ThomasNet Industrial Newsroom -

Fusion Splice Protector is offered in 2 different ODs.

info@productnews.com (ThomasNet News) — Fri, 09 May 2003 07:35:31 -0500

Fiber optic SpliceGuardâ"¢ utilizes proprietary Hermacrimpâ"¢ seal to protect fusion splice from water, humidity, corrosive environments, and particulate contamination. With operating temperature range of -40 to +150°C, product handles pressures to 500 psi. Available in 0.150 and 0.100 in. 0Ds with 1.5 in. lengths, product allows for maximum utilization of space and is color-coded for various types and sizes of fiber.

This story is related to the following:
Optics and Photonics

Polishing Fixture/Film suits fiber optic installers.

info@productnews.com (ThomasNet News) — Thu, 19 Dec 2002 07:41:38 -0500

With grooved face, plastic polishing fixture Model 45-342 is suited for use with ST, SC, and FC connectors with 2.5 mm ferrules. Precision manufactured center hole diameter assures that ferrule is kept perpendicular to polishing surface. Aluminum oxide polishing film provides consistency resulting in repeatable connector finishes on ceramic, stainless steel, plastic, and composite ferrules. Single sheet yields range of 10â�"20 connectors when used in 3-step process.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Termination & Splicing Equipment | Fiber Optic Tools | Fiber Optic Assembly Components & Systems

Splice Tray System provides place for safe splicing.

info@productnews.com (ThomasNet News) — Tue, 14 May 2002 08:05:21 -0500

Optical Fiber Splice Tray System (OFST/OFSTH) provides protective environment where excess fiber can be stored and splices may occur without damage to fiber. Splice tray is offered in 2 styles: OFST-1-P for plain tray, and OFST-1-M for managed tray with specific dark fiber storage area. Connected together, trays can be stacked to any height. Trays offer 1 slot on their long side for fiber routing from tray to tray and can be opened from either side.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Termination & Splicing Equipment | Fiber Management Trays

Splice Shelves suit high-density applications.

info@productnews.com (ThomasNet News) — Thu, 02 May 2002 08:11:45 -0500

HRC Shelves accommodate up to 288 fibers and are utilized where splicing within rack or frame is preferred. They are available in 72, 144, 216, and 288 configurations for individual fiber splicing. Higher density capacity can be achieved by using mass fusion splicing within shelf. Shelves can be used as stand-alone units, or can be stacked with other interconnect optical cross connect shelves.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Management Trays

Fiber Cabinet holds up to 216 fibers.

info@productnews.com (ThomasNet News) — Wed, 24 Apr 2002 08:14:36 -0500

Rack-mounted HRC suite, for high density applications such as Fiber-in-the-Metro (FITM) and Fiber-to-the-Business (FTTB), has bend radius controls at all exit ports, strain relief protection, and space for easy access to individual adapters and assemblies. Cabinet can be configured for variety of installation approaches, from pre-terminated to splicing on frame, while retaining maximum rack density. Splicing can be done at factory.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Hardware & Enclosures | Fiber Optic Termination & Splicing Equipment | Fiber Optic Routing Accessories

Optical Fiber Bracket holds up to eight jacketed cables.

info@productnews.com (ThomasNet News) — Tue, 11 Dec 2001 16:28:46 -0500

OFB3P-4-19 bracket has four slots for routing up to eight 3 mm jacketed fiber cables. It snaps into 0.187 in. dia hole in 0.064 in. thick panel for secure mechanical mount, and has anti-rotation pin requiring 0.125 in. dia hole. Bracket is made from V-0 rated flame retardent material.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Routing Accessories

Two-Prong Saddle holds fiber optic cable.

info@productnews.com (ThomasNet News) — Tue, 11 Dec 2001 13:39:36 -0500

Mini Optical Fiber Network Saddle snaps into square hole providing anti-rotational benefit. It has small footprint for tight board space and board storage constraints. Low profile allows airflow to move freely over circuit board for cooling components. Saddle design applies little to no stress on fiber when installing.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Routing Accessories

Fiber Network Saddle holds fiber without stress.

info@productnews.com (ThomasNet News) — Tue, 11 Dec 2001 13:39:36 -0500

Model MOFNSB comes with adhesive backed base for easy placement. Entry point allows almost no resistance to loading based on nominal diameters, placing little to no stress on optical fiber. Low profile allows for better airflow over board, and takes up very little space. Because of its small size, it allows boards to be placed close together.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Routing Accessories