applied directly onto surface using brush, dipping, or spray. For slightly muted tones that are somewhat opaque, solution can be applied as secondary treatment over top of brown or black colored base coat. PATINA GREEN comes in 1, 5, and 55 gallon containers.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Finishes | Pigmented Finishes

Industrial Floor Finish withstands high-traffic areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Oct 2007 07:43:09 -0500

Available in 13 different color pigments, FLO GLAZE ES provides hard surface that is resistant to abrasion and impact. Product is suitable for use on any indoor floor and meets VOC regulations for all states, including OTC states, but excluding California.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Floor Finishes

Cold Blackener is used for touch-ups in machine shops.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Sep 2007 08:05:43 -0500

When applied to any clean ferrous metal surface, PRESTO BLACK® BST4 blackens within 30 sec and forms finish that can be topcoated to form protective black oxide finish. Brush-on liquid serves as fast-acting blackener of re-machined areas or reworked metal parts, repairing scratches or damaged areas. Suited for use on all iron and non-stainless steels, product blends with existing black oxide finishes and withstands same degree of salt spray exposure.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Materials and Material Processing

Search for suppliers of: Blackening Metal Finishes | Corrosion Resistant Coatings | Black Oxides

Wood Finish contributes to LEED certification.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Aug 2007 07:39:55 -0500

Applied using environmentally friendly process, Clarity(TM) Finish includes wash, sealer, and top coats. Since it is water-based, wood casegood product is Indoor Advantage(TM) certified for indoor air quality. Finish allows repairs to top coat should damage occur, and provides consistency and clarity that allow natural look of wood to come through.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Wood Finishes

Black Oxide Finish protects oil/gas drilling components.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 May 2007 08:46:30 -0500

In addition to creating protective barrier against corrosion, TRU TEMP® black oxide finishing process offers break-in lubricity and anti-galling protection. Finish complies with MIL-DTL-13924, Class 1 and withstands 100-300 hr salt spray. Suited for valves, pumps, couplings, packer glands, and associated equipment, process forms non-dimensional, deep black finish; is pollutant-free; and operates at 200°F. Total process time is 25 min.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Services

Search for suppliers of: Black Oxide Finishes | Black Oxidizing Finishing, Processing & Treatment Services | Industrial Finishes

Finishing Solution produces wide range of brown tones.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Jan 2007 06:58:55 -0500

Designed for use on copper, brass, bronze, iron, and steel substrates, Antique Brown® M38 enables brush-on finishing of large surfaces or immersion finishing in batch quantities. When desired color tone is achieved, reaction is stopped by rinsing metal surface with water. Once dried, resulting finish can be highlighted or distressed, if desired, to produce oil-rubbed bronze finishes or rich leather-brown tones. Process is odorless and operates at room temperature.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Finishes | Pigmented Finishes

Floor Finish suits high traffic areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Apr 2006 08:08:27 -0500

High-solids, low-odor High Mileage provides optimized gloss build and offers black heel mark/scratch resistance. Up to 5 coats can be applied in one application without signs of stressing. Finish performs well in less-than-ideal environmental conditions such as high or low humidity. Its properties make it suited for 24-7 facilities such as hospitals or retail environments with busy aisles and hallways.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Floor Finishes

Finishing Process offers corrosion resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 31 Jan 2006 07:20:48 -0500

With processing time of 25 min, TRU TEMP black oxide finishing system operates at 200°F, eliminating splattering and boilover hazards. Nonpolluting system is free of EPA regulated chemicals and uses mild solutions that prevent formation of red coatings and white salt leaching. Suitable for finishing tooling components such as toolholders, workholding, and turret press tooling, it can process small parts in bulk loads while larger tools can be finished on racks.

This story is related to the following:
Material Handling and Storage
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Finishes | Blackening Metal Finishes | Corrosion Resistant Coatings | Finishing Systems | Black Oxide Finishes

Polymer-Based Finishing Solution promotes wear resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jan 2006 07:10:31 -0500

Super-Finishing produces low roughness while hardening metal surface using single mechanical process. Mechanical lapping process creates organic layer that bonds into metal surface through chemical reaction, affecting surface roughness average, mean roughness depth, amplitude, and bearing area curve. Environmentally friendly solution does not use hazardous waste materials and can be applied to cylindrical parts, flat surfaces, and various metals.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Material Handling and Storage

Search for suppliers of: Finishing Systems | Metal Finishes

Antiquing Gels suit staircase railings and wall panels.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Nov 2005 07:06:27 -0500

Intended for large part finishing and in-place components, Antiquing Gels cling to vertical surfaces and stay where they are applied, without forming runs and drips or bleeding onto adjoining surfaces. After surface is cleaned using solvent cleaners or abrasive pads, user applies layer of antiquing Gel with synthetic paintbrush, allowing Gel to work for 2-10 min. When desired depth of black or brown tone is achieved, Gel is rinsed off with wet sponge and surface is dried.

