ThomasNet Industrial Newsroom -

Spectrum Analyzer extends analysis up to 20 GHz.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:37:56 -0500

When developing and characterizing radar and electronic warfare systems that operate in X and Ku bands, designers can use Model RSA6120A to set up automated measurements that allow them to understand behavior of transmit waveforms, validate transmitter's design, and debug problems in radar receiver. At Ku-band frequencies, unit features spurious-free dynamic range of 75 dB and 3rd order intercept of +19 dBm above 6 GHz. Flatness across 100 MHz is specified at ±0.7 dB rms and ±1.5° rms.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Signal Analyzers | Spectrum Analyzers

Spectrum Analyzers feature 30 MHz digital demodulator.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:30 -0500

With frequency coverage from 3 Hz to 26.5 GHz and general vector demodulation, 3280A Series allows engineers to analyze transmitter characteristics of wireless devices. Units offer accuracy of ±0.15 dB up to 3 GHz, local oscillator phase noise of less than -115 dBm/Hz, offset of 1 GHz/10 kHz, and +18 dBm third order intermodulation. Windows® XP OS, internal hard drive, and built-in CD-ROM allow for wide range of interfaces, including LAN, USB, RS-232, IEEE 488, and VGA outputs.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Spectrum Analyzers

Automated Fiber Optic Test System has modular design.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:07 -0500

Model GP750 is designed for automated fiber management setups in integrated test systems. Basic chassis comes with control module and power supply module that can be replaced with spares. System has slots that can accommodate up to 8 standard size plug-in units, and these units are designed for hot swappable operations. Control panel includes color display and navigation buttons. Plug-and-play status is shown on screen, and selection of slots and functions can be done via tiered control scheme.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Communication Test Equipment | Fiber Optic Switches

UV-Visible-NIR Spectrophotometer is designed for microscopes.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:52 -0500

Microspectra 10(TM) UV-visible-NIR microscope spectrophotometer can be added to open photoport of any optical microscope to enable it to be used to acquire spectra of microscopic samples. Product is capable of UV-visible-NIR range spectroscopy by absorbance, transmission, reflectance and fluorescence, depending upon microscope's configuration. Suitable applications include in quality control of LCD/OLED displays and thin film thickness measurements of photovoltaic cells.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Infrared Spectrophotometers | Process Spectrophotometers

Spectrophotometer provides deep and vacuum UV measurements.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:51 -0500

Designed for wavelength dispersive spectral measurements from 120-350 nm, Vacuum Ultraviolet Analytical Spectrophotometer (VUVAS) suits analysis, characterization, and test of UV materials and optics, and fundamental research in sensitive, selective UV wavelength region. It provides 0.05%T RSD measurements at fixed wavelength and has stability of over 0.5%T/hr. System includes stainless steel sample chamber, vacuum-prepared internal components, and computer optimized optical system.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Spectrometers | Spectrophotometers

Fiber Optic Power Meter operates between 780-1,700 nm.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:59 -0500

With input range between -43 dBm to 27 dBm, portable fiber power meter, model 3023 is designed for engineers working on single mode optical cable network installation, debugging and maintenance in telecommunications networks, CATV networks, and local network projects. It has backlit LCD screen to display data, and comes with both FC and SC connector. Basic accuracy of instrument is ±1% and meter can work continuously for 20 hr on full charge.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Testers | Power Meters

Active Differential Probes target RF/Microwave instruments.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:57 -0500

Models U1818A and U1818B feature high differential input impedance from 100 kHz to 7 or 12 GHz, respectively, and are compatible with Agilent network, spectrum, and signal source analyzers. Devices provide frequency response of ±1.5 dB and noise less than -130 dBm/Hz at 10 MHz to 12 GHz. They also feature biasing from Agilent's RF and microwave instruments probe power port or bench top power supply.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments
Computer Hardware and Peripherals

Search for suppliers of: Spectrum Analyzers | Signal Analyzers | Network Analyzers | Test Probes

OTDR tests and troubleshoots fiber optic networks.

