ThomasNet Industrial Newsroom -

Coating offers corrosion protection to 1,500°F.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:47 -0500

Formulated using waterborne silicate binder system filled with blend of stainless steel and ceramic corrosion inhibiting pigments, Corr-Paint(TM) CP3015-SS is suited for coating carbon steel and cast iron heat exchangers, boiler components, and exhaust headers. Single part coating system is supplied in ready-to-use viscosity of 500-1,000 cP, is applied using conventional spray equipment, and dries to typical film thickness of 2-3 mils.

This story is related to the following:
Paints and Coatings

Search for suppliers of: High Temperature Coatings | Water Borne Coatings | Protective Coatings | Corrosion Resistant Coatings | Ceramic Coatings | Stainless Steel Coatings

Dichroic Spectral Metal Coatings withstand high temps.

info@productnews.com (ThomasNet News) — Mon, 26 Jan 2009 08:37:47 -0500

Applied onto thin stainless steel sheets via MicroDyn® sputtering technology, High Temperature Spectral Metal Coatings withstand temperatures up to 400°C. Coated sheets can be cut and formed to specific sizes and shapes, depending on customer requirements. Mounting features, such as slots, screw holes, and tabs can be formed into mirror after coating is applied, and sized mirrors can be formed into precise curves and cylinders with radii as small as 25 mm.

This story is related to the following:
Paints and Coatings
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Stainless Steel Coatings | Metal Coatings | High Temperature Coatings | Dichroic Coatings | Stainless Steel Sheets | Coated Sheets

Black Oxide Process takes 30 minutes for most alloys.

info@productnews.com (ThomasNet News) — Wed, 10 Dec 2008 07:45:59 -0500

LUMICLAD(TM) black oxide process is in-house method for blackening aluminum forming satin black finish on all aluminum alloys. Non-dimensional, 1.5 micron, LUMICLAD finish is tightly adherent to aluminum substrate with no ruboff. Process utilizes dip-tank procedure, without requiring electrolytic chemicals to form coating. Utilizing tank setup that operates at 70-200°F, process line is designed to operate as self-contained, zero-discharge system.

This story is related to the following:
Paints and Coatings
Services

Search for suppliers of: Aluminum Coatings | Black Oxidizing Finishing, Processing & Treatment Services

Coating provides low frequency magnetic shielding.

info@productnews.com (ThomasNet News) — Mon, 17 Nov 2008 07:14:34 -0500

Designed to provide low frequency magnetic shielding to polymer, composite, and metal parts, Nanovate(TM) EM coating can be applied selectively, allowing shielding performance to be focused where it is needed on part. Coating can be used to stiffen and strengthen shielded polymer, composite, and metal substrates. Product suits sensors, transducers, and other applications sensitive to low frequency magnetic interference.

This story is related to the following:
Paints and Coatings
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: EMI/RFI Shielding Coatings | Metal Coatings | Polymer Coatings

Silver Coating is used to reduce glare in halogen lamps.

info@productnews.com (ThomasNet News) — Tue, 02 Sep 2008 07:41:35 -0500

With low expansion, ceramic-metallic formulation that bonds well to glass and quartz halogen lamps, Quartz-Coat(TM) 845-Silver suits automotive, dental, aircraft, stadium, and fire safety industries. Product is water-based, odorless inorganic system that is silver in appearance and can absorb and evenly diffuse light at high temperatures of up to 2,000°F. It features viscosity range of 400-700 cps, solids content by volume of 42.0%, and dry film thickness of less than 1.0 mil.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Metallic Coatings | Ceramic Coatings | Silver Coatings | Water Based Coatings

Metal Coating suits UV curing and printing applications.

info@productnews.com (ThomasNet News) — Thu, 29 May 2008 07:40:56 -0500

Designed to maximize curing wavelengths between 220-400 nm and minimize rest of visible and IR spectrum from 450-2200 nm, UV Spectral Metal features MicroDyn® sputtering technology and is used as reflector behind curing lamp. Stable over temperature/humidity changes, it is coated onto highly polished, standard size aluminum sheets. With ability to customize/fabricate products after coating, long trough reflectors for inline exposure systems can be created using multiple lengths of product.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings

Search for suppliers of: Dichroic Coatings | Metal Coatings | Ultraviolet (UV) Coatings

Unified Coating suits surface preparation applications.

info@productnews.com (ThomasNet News) — Thu, 29 May 2008 07:40:23 -0500

Designed to replace phosphatizing and chromating systems, VpCI(TM)-440 protects multi-metal substrates from corrosion while preparing metals for surface bonding and coating. Non-toxic, non-hazardous, water-based coating can be applied with conventional equipment such as sprayers, dipping tanks, steam cleaners, and power washers. Self-preserving product is environmentally safe and does not require use of biocides.

