ThomasNet Industrial Newsroom -

Compactor/Baler provides over 12,000 lb crushing power.

info@productnews.com (ThomasNet News) — Fri, 06 Nov 2009 08:43:09 -0500

Combining trash compactor and cardboard baler, Model GTS 2000 is capable of reducing trash volumes by 80% or more. Compactor is coated with Kevlar-based polyethylene fiber that makes it virtually indestructible. Powered by hydraulic pump and electric motor, system is operated by computer technology, which allows it to be fully programmable.

This story is related to the following:
Chemical Processing and Waste Management
Packaging Products & Equipment

Search for suppliers of: Garbage, Refuse, Rubbish, Trash & Waste Compactors | Balers | Corrugated Carton, Case & Box Balers

Packaging Cell provides 150 picks per minute.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:04 -0500

Featuring one 4-axis robot and one 6-axis robot, Duet Packer Cell can pack individual products into shipping cases or containers at rate of 150 picks/min with capacity of 45 lb per pick. System includes integrated feed conveyors, Rockwell Micrologix PLC, and Panelview Plus 600 HMI interface. Pre-engineered to facilitate install and start-up, Duet Packer Cell meets stringent RIA and ANSI standards.

This story is related to the following:
Robotics
Packaging Products & Equipment

Search for suppliers of: Robotic Case Packaging Equipment | Packaging Systems | Packaging Machinery

Horizontal Baler provides 96 tons of compression force.

info@productnews.com (ThomasNet News) — Mon, 26 Oct 2009 08:54:04 -0500

Featuring ½ in. plate construction with 1 x 4 in. thick reinforcement, Piranha® Closed Door Horizontal Baler provides 110 lb/in² ram face pressure. Machine can handle paper stock, secondary fiber, aluminum/steel cans, PET, and HDPE. In addition to hydraulic door actuator and serrated shear knife, baler has category 3 safety system on conveyor hopper access door. Access to hopper is protected by dual circuit magnetic safety switch and dual trapped key interlock system.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Plastics Balers | Paper Balers | Aluminum Cans & Bottles Horizontal Balers | Horizontal Balers

Horizontal Baler fits in tight spaces.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:24 -0500

Featuring 18 x 7 ft footprint, HLO 5443 offers baling cycle time of 7.6 sec using twin 25 hp motors. High volumetric displacement enables production rates up to 14 tons/hour. Economy mode shuts down one 25 hp motor to save energy, while rear access doors enable access to cylinders, and stamper automatically removes jams at shear knife. With max operating pressure of 3,000 psi and ram face pressure of 114 psi, baler is suited for processing OCC, ONP, PET, and plastics.

This story is related to the following:
Packaging Products & Equipment
Waste Handling Equipment

Search for suppliers of: Corrugated Carton, Case & Box Balers | Paper Balers | Horizontal Balers | Plastics Balers | Recycling Equipment

Horizontal Baler is less than 15 ft long.

info@productnews.com (ThomasNet News) — Mon, 19 Oct 2009 08:37:55 -0500

Harris HSO4529 50 hp baler features cycle times of 6.5 sec and volumetric displacement/production throughput for shredded OCC of up to 14 tons/hr and for shredded news up to 16 tons/hr. Maximum operating pressure is 3,000 psi and ram face pressure is 89 and 120 psi. In economy mode, one 25 hp motor shuts down to conserve energy. Baler features rear access door, for access to cylinders, and enclosed power unit with hinged wire tie inserters and twister units to simplify access.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Horizontal Balers

Fractional Quart Carton Caser can pack 240 cartons/min.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:08 -0500

Utilizing 4 x 4 pack pattern, Fractional Quart Carton Caser packs quart (1 L), pint (500 mL), and ½ pint (250 mL) cartons. Servo control load head adjusts to various fractions of quart size cartons, is height adjustable, and comes with dual in-feed carton conveyors, case conveyor, and line breaks. Constructed of stainless steel, caser suits wet environments found in dairy and beverage facilities. Options include conveyor extensions and motor controls for incoming conveyors.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Casers | Case Packing Machinery | Box, Carton & Case Packers

Canister Dispenser suits healthcare product packaging.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Dispensing up to 325 canisters/min, APA-9000 features Allen-Bradley PLC as well as dual gravity feed bowls that run alternately to ensure FIFO control and are fed from dual respective hoppers with cleated conveyor. Each hopper accommodates 4,000 canisters from single pail or box. System includes servo-motor operated bottle indexing screw for bottling applications. Unit is also suitable for VFFS, flow wrapper, thermoform, and pouching machinery.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Packaging Products & Equipment