info@productnews.com (ThomasNet News) — Thu, 24 Sep 2009 08:28:04 -0500

Targeted at short-haul OTDR testing applications, handheld OV-Mini Optical Time Domain Reflectometer tests single-mode and 50/62.5 micron multimode systems. USB stick compatibility and USB cable download aid in data transfer, while OptiTest one-touch testing provides ease-of-use. Transreflective color display displays results clearly, even under extreme sunlight. Unit is available with power meter, visual fault locator and video inspection probe options.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Time Domain Reflectometers | Fiber Optic Testers

Ethernet Media Converter is RoHS compliant.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:29:06 -0500

Designed to convert 1000Base-T signals to 1000Base-X fiber signals and vice versa, SFP (Mini-GBIC) Ethernet media converter extends connection distance between 2 Gigabit Ethernet devices via fiber cable without performance degradation. It conforms to IEEE802.3z standard and supports both full- and half-duplex modes with data transmission rates of 2,000 and 1,000 Mbps, respectively. Backward compatible with 10M, 100M, and 10/100M equipment, unit supports multi- and single-mode fibers.

This story is related to the following:
Optics and Photonics
Communication Systems and Equipment
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Converters | Media Converters | Signal Converters

Fiber Optic Identifier detects signals at 900-1,650 nm.

info@productnews.com (ThomasNet News) — Thu, 10 Sep 2009 08:30:20 -0500

Capable of identifying signal frequency tones of 270 Hz, 1 kHz, and 2 kHz, model A0640002 is suited for telecom, CATV, test lab, and other fiber optic applications. Portable identifier does not require opening of fiber at splice point, ensuring uninterrupted service. Offering low bending loss, device can also detect traffic direction and provides results through illuminated LED.

This story is related to the following:
Test and Measuring Instruments
Computer Hardware and Peripherals
Optics and Photonics

Search for suppliers of: Cable TV Network Test Equipment | Fiber Optic Testers | Telecommunications Testers

Microspectrophotometer utilizes UV-visible-NIR spectroscopy.

info@productnews.com (ThomasNet News) — Thu, 10 Sep 2009 08:30:06 -0500

Designed for accelerated, non-destructive analysis of diverse samples, Microspectra 121(TM) can be configured to image microscopic samples in UV, visible, and NIR regions. Solution integrates spectrophotometer with custom-built UV-visible-NIR range microscope and software. Analysis can be done by absorbance, reflectance, and fluorescence from deep UV to far into near infrared (NIR). Traceable standards are included, as are variable sample measurement areas.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Infrared Spectrophotometers | Spectrophotometers

Optical Multimeter covers wide range of applications.

info@productnews.com (ThomasNet News) — Mon, 31 Aug 2009 08:35:49 -0500

Suited for fiber optic network testing, model A0670017 handheld optical multimeter integrates optical power meter and optical light source modules into compact, lightweight unit. Each module can also function independently and can be switched via menu selection. Device provides stabilized light source of dual-wavelength laser diode with one port output and implements loop-around tests by using both modules. Auto-off function engages when there has been no operation for 10 min.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Fiber Optic Testers | Multimeters

Handheld Power Meter is suitale for field use.

info@productnews.com (ThomasNet News) — Thu, 27 Aug 2009 08:40:06 -0500

Designed for measurement of absolute optical power and relative optical loss, model A0670008 can be utilized in telecom and CATV maintenance and fiber optic test labs. Dust and water resistant unit tests optical power within wavelength range from 800-1,650 nm, and displays test results on high resolution LCD screen in mW, dB, and dBm. It offers calibrated wavelengths of 850, 980, 1,300, 1,310, 1,490,and 1,550 nm, and also offers auto-off function.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Testers | Power Meters

Aluminum Breadboards are suited for OEM optical assemblies

info@productnews.com (ThomasNet News) — Mon, 24 Aug 2009 08:27:43 -0500

LABasix(TM) SA2 series solid aluminum breadboards are machined from 0.5 in. thick 6061 aluminum. Standard grid of tapped holes extends to within 0.5 in. of plate edges; imperial models feature 1/4-20 tapped holes on 1 in. grid while metric models feature M6 tapped holes on 25 mm grid. Counter-bored holes and deep edge chamfers aid in lifting, aligning, and integration of unit onto standard optical tables, while anodized deep black color minimizes surface reflections.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Breadboards