This story is related to the following:
Green & Clean
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Corrosion Inhibitors | Water Based Coatings | Metal Surface Coatings

Gold Coating provides thermal control barrier.

info@productnews.com (ThomasNet News) — Thu, 10 Apr 2008 07:34:07 -0500

Thermal Foil Gold Coating is copper foil that is .001 in. thick, coated with Laser Gold. Laser gold plating reaches reflectivity of greater than 99% at 10 microns and greater than 98% at 1 micron. Optical coating and plating is ISO 9001:2000 certified and suited for automotive, aerospace, medical, R&D, electronic, and IR optical markets.

This story is related to the following:
Materials and Material Processing
Paints and Coatings
Services

Search for suppliers of: Copper Coatings | Thermal Barrier Coatings | Gold Plating | Coating Chemicals

Base Coating offers corrosion resistance for light metals.

info@productnews.com (ThomasNet News) — Thu, 03 Apr 2008 07:36:41 -0500

Based on titanium electrodeposited oxides, Alodine® EC2(TM) ElectroCeramic Coating provides chemical, corrosion, temperature, and abrasion resistance, extending life of parts exposed to harsh operating conditions. Product readily coats aluminum, aluminum alloys, titanium, and titanium alloys, as well as aluminized, aluminum-plated, and IVD aluminum substrates. Despite hardness of 800 vickers, coating is flexible and offers suitable base for paints, adhesives, sealants, and thermal spray coatings.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Corrosion Resistant Coatings | Abrasion Resistant Coatings | Aluminum Coatings

Boron Nitride Coating handles temperatures up to 1,560°F

info@productnews.com (ThomasNet News) — Thu, 17 Jan 2008 07:31:39 -0500

Pyro-Paint(TM) 634-BNSC is single part, odorless, water-dispersible coating formulated to resist molten metals, glasses, plastics, and salts as well as non-ferrous metals such as molten aluminum and magnesium. It provides highly lubricious and chemically resistant interface between molten material and underlying refractory structure. Applied with brush, roller, or spray equipment, coating dries at room temperature in 1-2 hr and cures fully in 1-2 hr at 200°F.

This story is related to the following:
Green & Clean
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings

Search for suppliers of: Water Based Coatings | Refractory Coatings | Protective Coatings | Metal Coatings | High Temperature Coatings

Iron Phosphate Coating works at low spray temperatures.

info@productnews.com (ThomasNet News) — Thu, 10 Jan 2008 07:15:47 -0500

Providing iron phosphate coating for ferrous metals, Chem Cote 3010 works at temperatures below 90°F, eliminating use of any burner. It is pre-paint treatment for iron and steel that makes resulting surface highly resistant to corrosion.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Rust Preventives | Corrosion Inhibitors | Permanent Protective Coatings | Phosphate Coatings | Metal Coatings

Zinc Coating provides corrosion protection.

info@productnews.com (ThomasNet News) — Mon, 03 Dec 2007 07:42:26 -0500

Made of 95% zinc, 1st Zinc is used on metal parts and assemblies as either protective primer coat to be later topcoated or as standalone coating. Formula provides corrosion protection in cold-galvanizing applications and meets requirements listed in ASTM-780, ASTM-D-520, Fed Spec DOD-P-21035A, MIL-P-26915A, and SSPC-Paint 20 specifications. Product is available in aerosol cans and bulk gallons.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings

Search for suppliers of: Zinc Coatings | Metal Coatings | Corrosion Resistant Coatings

Protective Coating works in temperatures up to 500°F.

info@productnews.com (ThomasNet News) — Tue, 30 Oct 2007 07:48:28 -0500

Used to protect metal components and structures in industrial applications, Corr-Paint(TM) CP2060 adheres to marginally prepared metal surfaces and is resistant to corrosion, chemicals, thermal shock, salt spray, and UV rays. Silicon carbide filled protective coating is offered as 2-part, 100% solids, epoxy-novolac, abrasion resistant system that mixes to thick paste and can be applied via trowel or spatula. It sets and cures fully at room temperature in 24 hr.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Protective Coatings | Iron & Steel Coatings | Corrosion Resistant Coatings | Chemical Resistant Coatings

High Temperature Coating provides corrosion protection.