Search for suppliers of: Automatic Dispensers | Drug & Pharmaceutical Packaging Machinery

Space-Saving Packaging Cell automates manual packing.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:44 -0500

Offered as turnkey solution for packaging individual products, modular and portable Solo Packer Cell delivers flexibility that allows for constant product changes or accelerated deployment of new product packaging. Pre-engineered system packs at rates to 30 layer picks/min and picks up to 45 lb per pick. Components include 4- or 6-axis robot, integrated feed conveyors, Rockwell Micrologix PLC, and Panelview Plus 600 HMI. Also, stand-alone control system facilitates product changes.

This story is related to the following:
Packaging Products & Equipment
Robotics

Search for suppliers of: Packaging Equipment | Packaging Machinery | Order Pickers | Pick & Place Packaging Robots

All-Polyester Lidding promotes downstream recyclability.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:46 -0500

StreamOne(TM) is engineered to replace traditional mixed-polymer laminates without sacrificing performance when sealing to PET/PETG trays. Available in thickness from 1-2 mil, with 1 mil PET and .5 mil proprietary polyester peelable sealant, lidding features 100% polyester construction that enables product to be recycled in number one stream along with tray. Tamper-evident feature, included, turns white at point of contact with tray when it is removed without leaving residue on flange.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Lidding | Plastic Lids

Bagging System suits high-speed food applications.

info@productnews.com (ThomasNet News) — Wed, 07 Oct 2009 08:41:07 -0500

Offering packaging speeds up to 150 bags/min, SidePouch® FAS SPrint Revolution(TM) Bagging System presents conveyor of pre-opened bags that are ready for loading from 60 in. wide workspace. System operates in continuous, intermittent, or batch modes, and cycles on pre-set parameters or by using foot switch. Featuring stainless steel construction, system has 90° tilting load area, corrosion-resistant materials, NEMA 4X electronics protection, and Allen-Bradley® control package.

This story is related to the following:
Packaging Products & Equipment
Machinery and Machining Tools

Search for suppliers of: Packaging Equipment | Packaging Machinery | Bagging Equipment | Bagging Machinery | Food & Beverage Packaging Machinery

Monoblock Filler/Capper handles over 100 micro-tubes/min.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:07 -0500

Along with infeed design that delivers tubes directly into zero-backlash turret, Monoblock Filler/Capper for Micro-Tubes and Micro-Vials features capping station and magnetic stainless steel clutch system. Servo filling and capping design allows MB 120 to handle 100+ micro-tubes per minute (MTPM), and color touch screen is used to adjust pump fill rates as well as servo controls for diving nozzles. While MB 60 fills up to 60 MTPM, mechanical, single-pitch MB 40 fills up to 40 MTPM.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Packaging Products & Equipment
Machinery and Machining Tools

Search for suppliers of: Filling Machinery | Vial Filling Machinery | Capping Machinery | Cappers

Hot Sheet Thermoformer features direct extrusion design.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:01 -0500

B-Series Hot Sheet Thermoformer integrates sheet extruder close to machine and roll stack at entrance end, allowing material to be extruded directly onto conditioning rolls within it, helping save energy. Sheet with high core temperature creates forming conditions that enable precise material distribution, allowing use of 2-stop oven instead of 4 or 5-stop oven, which also saves energy. Available in sizes up to 50 x 60 in., system is configurable for production with wide variety of materials.

This story is related to the following:
Green & Clean
Packaging Products & Equipment
Machinery and Machining Tools

Search for suppliers of: Thermoforming Machinery

Thermoforming Trim Press offers servo treadle option.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:08 -0500

Separating treadle movement into 2 independent motions, Servo Treadle Option allows punch to pilot into product prior to entering die, ensuring trim concentricity tolerances as low as ±.005 in. Sliding treadle is controlled through independent servo motor, giving treadle movement flexibility in positioning product for trimming. Treadle speed is electronically matched to press speed to ensure precise timing as speed of press is accelerated or decelerated.

