ThomasNet Industrial Newsroom -

Multiplexers target high-density CCTV applications.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:36 -0500

Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments
Optics and Photonics

Search for suppliers of: Video Transmitters | Video Multiplexers | Fiber Optic Multiplexers | Digital Multiplexers | Television Receivers

Muxponder maximizes bandwidth on existing infrastructure.

info@productnews.com (ThomasNet News) — Wed, 21 Jan 2009 08:34:54 -0500

Part of OpVista CX8 Optical Networking System, CX-40G Muxponder delivers 40 Gbps transmission/wavelength across optical networks from metro to long-haul. It is based on Dense Multi-Carrier (DMC) technology and combines 4 x 10 Gbs service streams into single 50 GHz Dense Wavelength Division Multiplexing (DWDM) channel. System helps deliver multiple 10-Gbit/sec services and also eliminates issues of PMD and CD optical dispersion.

This story is related to the following:
Communication Systems and Equipment
Test and Measuring Instruments
Optics and Photonics
Electronic Components and Devices

Search for suppliers of: Fiber Optic Telecommunications Equipment | Dense Wavelength Division Multiplexers (DWDM) | Transponders

Flexible Remote Node unifies access and backhaul networks.

info@productnews.com (ThomasNet News) — Thu, 09 Oct 2008 07:36:06 -0500

Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as optical amplifiers and active Ethernet technology that enable reach extension and traffic aggregation.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics
Electronic Components and Devices
Computer Hardware and Peripherals
Communication Systems and Equipment

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM) | Fiber Optic Communication Networks | Optical Network Platforms

DWDM SFP Module features 5 Gbps transmission speed.

info@productnews.com (ThomasNet News) — Thu, 25 Sep 2008 07:38:21 -0500

Enabling expansion of SFP-based board design performance, transceiver can deliver output power from +3 to +6 dBm, has channel spacing of 100 GHz, and offers full C and L band coverage. Optical engines consist of Bookham Avalanche Photodiode (APD) Receiver and buried-heterostructure directly modulated laser. Able to achieve uncompensated reach of 400 km at 2.5 Gbps, solution can operate in high-noise, amplified environments and multi-span links for metro networks.

This story is related to the following:
Optics and Photonics
Computer Hardware and Peripherals
Test and Measuring Instruments
Electronic Components and Devices

Search for suppliers of: Fiber Optic Transceivers | Transceivers | Dense Wavelength Division Multiplexers (DWDM)

DWDM Network Platform is able to serve from metro to core.

info@productnews.com (ThomasNet News) — Wed, 02 Jul 2008 07:49:09 -0500

With multi-service and multi-reach feature set, hiT 7300 supports all reaches and transmission speeds in metro, regional, long-haul, and ultra-long haul applications on single platform. Unit has transponder cards that support traditional SONET/SDH, Ethernet, and SAN services at different speeds. Including amplifier options and end-to-end management support for all equipment configurations, it is also available in flatpack form factor suitable as CPE for tight space requirements.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Optical Network Platforms | Dense Wavelength Division Multiplexers (DWDM)

Muxponder-on-a-Chip targets OTN networks.

info@productnews.com (ThomasNet News) — Fri, 20 Jun 2008 07:38:11 -0500

Suited for ROADM/DWDM applications, MXP(TM) devices address metro networking applications by combining Next-Gen SONET/SDH functions of MSPP and OTN functions of transponder to act as muxponder-on-a-chip. This helps Service Providers utilize their WDM wavelengths more efficiently by allowing them to multiplex number of revenue-generating services on single wavelength. Muxponder cards based on MXP family can address all service types, including Ethernet, SONET/SDH, SAN, and Video.

This story is related to the following:
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM) | Integrated Circuits (IC)

CWDM Optics expand existing fiber capacity.

info@productnews.com (ThomasNet News) — Wed, 16 Apr 2008 07:45:19 -0500

With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration, CORWave enables longer link lengths of up to 30 km.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: Fiber Optics | Wave Division Multiplexers (WDM/DWDM)

Wavelength Selective Switch manages network traffic.

info@productnews.com (ThomasNet News) — Fri, 22 Feb 2008 07:45:49 -0500

Scalable from 1 x 2 to 1 x 9 applications, Mini WSS dynamically supports unpredictable network traffic in metro and access DWDM networks. Switch incorporates all critical functions required for network equipment manufacturers and service providers to remotely add and drop network capacity or change wavelength's path based on demand, without manual intervention or rebalancing of network. Based on MEMS technology, single-slot unit provides colorless switching.

This story is related to the following:
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM)

System provides carrier Ethernet transport solution.

info@productnews.com (ThomasNet News) — Thu, 28 Jun 2007 07:44:16 -0500

Consisting of OpVista2000 TR-110 GbE muxponder, TR-71 10GbE transponder, and Layer 2 functionality, EtherWave(TM) meets network requirements for Ethernet architectural and operational efficiency by combining 10 GbE client side signals into one 10-G ITU-compliant DWDM wavelength on network side. OpVista can handoff 10GbE signal to router located in central office or hub node facility, with individual GbE streams tagged separately to allow distribution to appropriate service.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics

Search for suppliers of: Transponders | Fiber Optic Multiplexers | Ethernet Networking Accessories

Transceiver Module suits 80 km telecom applications.

info@productnews.com (ThomasNet News) — Fri, 13 Apr 2007 07:45:25 -0500

Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

This story is related to the following:
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM) | Optical Transceivers

SFP Transceivers help connect SANs remotely.

