ThomasNet Industrial Newsroom -

Strain and Temperature Sensor has up to 40 km sensing range.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:27 -0500

Foresight(TM) Fiber Optic Distributed Strain and Temperature Sensor (DSTS) uses Brillouin scattering in optical fibers to measure changes simultaneously in both temperature and strain along length of standard optical fiber, with spatial resolution as short as 5 cm. By wrapping or embedding a fiber inside any structure such as oil pipeline or dam, users can detect when that structure is being strained or heated/cooled and allow the problem to be corrected before failure occurs.

This story is related to the following:
HVAC
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Sensors | Strain Sensors | Temperature Sensors

Fiber Optic Array Sensor detects small components.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Apr 2008 07:45:38 -0500

With beam spread of 28 mm that detects objects in any position across area of light transmission, LFP-1011-020 solves problem of capturing, counting, and controlling small components produced by high-speed manufacturing machinery. Use with 5 kHz amplifier optimizes small component detection, while use of blue-light emitting amplifier enables detection of small black rubber components. Each multi-beam head is supplied with 2 m of polymer fibers that can be cut to length.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Presence Sensors | Position Sensors | Fiber Optic Sensors

Photoelectric Sensors feature compact, 29 mm deep housing.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Feb 2008 07:25:22 -0500

Suited for packaging and assembly environments, ML17 Tru-Vue(TM) Series fiber optic sensors provide typical sensing range of 100 and 400 mm for diffuse and thru-beam fiber optic cables, respectively. They offer 360Â° visibility LEDs, 5 connection options, and 4-in-1(TM) outputs which enable single sensor to operate in NPN NO/NC and PNP NO/NC configurations. Photoelectric sensors can be mounted via industry-standard M18 threaded snout or thru-holes.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Fiber Optic Sensor detects true colors in workpieces.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Feb 2008 07:34:19 -0500

Utilizing 10 mm wide amplifier with White LED, Model E3X-DAC measures changes in RGB parameters and processes them as ratio, so they are unaffected by light-intensity variations. One-touch teaching facilitates setup in registering colors, while smart functions optimize positioning of target objects for detection. Sensor includes timer function with variable ON or OFF delay up to 5 s, and response time of 60 Âµs, making it suitable for detecting registration marks on packaging.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Color Sensors

Photoelectric Sensors are immune to ambient light sources.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:33 -0500

Available in fiber optic and background suppression models with visible red and Class 2 laser light sources, Series V18 cylindrical photoelectric sensors feature adjustable focus and sensitivity settings. Rugged sensors feature automatic mutual interference protection and 18 mm dia cylindrical metal housing with straight or right angle sensing configurations. They can automatically determine their output without external influence.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Photoelectric Sensors

Fiber Optic Sensors feature 4-in-1 output.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Apr 2007 07:51:58 -0500

Provided in 29 mm deep housing, ML17 Tru-Vue(TM) series photoelectric sensors are mounted via M18 threaded snout or thru-holes and secure cables with quarter-turn locking mechanism. Products offer 360Â° visibility LEDs, 5 connection options, and 4-in-1(TM) outputs, which enable one sensor to operate in NPN NO, NPN NC, PNP NO, or PNP NC configurations. While typ sensing range is 100+ mm for diffuse fiber optic cables, 400+ mm is standard for thru-beam fiber optic cables.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Photoelectric Sensors | Fiber Optic Sensors

Fiber Optic Safety Grid is rated for explosive atmospheres.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Feb 2007 07:17:29 -0500

Designed for personnel safety and equipment protection applications, PICO-GUARD(TM) Grids provide optically based, non-contact solution for perimeter and access guarding. Products are available with 2, 3, or 4 beams that can function as emitter or receiver. Preconfigured for proper beam spacing from 300-584 mm, grids perform at ranges up to 31 m and protective heights to 1,066 mm. Anodized aluminum, MEK-resistant protective housing is standard, and fiber lengths range from 2.4-30 m.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Safety and Security Equipment
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Perimeter Guarding Systems | Machinery Guards | Safety Guards

Fiber Optic Sensors feature programmable, NPN/PNP outputs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Nov 2006 07:41:24 -0500

With supply voltage of 10-30 Vdc and sensing distance of 10-200 mm, AF fiber optic sensors feature sensitivity adjustment along with keyboard to ensure that adjustments cannot be changed. Connection to sensors is made using standard sensor cables equipped with M8 connectors. Compact units can be din-rail mounted and are suited for detecting small parts, sensing marks and contrasts on packages, and presence control on automated equipment.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors

Fiber Optic Sensors feature dual 4-digit display.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Jun 2006 08:11:06 -0500

Available with NPN or PNP outputs, Accu-Vue(TM) Fiber Optic Amplifiers incorporate one-touch auto-teach, and built-in timer functions ranging from 250 Âµsec to 20 sec. Sensor features auto power control to maintain constant light emission level over life of sensor and adjustable response times of 50 Âµsec. Applications include parts presence, label detection, error proofing, and thread detection.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Fiber Optic Amplifiers

Safety Elements enable flexible perimeter guarding.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Aug 2005 08:08:54 -0500

