ThomasNet Industrial Newsroom -

Stain Blocking Coating protects concrete surfaces.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:24 -0500

Formulated as water-based hybrid resin system, API-278 Stain Blocking Polish(TM) provides deep-penetrating, high-gloss, stain-resistant finish for new densified concrete surfaces. It can be used as primary coating or as protective layer under traditional concrete polish systems. Surfaces coated with API-278, which forms non-sacrificial surface that can be buffed/burnished to high gloss, will exhibit resistance to wear, moisture, and staining.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Wear Resistant Coatings | Water Based Coatings | Corrosion Resistant Coatings | Coating Resins

Waterborne Resin suits wood and furniture coatings.

info@productnews.com (ThomasNet News) — Wed, 15 Jul 2009 08:31:52 -0500

Bayhydrol AH XP 2741 high-molecular-weight, polyacrylate dispersion is solvent-free and is suited for formulation of low- to no-VOC, 1-component coatings for indoor wood floors and furniture. Clearcoats formulated with styrene-acrylate copolymer resin accentuate wood grain and provide chemical resistance. Resin can be used to formulate primers, high-gloss or semi-gloss coatings, and in combination with polyurethane dispersions and UV-cured coatings.

This story is related to the following:
Chemical Processing and Waste Management
Paints and Coatings
Materials and Material Processing
Green & Clean

Search for suppliers of: Water Borne Resins | Styrene Resins | Coating Resins | Acrylic Resins | Dispersions

Color Masterbatches target wire and cable industry.

info@productnews.com (ThomasNet News) — Thu, 02 Apr 2009 08:40:29 -0500

Suited for coloring complex melt processable fluoropolymer resins used as plenum space jacketing materials, MPFP Color Masterbatches come in 10 color-coding formulations matched to Munsell and RAL standards. Products are available in FEP and PVDF resin systems and are expandable to include other MPFP resins as needed. They maintain inherent flame retardancy and low smoke emissions that allow fluoropolymers to be used as jacketing material for plenum spaces.

This story is related to the following:
Paints and Coatings
Materials and Material Processing
Chemical Processing and Waste Management

Search for suppliers of: Encapsulation Resins | Colorants | Plastic Additives

Solvent-Free Resins meet VOC requirements for green coatings.

info@productnews.com (ThomasNet News) — Tue, 06 Jan 2009 08:37:08 -0500

Suited for formulating industrial water-based coatings, SF18(TM) and SF26(TM) solvent-free translucent aliphatic waterborne urethane resins offer hardness, high gloss, and chemical and abrasion resistance properties. Single-component, ultra-low VOC products help formulate non-yellowing floor coatings, which have appearance of solvent-borne coatings and can be applied with no odor.

This story is related to the following:
Paints and Coatings
Chemical Processing and Waste Management

Search for suppliers of: Coating Resins | Urethane Resins | Water Borne Resins

Epoxy Resin offers dimensional stability.

info@productnews.com (ThomasNet News) — Tue, 08 Apr 2008 07:55:14 -0500

Suited for bonding, encapsulation, and coating, 2-component EP21LM-3 develops tensile modulus greater than 100,000 psi and tensile shear strength greater than 2,300 psi. Viscosity of 37,000 cps enables product to flow evenly and smoothly without application of pressure. When cured, polymer has Shore D hardness of 64 and resists thermal cycling as well as water, oil, fuels, and most organic solvents over temperature range of -65 to +250°F.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings

Search for suppliers of: Epoxy Resins | Encapsulation Resins | Epoxies

Polycarbonate Films offer protective coating for electronics.

info@productnews.com (ThomasNet News) — Tue, 27 Nov 2007 07:54:03 -0500

Lexan DMX polycarbonate films include Lexan DMX 1HD00-112 film that is polished on both sides and Lexan DMX 1HDA3-112 film that is polished on one side and matte on other. Featuring layered construction that utilizes DMX resin, films offer pencil hardness rating of 1H as well as impact, chemical, saltwater, and isopropanol resistance. They can be fabricated with Insert Mold Decoration graphics and be thermoformed to greater than or equal to 35 mm draw depth.