This story is related to the following:
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Blackening Metal Finishes | Metal Coating Compounds | Gels

Surface Finishes do not contain lead or cadmium.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Jul 2005 08:14:51 -0500

Lead- and Cadmium-Free Electroless Nickel surface finish is electroless nickel process yielding mirror bright nickel phosphorus alloy that offers corrosion resistance, uniformity of coverage, and repair and salvage capabilities. Trivalent Chromate Conversion Coating produces protective coating on pure aluminum, zinc, and anodic aluminum. It minimizes corrosion, provides bonding surface for paints, and appears faint blue to tan and iridescent.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Material Handling and Storage
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Finishing Systems | Protective Finishes | Metal Finishes

Floor Coating protects surface from scratches.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Mar 2005 07:20:38 -0500

WoodStar® Satin Wood Floor Finish consists of internally cross-linked, 1-component coating that provides stable, low-gloss film for slip resistance without burnishing. Water-borne, low-odor material is suited for protection of all commercial wood floors.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Wood Coatings | Non-Slip Floor Coatings | Floor Finishes

Steel Blackener is offered in gel formulation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Feb 2005 07:42:26 -0500

Precision Brand® Tool Black® Gel blackener blackens large, vertical, or intricate areas of steel surfaces. Dripless formula achieves uniform black cosmetic finish on most ferrous metals up to RC50. It suits prototype work, auto repair and restoration, arts and crafts, OEM finishing, decorative hardware, and general MRO toolroom applications.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Surface Coatings | Black Oxide Finishes

Finishing Chemicals are suited for nonwovens.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Aug 2004 08:02:40 -0500

Synthebond line of polymers, resins, finishes, and fluorochemical extenders are engineered to deliver hand and color fastness, abrasion resistance, oil and water repellency, and increased strength and rigidity for nonwoven applications. Finishing chemicals feature range of binders, performance finishes, softeners, and soil release agents that optimize performance of products such as window coverings, medical gowns, consumer wipes, and filtration systems.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Fluorochemicals | Extenders | Finishes | Polyester Resins | Polymers

Antiquing Concentrate works on various metal surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Jul 2004 07:43:07 -0500

Suited for producing brown and black finishes, M25 Antique Black® may be used on copper, brass, and bronze alloys as well as zinc die castings and zinc plated surfaces. Product, mixed with water at 10-20%, is suited for blackening or browning copper and brass alloys. Mixed at 5-10%, product is suited for blackening zinc. It works at room temperature, forming tightly adherent conversion coating with immersion times from 30 sec to ~3 min.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Blackening Metal Finishes

Blackening Gel works on iron and steel substrate parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Apr 2004 07:45:09 -0500

Available in 1 and 5 gal containers and ready for application, PRESTO BLACK® GEL can be used on any size part in limited quantities. After cleaning part surface, user swabs on layer of product with synthetic paintbrush and allows Gel to work for 2-10 min. Gel adheres to metal surface and blackens uniformly without running off, even on vertical surfaces. Resultant protective black finish inhibits water-spotting and corrosion during drying.

This story is related to the following:
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Blackening Metal Finishes | Blackening Compounds

Antique Finishes provide accurate coloration.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Nov 2003 07:43:39 -0500

Antique Finishes provide range of colors and tones on most metal surfaces including steel, brass, bronze, copper, pewter, aluminum, silver, nickel, and zinc. Color ranges can include black, golden to chocolate browns, and other red or green color variations, depending on application. Processes are operator-friendly, utilizing room temperature solutions that produce no fumes. Finishes are suited for short run or high volume production process lines.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Finishes

Epoxy Floor Resurfacer creates chemically resistant surface.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Aug 2003 08:07:00 -0500

Non-shrink TREFLITE(TM) bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are required for application. Each 5 gal pail covers 40 ft² at 1/8 in. deep.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Epoxy Coatings | Non-Slip Floor Coatings | Floor Finishes | Floor Resurfacers