ThomasNet Industrial Newsroom -

Clear Epoxy Encapsulant has pourable formulation.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:27:12 -0500

Bio Clear 810(TM) is solvent free, clear epoxy used for object encapsulation (marine, electronic, and gift industries) as well as poured-on bar top and table top applications. Features include low exotherm kick, slow UV epoxy yellowing, and low viscosity, making it suited for poured applications between 1/4 and one inch thick. Bio Clear 810 has a 2:1 mix ratio.

This story is related to the following:
Paints and Coatings
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Epoxy Coatings | Epoxy Encapsulants

Drying Systems use thermal oxidation to stop contamination.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:37:57 -0500

RDS Drying Systems offer thermal oxidation process designed to eliminate challenge of residue contamination stemming from photovoltaic metallization in order to minimize maintenance and provide cleaner process chamber. Process involves heating gas to temperature greater than 500°C, while arrangement of heater and granulate pack lend to space and energy consumption reduction. In order to oxidize hydrocarbons, catalyzers are installed downstream from heating chamber.

This story is related to the following:
Paints and Coatings
Machinery and Machining Tools
Chemical Processing and Waste Management
Cleaning Products and Equipment
Green & Clean

Search for suppliers of: Metallizing Equipment | Drying Machinery | Drying Systems | Dryers

Protective Coating acts as stain guard for composite wood decking.

info@productnews.com (ThomasNet News) — Mon, 26 Oct 2009 08:53:57 -0500

Designed to overcome decking materials' inherent inclination towards stain retention, API-221F one-component, water-based polymer/oligomer dispersion protects appearance and surface aesthetics of composite wood decking. It crosslinks at ambient temperature to form topical polymeric film with chemical anchors that penetrate into substrate. Resultant clear coating film resists staining from foods, wine, oil, grease, and moisture.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Protectants | Stain Resistant Coatings

Polyurea Primer can be applied to concrete and steel.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:54 -0500

Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by outgassing from concrete substrate. It can be applied via airless spray.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Cement & Concrete Coatings | Steel Coatings | Polyurea Coatings | Primers

Anti-Reflective Coating optimizes efficiency of solar panels.

info@productnews.com (ThomasNet News) — Mon, 28 Sep 2009 08:24:36 -0500

Designed to optimize light transmittance through glass that covers PV panels, SOLARC transparent coating helps maximize PV module efficiency and power output. Coating also minimizes glare from glass, allowing PV panels to blend with surroundings. Compatible with spray, roller, curtain, slot-die, and spin-on coating processes, liquid-based coating protects glass in hot and humid conditions and enables anti-soiling and self-cleaning functionality that prevents dust accumulation.

This story is related to the following:
Paints and Coatings
Green & Clean

Search for suppliers of: Glass Coatings | Anti-Reflection Coatings

Water-based Floorcoatings form protective glass/satin layer.

info@productnews.com (ThomasNet News) — Wed, 23 Sep 2009 08:35:05 -0500

Containing less than 50 g/L VOCs, GP 4408/4409 WB Polyurethane Gloss/Satin topcoats can be used over concrete, terrazzo, or existing coatings in flooring projects. Both breathable, low-odor, waterborne polyurethane floor topcoats are chemically resistant and exhibit UV stability. Light foot traffic is acceptable within 8 hr for 4408 and 6 hr for 4409, and both products offer water-based cleanup and custom color tinting.

This story is related to the following:
Architectural and Civil Engineering Products
Paints and Coatings

Search for suppliers of: Topcoat Coatings | Cement & Concrete Coatings | Corrosion Resistant Coatings | Floor Coatings | Protective Coatings

Bearings feature coating that protects against damage.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:29:02 -0500

With Isotect® A coating, Rolling Element Bearings are insulated from damage caused by passage of electrical current in large AC or DC motors. Coating acts like resistor and capacitor connected in parallel and can be applied to outer or inner ring external surfaces. Depending on operating temperature, coating has resistance ranging from several ohms up to 10 GW. If operating conditions require higher protection, bearings can be assembled with ceramic rolling elements.