info@productnews.com (ThomasNet News) — Thu, 14 Dec 2006 07:43:27 -0500

Covering distances of 10, 40, 80 km, fibre channel CWDM and DWDM interfaces support multi-rate operation at baud rates of 4.25, 2.125, and 1.062 Gb/s, respectively, and Ethernet rate of 1.25 Gbps. CWDM family is available in 18 wavelengths ranging from 1270-1610 nm, while DWDM family supports 46 channels in C-band, from ITU channel 15 through 61.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Interfaces | Dense Wavelength Division Multiplexers (DWDM) | Fiber Optic Multiplexers

LWDM Platform supports all access and metro applications.

info@productnews.com (ThomasNet News) — Tue, 24 Oct 2006 07:51:11 -0500

Featuring Dense Wavelength Division Multiplexing (DWDM) capability, LWDM platform supports 6 CWDM wavelengths operating at 2.5 Gbit/sec, and 16 DWDM wavelengths operating at 2.5/10 Gbit/sec for total capacity of 175 Gbit/sec on single platform. DWDM channels support optical amplification and allow links up to 200 km without use of dispersion compensation.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: Wave Division Multiplexers (WDM/DWDM)

Fiber Optic Products suit military/industrial applications.

info@productnews.com (ThomasNet News) — Mon, 09 Oct 2006 07:48:52 -0500

Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or one-in, one-out couplers for attenuating all wavelengths, are also available.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: Fiber Optic Splitters | Fiber Optic Multiplexers | Fiber Optic Couplers

DWDM Access Transport Platform offers 1.25 Gbps max speed.

info@productnews.com (ThomasNet News) — Tue, 12 Sep 2006 07:51:02 -0500

TurboLIGHT(TM)16 dense wavelength division multiplexing (DWDM) fiber-to-the-x (FTTx) optical access transport platform acts as passive optical network (PON) system that delivers 20 Gbps of symmetrical bandwidth over single feeder fiber. Based on Lambda-PON(TM) automatic wavelength-locking technology, product carries 16, 125 Mbps to 1.25 Gbps bidirectional data streams using 32 independent wavelengths. System comes in modular and complete system forms, both with mixed-mode capabilities.

This story is related to the following:
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM)

Fiber Optic Multiplexers target emission monitoring systems.

info@productnews.com (ThomasNet News) — Wed, 19 Jul 2006 08:06:09 -0500

Designed to multiplex CEMS 4-20 mA and 0-10 Vdc output signals at coal-fired power stations, Fiber Optic Converters monitor sulphur dioxide, nitrogen oxides, and particulate matter. Providing bi-directional communications, Series 2Mxx sends and receives up to 8 analog or digital signals over pair of fiber optic cables. Conversion of analog signals to fiber overcomes application issues such as EMI/RFI, lightning strikes, and ground loop problems.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics

Search for suppliers of: Fiber Optic Converters | Fiber Optic Multiplexers

Optical Subassembly is for use in 10GBASE-LX4 transceivers.

info@productnews.com (ThomasNet News) — Mon, 03 Apr 2006 10:35:30 -0500

Small form factor receive optical sub-assembly, Quad LX4 ROSA multi-filter chip is a 4-channel CWDM optical component consisting of 4 optical filters deposited on single piece of fused silica and used to demultiplex the 10Gbps data into 4 separate 2.5 Gbps channels. Each channel is fitted with its own high-speed photo detector and transimpedance amplifier. Product is designed for use in X2/XPACK transceiver modules.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Subassemblies | Wave Division Multiplexers (WDM/DWDM)

Multiplexer transmits up to 60 km over one fiber.

info@productnews.com (ThomasNet News) — Tue, 19 Apr 2005 07:37:11 -0500

Fiber optic, digital multiplexer transmits 2â�"64 channels of uncompressed video, 2â�"32 channels of bi-directional data and audio, as well as 4 E1 and 100 M Ethernet over single fiber cable. It features ability to add/drop video, audio, RS232/RS422/RS485, E1, and 100M Ethernet ports by plugging in or out service cards. Applications include CCTV, video surveillance, homeland security, and ITS.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Video Multiplexers | Fiber Optic Multiplexers | Digital Multiplexers

Multiplexer Chassis provides up to 12 slots.

info@productnews.com (ThomasNet News) — Tue, 19 Apr 2005 07:37:07 -0500

Model E1 PDH can combine up to 16 E1 and 4-port Ethernet signals in one fiber channel. With 6U height and up to 24 optical channels, unit is suitable for low capacity, point-to-point remote transmission applications. It includes 48 Vdc power supply, complete alarm functions, one RS232 asynchronous interface, and remote loop back functions.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics
Test and Measuring Instruments
Mechanical Components and Assemblies

Search for suppliers of: Fiber Optic Multiplexers | Electronic Equipment Chassis

Wave Division Multiplexers transmit two optical signals.

info@productnews.com (ThomasNet News) — Wed, 13 Oct 2004 07:40:58 -0500

Fiberlink® 6400 Series Passive Optical WDMs allow 2 separate fiber optic links to operate at different wavelengths over same fiber optic core. Each optical signal may carry multiple baseband video, audio, and data channels. Optical signals are transmitted at 850 and 1,310 nm over multimode fiber or 1,310 and 1,550 nm over single mode fiber. Insertion loss ranges from 0.5â�"2.0 dB per output. Units are available in card or box versions with ST or FCPC connectors.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Dense Wavelength Division Multiplexers (DWDM) | Fiber Optic Multiplexers

Multiplexer transmits 8 serial data channels over one fiber.

info@productnews.com (ThomasNet News) — Tue, 23 Sep 2003 08:00:56 -0500

Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports optical transmission distances of up to 37 miles.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: Fiber Optic Multiplexers