info@productnews.com (ThomasNet News) — Fri, 28 Sep 2007 08:05:39 -0500

Suited for applications up to 1,100°F, brown-pigmented Corr-Paint(TM) CP4090 provides color identification on large aluminum and steel structures found in power plant, oil refining, chemical processing, and steel industries. Silicone-based, water dispersible coating adheres to sandblasted as well as marginally prepared metal surfaces. Once cured, CP4090 is color stable at high temperatures and resistant to oxidation, UV light, humidity, and salt spray.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Steel Coatings | Corrosion Resistant Coatings | Aluminum Coatings | High Temperature Coatings

Stainless Steel Paint touches up replacement parts.

info@productnews.com (ThomasNet News) — Thu, 06 Sep 2007 07:47:01 -0500

Featuring 316L SS leafing pigment that creates protective corrosion- and chip-resistant barrier, USDA-approved STEEL-IT® Anti-Rust Stainless Steel Polyurethane can withstand salt spray, UV light, chemicals, solvents, and detergents. Suited for food processing equipment and other environments that require frequent high-pressure power washing, paint can be brushed or sprayed onto parts such as motor mounts, drive components, and brackets.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Pressure Sensitive Coatings | Stainless Steel Coatings | Metallic Coatings | Polyurethane Coatings | Maintenance Protective Coatings | Metallic Paints | Rust Preventive Coatings

Coating System suits high temperature headers.

info@productnews.com (ThomasNet News) — Tue, 07 Aug 2007 07:43:50 -0500

Available in pint, quart, gal, and 5 gal pails, Corr-Paint(TM) CP3015-AL, ultra-high temperature coating is used to inhibit oxidation of carbon steel and cast iron exhaust headers used in automotive, truck, and industrial applications to 1400°F. It is formulated with advanced, waterborne silicate binder system filled with blend of aluminum and ceramic corrosion inhibiting pigments. Product is supplied in ready to use viscosity of 250-450 Cp and solids of 71.0% by weight.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Paints and Coatings

Search for suppliers of: High Temperature Coatings | Coating Systems | Aluminum Coatings | Ceramic Coatings

Roof Coating is aluminum colored to boost UV stability.

info@productnews.com (ThomasNet News) — Mon, 30 Jul 2007 07:54:44 -0500

Mold and fungus resistant CHEMTHANE 6100 is waterproof and features reflective rating of 0.52-0.62. Spray-applied hybrid polyurea cures to touch in less than 15 seconds, has tensile strength of 1,500 psi, and 250% elongation to withstand rigorous thermal conditions. Solvent-free, 100% solids, zero VOC coating can be used for spray polyurethane foam roofing, concrete, built-up roofing systems, single-ply sheet roofing, and steel.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Waterproof Coatings | Fungus Resistant Coatings | Reflective Coatings | Roof Coatings

Opaque, Silvertop Coating reduces glare in halogen lights.

info@productnews.com (ThomasNet News) — Mon, 18 Jun 2007 07:55:13 -0500

Silver in appearance, Quartz-Coat(TM) 845-Silver has ceramic-metallic formulation that bonds to glass and quartz halogen lamps. Single-part, water-based, inorganic system absorbs and evenly diffuses light at temperatures to 2,000°F. Formulated to viscosity range of 400-700 cps and solids content by volume of 42.0%, odorless product cures under temperatures from 900-1,000°F for 5 min. Uses include automotive, dental, aircraft, stadium, and fire safety industries.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Water Based Coatings | Metallic Coatings

Rust Preventive meets CA code for MIR reduction.

info@productnews.com (ThomasNet News) — Tue, 17 Apr 2007 07:47:55 -0500

Bloxide aluminized rust-preventive weld-through primer is used to protect steel surfaces from rust where extended periods of outside storage are anticipated. It protects prepared edges and surfaces prior to welding and other heat-joining methods, eliminating need for secondary weld preparation on steel parts. It can be applied by brush, dip, or spray, is temperature-resistant to 800°F, and meets California requirements of less than 1.00 MIR (maximum incremental reactivity).

This story is related to the following:
Paints and Coatings

Search for suppliers of: Primers | Rust Preventives | Aluminum Coatings | Protective Coatings

Metal Thin Film Coating can be fabricated into many forms.

info@productnews.com (ThomasNet News) — Mon, 19 Feb 2007 07:37:12 -0500

Suited for applications in general lighting, medical systems, digital imaging, LED lighting systems, and portable optical systems, HeatBuster® Spectral Metal Thin Film Coating meets severe abrasion, adhesion, humidity, and salt fog tests of Mil-C-675 standards. Stable over temperature and humidity changes, dichroic hybrid coating operates over range of angles, and is designed to be highly reflective over selected bands of wavelengths and minimally reflective over rest of the spectrum.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings

Search for suppliers of: Abrasion Resistant Coatings | Dichroic Coatings | Metal Coatings | Reflective Coatings | Military Specification Coatings