This story is related to the following:
Mechanical Power Transmission
Paints and Coatings
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Roller Bearings | Insulating Coatings | Electrical Insulation Coatings

Silicone Release Coating suits filmic applications.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:10 -0500

Offering adhesion to both primed and unprimed polyester films, solvent-free Syl-Off® System includes base coating, anchorage additive, choice of crosslinkers, and platinum catalyst. System uses thermal-cure technology and offers stability against both solvent and water-based acrylic adhesives. Applications include filmic pressure sensitive laminate and labelstock, polyester release films, and release liners for polyester technical adhesive tapes.

This story is related to the following:
Paints and Coatings
Chemical Processing and Waste Management

Search for suppliers of: Silicone Coatings | Release Coatings

PCB Conformal Coating cures tack free in less than 5 min.

info@productnews.com (ThomasNet News) — Wed, 09 Sep 2009 08:36:00 -0500

With ability to maintain low modulus over temperature range of -65 to +200°C, Master Sil 773 is formulated to provide protection to electronic circuitry in high humidity environments as well as upon exposure to shock and vibration. One part, ultra low viscosity silicone conformal coating can be applied by dipping, spraying, brushing. Coating offers volume resistivity of 1x1014 W-cm, dielectric strength of 25 kV/mm, dielectric constant of 3.3, 60 Hz and dissipation factor of 1x10-4.

This story is related to the following:
Paints and Coatings
Chemical Processing and Waste Management

Search for suppliers of: Moisture Cure Coatings | Printed Circuit Assembly Coatings | Protective Coatings | Silicone Coatings | Conformal Coatings | Transparent Coatings

Overprint Varnishes cure instantly upon UV light exposure.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:26 -0500

Available in matte, satin, and gloss finishes, DigiGuard® UV Series cures and dries instantaneously when exposed to UV light to form protective surface on paper and film printed on HP Indigo presses. Solvent free material, able to be used to produce high gloss levels, offers protection against mechanical rubbing and is approved by HP for use on HP's UV Coater. Certain grades are also designed for optimal performance during subsequent hot-foil stamping, imprinting, or gluing.

This story is related to the following:
Chemical Processing and Waste Management
Paints and Coatings

Search for suppliers of: Synthetic Resin Base Varnishes | Paper Coatings

Air Barrier Coating protects rough openings.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:25 -0500

Suited for rough openings and transition detailing in above grade wall construction, StoGuard RapidSeal(TM) eliminates mesh, fabric, and tapes when used with StoGuard coatings. One-component air barrier and waterproof material installs down to 33°F, cures in wet weather, and adheres to damp substrates without blistering or increase in drying time. Product is compliant with all national, state, and local VOC regulatory requirements, and qualifies for LEED credits.

This story is related to the following:
Paints and Coatings
Safety and Security Equipment
Green & Clean

Search for suppliers of: Waterproof Coatings | Air Barriers

Dry Film Adhesive cures at 150°C.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:24 -0500

Pre-manufactured with thickness uniformity, DuPont(TM) PerMX(TM) 3000 can cover or tent holes in substrate and provide reliable bonding in 5 min cycle. Negative tone, photodielectric epoxy material offers both corrosion and chemical resistance. With greater than 4:1 aspect ratio, straight vertical sidewalls, and thermal resistance, product is suited for applications in 3D, through silicon via, and wafer level packaging of electronic components and microelectromechanical systems.

This story is related to the following:
Paints and Coatings
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Dry Film Coatings | Epoxy Adhesives | Photoresists

Stain Blocking Coating protects concrete surfaces.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:24 -0500

Formulated as water-based hybrid resin system, API-278 Stain Blocking Polish(TM) provides deep-penetrating, high-gloss, stain-resistant finish for new densified concrete surfaces. It can be used as primary coating or as protective layer under traditional concrete polish systems. Surfaces coated with API-278, which forms non-sacrificial surface that can be buffed/burnished to high gloss, will exhibit resistance to wear, moisture, and staining.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Wear Resistant Coatings | Water Based Coatings | Corrosion Resistant Coatings | Coating Resins

High-Temperature Coating minimizes glare in halogen lamps.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Suited for applications to 1,500°F, Quartz-Coat(TM) 845-Blue is a cobalt-aluminate pigmented formulation that bonds well to glass and quartz halogen lamps. Single part, water-based, odorless, inorganic system is blue in appearance and is able to absorb and evenly diffuse light. Formulated to viscosity of 400-700 cp and solids content by volume of 61.0%, product is applied by dipping or spray equipment. After curing, finish is moisture-resistant, and no outgassing will occur.