Non-contact fiber optic PICO-GUARDâ"¢ Points enable multiple emitter and receiver points to be arranged to create customized optical safety grid that meets Safety Category 4 requirements. Resistant to damage from moisture and debris, IP67-rated products operate with light and use no electricity. Safety elements with 12 mm polycarbonate threaded barrel have operating range of 1.5â�"6.4 m, whereas 30 mm stainless steel threaded barrel models operate over 8.5â�"28.7 m range.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Safety and Security Equipment
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Receivers | Perimeter Guarding Systems | Fiber Optic Sensors

Pressure Sensor withstands extreme temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Jul 2005 08:10:15 -0500

With temperature range up to 840Â°F, fiber optic Model FOP-MH tolerates harsh environmental conditions of aerospace, defense, and automotive applications. It offers accuracy less than 1% FS with resolution as high as 0.1% FS. Unit is compatible with FISO's line of fiber optic signal conditioners, allowing acquisition speeds up to 200 kHz.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Pressure Sensors

Fiber Optic Sensor is available in 3 versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Jul 2005 08:15:14 -0500

Offering 4-mode power and speed settings, D10 Expertâ"¢ with Numeric Display provides 2 discrete outputs in same sensor, or 1 discrete output and 4-20 mA current or 0-10 Vdc analog output in same sensor. D10 Expertâ"¢ with Bargraph Display features 8-segment display, while Discrete Output D10 model features 12-turn manual sensitivity adjustment and pulse rate LED for signal strength indication. Both offer bipolar discrete output with one current sourcing and one current sinking.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors

Pressure Sensor targets acoustic/microphone applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Jun 2005 08:00:53 -0500

Fiber optic Model FOP-MA has resolution as low as 0.0075 psi, frequency response up to 30 kHz, and operating temperature of -20 to 150Â°C. With 1.25 mm OD tip and 155 Âµm OD fiber optic cable, unit is tolerant to cable bending and insensitive to high levels of EMI/RFI interferences.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Pressure Sensors | Fiber Optic Sensors

Multi-Parameter Test Kit is fiber-optic based.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 May 2005 08:00:09 -0500

Dynamic Multi-Parameter Test Kit comes with BUS Commander Software and variety of Fabry-Perot fiber optic sensors, including temperature, pressure, strain, and refractive index sensors. BUS signal conditioner and acquisition system is configured with 2 channels, offering simultaneous reading with sampling rate to 1,000 Hz. System is upgradeable to up 8 channels per chassis, can be cascaded, and can be controlled from remote computer.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Test Kits | Fiber Optic Sensors

Fiber Optic Sensors withstand harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Jan 2005 08:16:54 -0500

Offered in 18 mm threaded-barrel mount or side-hole mount, WORLD-BEAMÂ® QS18 Glass Fiber Optic Sensors are suited for confined locations or for piping fiber into wet, abrasive, corrosive, or high-temperature environments up to 480Â°C. Units work with thousands of glass fiber options.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors

Fiber Optic End Tip features integrated side-view lens.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Nov 2004 08:16:24 -0500

Ultra-miniature Model PLIS-1 measures 3 x 3 mm with low beam divergence angle of 2Â° for sensing small profile targets, such as semiconductor wafer mapping. Unit features stainless steel housing, polycarbonate reflector/lens, and Santopreneâ"¢ strain relief. Fibers can embed in wafer handlers, end effectors, and space-limited machine geometries, and are suited for applications requiring low-contrast, opposed-mode fibers with collimated sensing beam.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Photoelectric Sensors

Fiber Optic Sensor features hybrid structure.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Oct 2004 07:42:39 -0500

Integrating illumination optics and receiver circuitry in sensor head, Series CZ-V20 employs 3 separate, high-intensity RGB LED light sources, which transmit red, green, and blue light onto target surface. Fiber optic cable transmits RGB light through optical system in sensor head, producing uniform beam spot. Polarizing filter cancels reflections from glossy surfaces. Detection performance is virtually unaffected by shape, position, angle, or surface luster.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors | Color Sensors

Optical Sensor is field deployable in harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jun 2004 07:54:19 -0500

AltoWave5500 optical sensor interrogator applies semiconductor laser with nanosecond electronic tuning capability. Equipped with embedded PC, unit is software programmable and capable of storing and analyzing large quantities of data. AltoWave5500 is available as stand-alone unit for lab and test use or in OEM format for integration into final systems. It is suited for Oil and Gas, Civil Engineering, Petrochemical, and Smart Structure applications.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors

Fiber Optic Sensor features power tuning function.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Aug 2003 08:06:23 -0500

With push of a button, Model E3X-DAS automatically shifts power level to optimum level for any sensing condition. Dual display allows user to view both set point and current incident level simultaneously. Auto Power Control circuit compensates for LED degradation, and 4-element LED further reduces degradation to absolute minimum. Sensor includes differential mode, counter function, remote input, and function lock that prevents sensor tampering.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Sensors

Digital Fiber Sensor combines 2 amplifiers in one housing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2003 08:16:09 -0500

Equipped with power tuning function that enables unit to automatically adjust to sensing condition, E3X-MDA employs built-in and/or logic output that eliminates need for separate PLC or sensor controller. Function lock mode locks all sensor functions to protect sensor setting integrity. Product is suited for limited-space applications where positioning and detection need to be synchronized, such as material handling and packaging sorting operations.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Digital Sensors | Fiber Optic Sensors