ThomasNet Industrial Newsroom -

Coating provides low frequency magnetic shielding.

info@productnews.com (ThomasNet News) — Mon, 17 Nov 2008 07:14:34 -0500

Designed to provide low frequency magnetic shielding to polymer, composite, and metal parts, Nanovate(TM) EM coating can be applied selectively, allowing shielding performance to be focused where it is needed on part. Coating can be used to stiffen and strengthen shielded polymer, composite, and metal substrates. Product suits sensors, transducers, and other applications sensitive to low frequency magnetic interference.

This story is related to the following:
Paints and Coatings
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: EMI/RFI Shielding Coatings | Metal Coatings | Polymer Coatings

Heat-Resistant Coatings withstand chemicals and weather.

info@productnews.com (ThomasNet News) — Wed, 30 Apr 2008 07:44:22 -0500

Thurmalox® 8886 Series delivers long-term protection in weathering conditions and creates barrier against attack from glycol cooling agents and synthetic lubricants at temperatures up to 450°F. Available in clear, black, and custom OEM colors, these 2-component silicone copolymer coatings can be applied by conventional and airless, HVLP, HTE, or assisted airless spray equipment. Coatings adhere to clean, smooth steel, copper, and aluminum substrates.

This story is related to the following:
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Silicone Coatings | Polymer Coatings | Heat Resistant Coatings | Chemical Resistant Coatings | Protective Coatings

Polymer System cures by UV light and/or heat.

info@productnews.com (ThomasNet News) — Wed, 19 Mar 2008 07:37:44 -0500

One component, optically clear, non-yellowing UV15-7DC is designed for bonding, sealing, and coating applications. Cure times range from 5 sec to 2-3 min depending upon wave length, intensity of UV light, and thickness being cured. Heat curing schedules are 10-30 min at 250-260°F. System adheres to glass, metals, plastics, polyester films, and polycarbonates, and exhibits Shore D hardness of greater than 70 and elongation of 65-75%. Tensile strength is 5,460 psi.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Optically Clear Adhesives | Thermal Cure Adhesives | Polymer Coatings | Bonding Compounds | Sealing Compounds | Adhesive Coatings

Coating protects steel and fiberglass boat bottoms.

info@productnews.com (ThomasNet News) — Tue, 30 Oct 2007 07:48:23 -0500

Designed for marine vessel hulls, Ship and Boat Bottom Coating is polymer/ceramic-based and contains no TBT or VOCs. Powder coating has evenly dispersed active copper oxide and silver ions in polymer matrix that is fully melted when applied with thermal spray process. If there should be break or tear in coating, nylon modified fuse bond epoxy between hull and coating maintains integrity. Active ingredients are strongly held and always available in coating, minimizing ablating.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Protective Coatings | Powder Coatings | Polymer Coatings | Marine Coatings | Ceramic Coatings

Light Diffuser Masterbatches are formulated for LEDs.

info@productnews.com (ThomasNet News) — Wed, 13 Jun 2007 07:31:52 -0500

Light Diffuser Masterbatches are manufactured by using polymer-based diffusion compound formulated for polycarbonate, acrylic, and other clear plastics. Used to eliminate hot spots caused by LEDs in applications such as signage and illuminated knobs, products contain spherical polymer particles that scatter and spread light in plastic sheets and films to form even illumination, while allowing light transmission levels of 90% or more.

This story is related to the following:
Optics and Photonics
Paints and Coatings

Search for suppliers of: Light Diffusers | Polymer Coatings

Coating repairs corroded steel in power plants.

info@productnews.com (ThomasNet News) — Fri, 11 May 2007 08:38:35 -0500

With operating temperatures up to 400°F, single-part Corr-Paint(TM) CP2000 dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. Polymeric coating is resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids. Supplied with viscosity of 200-240 cps, product is applied in 4.0 mil wet film thickness that dries to approximately 2.0 mils. Application methods include brush, roller, or pneumatic spray equipment.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Polymer Coatings | Rust Removal Coatings

Silicone Polymer Compound cures with UV or RTV.

info@productnews.com (ThomasNet News) — Thu, 22 Jun 2006 08:00:11 -0500

Formulated to react with UV light and atmospheric humidity, UV71DC is suited for applications involving complex product geometries. Single-component product cures to produce optically clear, flexible, non-yellowing, and chemically resistant adhesive, sealant, or coating. Employed over -80 to +400°F range, compound exhibits thermal shock resistance and adheres to substrates from glass and aluminum to polyester films and polycarbonates. Tensile strength is 110 psi.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Silicone Adhesives | Silicone Sealants | Silicone Coatings | Polymer Coatings

Coating provides high-temperature corrosion resistance.

info@productnews.com (ThomasNet News) — Thu, 13 Apr 2006 07:29:46 -0500

Single-part, gray-pigmented Corr-Paint(TM) CP2020 polymeric coating dries and cures at room temperature to hard, non-porous, abrasion-resistant surface that is also resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids. Supplied with viscosity of 200-240 cps, product features specific gravity of 1.05 gm/cc. It provides corrosion resistance on steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Corrosion Resistant Coatings | Polymer Coatings | High Temperature Coatings

Coating provides high-temperature corrosion resistance.

info@productnews.com (ThomasNet News) — Thu, 05 Jan 2006 07:06:37 -0500

Single-part, aluminum-rich Corr-Paint(TM) CP2010 polymeric coating provides corrosion resistance on steel components exposed to oxidation and corrosive atmospheres to 400°F. It dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. Product is resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids, and also survives salt fog, salt spray, and humidity testing of over 1,000 hr. Coverage rate in 1.0 mil dry film is 722 ft²/gal.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Steel Coatings | Corrosion Resistant Coatings | Polymer Coatings

Polymers repair and prevent corrosion under insulation.

info@productnews.com (ThomasNet News) — Tue, 03 Sep 2002 07:51:50 -0500

Heat-activated Belzona® 1251 (HA-Metal) and Belzona® 5851 (HA-Barrier) repair and protect metal surfaces suffering from Corrosion Under Insulation (CUI). They apply directly onto hot surfaces, from 158 to 302°F. Both are single component and solvent free. Belzona 1251 paste-grade product rebuilds corroded areas and can be applied with spatula or applicator. Belzona 5851 coating-grade product can be applied by spatula, applicator, brush, or spray.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Polymer Coatings