This story is related to the following:
Paints and Coatings

Search for suppliers of: High Temperature Coatings | Heat Resistant Coatings | Glass Coatings

Aluminum Blackening Material works on prototype scale.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:33 -0500

Suited for manufacturers that require same-day black finishing of small lots of aluminum parts, mini BK-LC series safely blackens parts in-house and achieves satin black finish. LUMICLAD process, which takes ~30 min, utilizes dip-tank procedure to form black oxide coating on aluminum while utilizing only one heated tank and eliminating requirements for electrolytic current. LUMICLAD finish is 1.5 microns thick and will not shrink hole diameters or add measurable thickness.

This story is related to the following:
Paints and Coatings
Materials and Material Processing

Search for suppliers of: Black Oxide Finishes | Black Oxides | Black Oxide Equipment & Supplies

Membrane imparts waterproofing, anti-fracture properties.

info@productnews.com (ThomasNet News) — Mon, 17 Aug 2009 08:30:12 -0500

Intended for interior/exterior applications over any substrate, Hydro Barrier(TM) load-bearing, self-curing, liquid rubber polymer can be applied for flexible, seamless waterproofing and anti-fracture protection up to industry standard of 1/8 in. It has load-bearing Extra Heavy service rating per ASTM C627 and accelerates installations by not requiring fabric in field and being ready for flood testing within 24 hr of cure. Microban protection also prohibits growth of mold and mildew.

This story is related to the following:
Paints and Coatings

Search for suppliers of: Waterproof Coatings | Architectural Coatings

Spray Coating increases thermowell life.

info@productnews.com (ThomasNet News) — Thu, 13 Aug 2009 08:28:44 -0500

Able to be applied in thicknesses exceeding 2.54 mm and up to 5.08 mm, SDC-4 plasma flame sprayed coating increases life of thermowells in critical Fluid Catalytic Cracking Units (FCCU) in oil refineries and also reduces associated maintenance/repair. Solution is applied to tip of thermowells, providing corrosion resistance in harsh operating temperatures and pressures. Coating does not alter/distort component or substrate.

This story is related to the following:
Services
Paints and Coatings

Search for suppliers of: Coating Services | Corrosion Resistant Coatings

Coating offers corrosion protection to 1,500°F.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:47 -0500

Formulated using waterborne silicate binder system filled with blend of stainless steel and ceramic corrosion inhibiting pigments, Corr-Paint(TM) CP3015-SS is suited for coating carbon steel and cast iron heat exchangers, boiler components, and exhaust headers. Single part coating system is supplied in ready-to-use viscosity of 500-1,000 cP, is applied using conventional spray equipment, and dries to typical film thickness of 2-3 mils.

This story is related to the following:
Paints and Coatings

Search for suppliers of: High Temperature Coatings | Water Borne Coatings | Protective Coatings | Corrosion Resistant Coatings | Ceramic Coatings | Stainless Steel Coatings

Roof Coating provides thermal insulation.

info@productnews.com (ThomasNet News) — Fri, 07 Aug 2009 08:37:14 -0500

Designed for sloped roofs, Nansulate® Crystal clear protective coating provides thermal insulation, as well as resistance to UV, mold, and mildew. Coating can be applied over colored tile, barrel tile, clay tile, slate, wood shingle, and asphalt shingle roofs to provide energy savings by minimizing heat transfer through roof.

This story is related to the following:
Paints and Coatings
Green & Clean

Search for suppliers of: Roof Coatings | Protective Coatings | Insulating Coatings | Clear Coatings

Epoxy Coating checks mildew growth in damp, humid locations.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:43 -0500

Supplied as 2-package industrial coating, Tile-Clad® High Solids Mildew Resistant epoxy protects against mildew growth on exterior surfaces where dampness and humidity are of concern. It features gloss finish and is offered in variety of safety colors. Applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment where mildew growth must be guarded against in order to maintain operations.

This story is related to the following:
Materials and Material Processing
Paints and Coatings

Search for suppliers of: Mildew Resistant Compounds | Mildew Preventive Paints | Epoxy Coatings