This story is related to the following:
Chemical Processing and Waste Management
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Electronic Coatings | Resin Coatings | Polycarbonate Film

Conductive Resins are optimized for powder coating.

info@productnews.com (ThomasNet News) — Tue, 10 Apr 2007 07:41:53 -0500

Able to replace metal substrates in powder coating applications, environmentally responsible Noryl GTX(TM) resins contain conductive fillers that eliminate need to apply electrostatic primer. Grades make it possible to powder-coat metal and plastic on same production line, and can eliminate chemical cleaning and pretreatment of metallic parts when used as substrate. Products consist of polyamide blend with modified polyphenylene ether reinforced with conductive filler packages.

This story is related to the following:
Chemical Processing and Waste Management
Paints and Coatings
Green & Clean

Search for suppliers of: Adhesive Resins | Coating Resins | Polyamide Resins

Epoxy Resin Compound features high thermal conductivity.

info@productnews.com (ThomasNet News) — Fri, 09 Feb 2007 07:17:44 -0500

Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ft²/hr/°F and volume resistivity of 1,012 <font face='Symbol'>W</font>cm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or volume, working life of 90 min for 100 g mass, tensile strength of 1,070 psi, and T-peel strength of 15 pli.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Epoxy Adhesives | Thermally Conductive Adhesives | Adhesive Coatings | Conductive Coatings | Epoxy Coatings | Thermally Conductive Coatings | Adhesive Compounds | Conductive Compounds | Encapsulation Compounds | Adhesive Resins | Encapsulation Resins | Epoxy Resins

Masking Material protects metal component surfaces.

info@productnews.com (ThomasNet News) — Tue, 29 Aug 2006 07:42:14 -0500

Available in gel, brush-on, or spray-on formulations, SpeedMask® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily peels, dissolves in water, or burns off once the surface treatment process is completed.

This story is related to the following:
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Coating Resins | Temporary Masking | Removable Protective Coatings

Resin offers alternative to paint with metallic effects.

info@productnews.com (ThomasNet News) — Mon, 27 Jun 2005 07:50:43 -0500

Cycoloy Engineered Filler Resin provides sparkle effect while helping to eliminate flow lines. Based on flame-retardant Cycoloy resin matrix, halogen-free product features UL94 VO and 5 Va ratings, as well as deflection temperature of 85°C. Resin offers range of surface finishes, from rough to silky and matte to glossy. Metallic effect is suited for electronic devices, personal care products, small appliances, and telecommunications devices.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Coating Resins

Encapsulating Resin can cure with several agents.

info@productnews.com (ThomasNet News) — Thu, 20 Jun 2002 07:58:32 -0500

Electronic grade, casting, potting, and encapsulating epoxy resin system No. 20-3651\40 adheres to metals, ceramics, and plastics. Physical properties include mixed viscosity of 32,500 cps at 25°C, specific gravity from 1.40 to 1.45 at 25°C, and Shore D Hardness rating of 85 to 88. Tensile Strength ranges from 6,100 to 9,200 psi, and operating temp ranges from -40 to +30 and -65 to +105°C.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Epoxy Resins | Encapsulation Resins | Adhesive Resins

Adhesive/Sealant bonds and encapsulates.

info@productnews.com (ThomasNet News) — Mon, 29 Apr 2002 07:49:38 -0500

MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is -40 to 125 deg C.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Encapsulation Resins | Bonding Resins | Sealants | Adhesives

Phenolic Resin Coating cures in one hour at 350°F.

info@productnews.com (ThomasNet News) — Fri, 21 Dec 2001 13:28:44 -0500

PR1010 black phenolic resin resists chemicals and retards oxidation. It can be used as final coat on metal components, or as primer on metal prior to bonding. It promotes bond longevity by inhibiting oxidation at bond joints. Application process involves lightly grit-blasting surface with aluminum oxide, then spray coating. Process eliminates need for phosphoric acid etch. Coating thickness is typically applied 0.0005 in. ± .0002 in.

This story is related to the following:
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Resin Coatings