Visual Fault Finder helps detect fiber cable breaks.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:30:02 -0500

Featuring output power of 1.8 mW, 650 Nm visible laser source model A0680001 detects breaks and micro-bends for jacketed fibers, and locates faults at distance of up to 5 km from source. It has FC adapter compatible with SC and ST connectors, works continuously for 25 hr on single charge, and has auto-off timer. Handheld device is suited for testing fiber optic, telecom and CATV networks, and for fiber identification in ribbon or bundled fiber optic pigtails during installation.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Cable Fault Locators | Fiber Optic Testers

Fiber Optic Power Meter features compact and rugged design.

info@productnews.com (ThomasNet News) — Mon, 17 Aug 2009 08:30:18 -0500

Suited for use with single mode fiber optic cable networks, CATV networks, and local networks, model A0670012 tests optical power within wavelength range of 780-1,700 Nm. It features large character LCD screen, auto power-off function, and supports continuous operation of more than 20 hrs when it is fully charged. Lightweight unit is also suited for debugging and maintenance of telecommunication networks.

This story is related to the following:
Test and Measuring Instruments
Computer Hardware and Peripherals
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: Cable TV Network Test Equipment | Power Meters | Fiber Optic Testers

Optical Multimeter is designed for field work.

info@productnews.com (ThomasNet News) — Fri, 14 Aug 2009 08:30:03 -0500

Suited for single mode fiber measurement, Model 2498 can be used as optical power meter, stabile light source, or loss measurement system. It delivers CW mode light signals, and offers measurement resolution of 0.1-1 dB in W display mode or 0.01-0.1 dB in REL display mode. Device carries out optical loss measurement at 0.85, 1.30, 1.31, and 1.55 µm, with measurement range of 3-70 dBm or 20-50 dBm. Choice of power sources include AC adaptor, rechargeable Ni-Cd battery, and dry cells.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Fiber Optic Testers | Multimeters

Portable Visual Fault Locator has pen-shape design.

info@productnews.com (ThomasNet News) — Fri, 07 Aug 2009 08:37:23 -0500

With measurement range of up to 5 km, Model 3C-04 is used for fiber optic identification and fault location on single mode or multimode fiber, and wavelength loss testing. Locator detects breaks and micro-bends even for jacketed fibers, and laser's high power 650 nm can transmit continuous light or adjustable strobe light. Suitable applications include maintenance of fiber optic networks, LAN, FDDI, ATM optical systems, telecommunications, and CATV networks.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics
Sensors, Monitors and Transducers

Search for suppliers of: Fiber Optic Testers | Cable Fault Locators

Spectrophotometer measures color of wet and dry samples.

info@productnews.com (ThomasNet News) — Fri, 07 Aug 2009 08:37:15 -0500

Able to measure any sample accurately from distance of 1.5 in., Model VS450(TM) is suited for measuring cosmetics, wet paint, soil samples, and other wet or powdered substrates. Line of Sight(TM) visibility enables technicians to position sample, while Active Visual Targeting(TM) projects illuminated target ring onto sample for precise measurements. Two aperture sizes of 6 and 12 mm can be switched with click of button, without need to recalibrate instrument.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Spectrophotometers

Multi-channel Analyzer works with scintillation detectors.

info@productnews.com (ThomasNet News) — Mon, 27 Jul 2009 08:30:20 -0500

Completely operable without PC, DigiDART-LF provides users with portable SMART multi-channel analyzer for sodium iodide, lanthanum bromide, and other scintillation detectors. Various measurements can be performed directly in-field or on-site, and internal memory stores spectra. Built-in LCD and control keypad create live display as data is acquired, while design promotes digital stability, optimized data throughput rates, and up to 12 hr of operation from one battery charge.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Spectrum Analyzers | Multichannel Analyzers