This story is related to the following:
Machinery and Machining Tools
Packaging Products & Equipment

Search for suppliers of: Trimming Presses | Thermoforming Presses

Thermoformers are optimized for productivity, consistency.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:08 -0500

Quad Series incorporates forming station, featuring up to 260 tons of holding force and 150 tons of coining force, that lends to precise and consistent thermoformed product by ensuring virtually zero deflection across entire mold area. Also available, roller screw third motion technology enhances material distribution, reduces starting gauges, and promotes process window. Mold area sizes vary up to 64 x 64 in., with capabilities to produce parts with depths of 4-12 in.

This story is related to the following:
Packaging Products & Equipment
Machinery and Machining Tools

Search for suppliers of: Thermoforming Equipment | Thermoforming Machinery

Water-Based Heatseal is designed for recycled PET.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:07 -0500

Offering options for offset, flexographic, and roll coat application, Latiseal® B7707AR provides perfectly bonded recycled RPET blister packages and does not crystallize over time. This 100% VOC-free solution, FDA-approved for indirect food contact, exhibits in-line wet trappable (wet inks) qualities and exhibits clarity with no milking of dark inks. Also available, water-based Latiseal® B7780AR for regular PET is formulated for in-line applications over wet inks.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Packaging Products & Equipment
Green & Clean

Search for suppliers of: Adhesive Sealants | Heat Sealing Components

Multi-packer eliminates need for trays or pads.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:40 -0500

With single, double, and three lane configurations, Tritium(TM) Multipacker arranges products into compact multi-pack patterns and wraps them in printed or registered film. Bundler features Robo-Wand wrapping section, servo-driven film cutting system, wrinkle-free bull's eye and bottom seal, and pull-out film feed module. Modular stainless steel bundler comes equipped with transparent, safety-interlock gull wing guard doors which provide clear view of all moving belts and chains.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Stretch Wrap Bundlers | Bundle Wrapping Packaging | Packaging Machinery

Air Valve Packaging System protects product against moisture.

info@productnews.com (ThomasNet News) — Mon, 31 Aug 2009 08:35:51 -0500

Consisting of membrane, baffle film, and permanent adhesive, air valve system protects product from moisture and contaminants, equalizes air pressure during transit and improves pallet stacking and stability. Companies can integrate necessary machinery into existing packaging lines for in-house production, or purchase ready for use packaging pre-equipped with plain or printed air valves. Applications include flexible and rigid packaging for chemicals, pet food, and granular materials.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Moisture Barrier Packaging | Protective Packaging | Packaging Systems

Multipacking System offers 3 different configurations.

info@productnews.com (ThomasNet News) — Thu, 27 Aug 2009 08:40:05 -0500

Able to be configured as multipacker, shrink labeler, or combination multipacker/shrink labeler for individual products, Model R-300 accommodates rigid packages, cartons, bottles, cans, and special shapes. Machine is equally suitable for packages that are identical, as well as packages that are different in type and size. Offering tool-less changeover, R-300 can run thin gauge material ranging from 1.5-2 mils and accommodates PETG, PVC, OPS, and PLA films.

This story is related to the following:
Packaging Products & Equipment
Labels, Tags, Signage and Equipment

Search for suppliers of: Shrink Packaging & Wrapping Machinery | Packaging Machinery | Labeling Machinery | Labelers & Labeling Equipment, Machinery & Systems

Strip Pack Applicator offers speeds of up to 80 bags/min.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:30:01 -0500

Capable of producing ready-to display strips of bagged products, Flexible Strip Pack Applicator (F-SPA) suits snacks and confectionery, and other food/non-food products. It takes bags weighing up to 100 g and bags can also be reattached after removal using strip-pack tape. Product can be integrated with any bagmaker for automatic production and thus to operate as integrated component of automatic packing line, or to be used as stand alone unit with bags hand-fed by operator.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Packaging Products & Equipment

Search for suppliers of: Applicators | Strip Packaging Machinery

Vertical Bagger offers in-field upgrade options.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:29:58 -0500

Suited for variety of food and non-food applications, intermittent SVI Series produces bags with corner seal and doy style bags with optional zippers. Production of doy style bag can be performed by turning machine cross seal jaws to 90° position. With outputs from 10-120 bags/min, SVI 4020 packages bags with max width of 400 mm, while SVI 2620 forms bags with max width of 260 mm. There is no need to adapt machine height or dosing platform when package style is changed.

This story is related to the following:
Machinery and Machining Tools
Packaging Products & Equipment

Search for suppliers of: Bagging Machinery | Bag Making Machinery